This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
authenticationldapaction
Configuration for LDAP action resource.
Properties
(click to see Operations)
Name | Data Type | Permissions | Description |
---|---|---|---|
name |
|
Read-write | Name for the new LDAP action. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after the LDAP action is added. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my authentication action” or ‘my authentication action’). Minimum length = 1 |
serverip |
|
Read-write | IP address assigned to the LDAP server. Minimum length = 1 |
servername |
|
Read-write | LDAP server name as a FQDN. Mutually exclusive with LDAP IP address. Minimum length = 1 |
serverport |
|
Read-write | Port on which the LDAP server accepts connections. Default value: 389 Minimum value = 1 |
authtimeout |
|
Read-write | Number of seconds the Citrix ADC waits for a response from the RADIUS server. Default value: 3 Minimum value = 1 |
ldapbase |
|
Read-write | Base (node) from which to start LDAP searches. If the LDAP server is running locally, the default value of base is dc=netscaler, dc=com. |
ldapbinddn |
|
Read-write | Full distinguished name (DN) that is used to bind to the LDAP server. Default: cn=Manager,dc=netscaler,dc=com. |
ldapbinddnpassword |
|
Read-write | Password used to bind to the LDAP server. Minimum length = 1 |
ldaploginname |
|
Read-write | LDAP login name attribute. The Citrix ADC uses the LDAP login name to query external LDAP servers or Active Directories. |
searchfilter |
|
Read-write | String to be combined with the default LDAP user search string to form the search value. For example, if the search filter “vpnallowed=true” is combined with the LDAP login name “samaccount” and the user-supplied username is “bob”, the result is the LDAP search string “”(;(vpnallowed=true)(samaccount=bob)”” (Be sure to enclose the search string in two sets of double quotation marks; both sets are needed.). Minimum length = 1 |
groupattrname |
|
Read-write | LDAP group attribute name. Used for group extraction on the LDAP server. |
subattributename |
|
Read-write | LDAP group sub-attribute name. Used for group extraction from the LDAP server. |
sectype |
|
Read-write | Type of security used for communications between the Citrix ADC and the LDAP server. For the PLAINTEXT setting, no encryption is required. Default value: PLAINTEXT Possible values = PLAINTEXT, TLS, SSL |
svrtype |
|
Read-write | The type of LDAP server. Default value: AAA_LDAP_SERVER_TYPE_DEFAULT Possible values = AD, NDS |
ssonameattribute |
|
Read-write | LDAP single signon (SSO) attribute. The Citrix ADC uses the SSO name attribute to query external LDAP servers or Active Directories for an alternate username. |
authentication |
|
Read-write | Perform LDAP authentication. If authentication is disabled, any LDAP authentication attempt returns authentication success if the user is found. CAUTION! Authentication should be disabled only for authorization group extraction or where other (non-LDAP) authentication methods are in use and either bound to a primary list or flagged as secondary. Default value: ENABLED Possible values = ENABLED, DISABLED |
requireuser |
|
Read-write | Require a successful user search for authentication. CAUTION! This field should be set to NO only if usersearch not required [Both username validation as well as password validation skipped] and (non-LDAP) authentication methods are in use and either bound to a primary list or flagged as secondary. Default value: YES Possible values = YES, NO |
passwdchange |
|
Read-write | Allow password change requests. Default value: DISABLED Possible values = ENABLED, DISABLED |
nestedgroupextraction |
|
Read-write | Allow nested group extraction, in which the Citrix ADC queries external LDAP servers to determine whether a group is part of another group. Default value: OFF Possible values = ON, OFF |
maxnestinglevel |
|
Read-write | If nested group extraction is ON, specifies the number of levels up to which group extraction is performed. Default value: 2 Minimum value = 2 |
followreferrals |
|
Read-write | Setting this option to ON enables following LDAP referrals received from the LDAP server. Default value: OFF Possible values = ON, OFF |
maxldapreferrals |
|
Read-write | Specifies the maximum number of nested referrals to follow. Default value: 1 Minimum value = 1 |
referraldnslookup |
|
Read-write | Specifies the DNS Record lookup Type for the referrals. Default value: A-REC Possible values = A-REC, SRV-REC, MSSRV-REC |
mssrvrecordlocation |
|
Read-write | MSSRV Specific parameter. Used to locate the DNS node to which the SRV record pertains in the domainname. The domainname is appended to it to form the srv record. Example : For “dc._msdcs”, the srv record formed is _ldap._tcp.dc._msdcs. |
validateservercert |
|
Read-write | When to validate LDAP server certs. Default value: NO Possible values = YES, NO |
ldaphostname |
|
Read-write | Hostname for the LDAP server. If -validateServerCert is ON then this must be the host name on the certificate from the LDAP server. A hostname mismatch will cause a connection failure. |
groupnameidentifier |
|
Read-write | Name that uniquely identifies a group in LDAP or Active Directory. |
groupsearchattribute |
|
Read-write | LDAP group search attribute. Used to determine to which groups a group belongs. |
groupsearchsubattribute |
|
Read-write | LDAP group search subattribute. Used to determine to which groups a group belongs. |
groupsearchfilter |
|
Read-write | String to be combined with the default LDAP group search string to form the search value. For example, the group search filter ““vpnallowed=true”” when combined with the group identifier ““samaccount”” and the group name ““g1”” yields the LDAP search string “”(;(vpnallowed=true)(samaccount=g1)””. (Be sure to enclose the search string in two sets of double quotation marks; both sets are needed.). |
defaultauthenticationgroup |
|
Read-write | This is the default group that is chosen when the authentication succeeds in addition to extracted groups. |
attribute1 |
|
Read-write | Expression that would be evaluated to extract attribute1 from the ldap response. |
attribute2 |
|
Read-write | Expression that would be evaluated to extract attribute2 from the ldap response. |
attribute3 |
|
Read-write | Expression that would be evaluated to extract attribute3 from the ldap response. |
attribute4 |
|
Read-write | Expression that would be evaluated to extract attribute4 from the ldap response. |
attribute5 |
|
Read-write | Expression that would be evaluated to extract attribute5 from the ldap response. |
attribute6 |
|
Read-write | Expression that would be evaluated to extract attribute6 from the ldap response. |
attribute7 |
|
Read-write | Expression that would be evaluated to extract attribute7 from the ldap response. |
attribute8 |
|
Read-write | Expression that would be evaluated to extract attribute8 from the ldap response. |
attribute9 |
|
Read-write | Expression that would be evaluated to extract attribute9 from the ldap response. |
attribute10 |
|
Read-write | Expression that would be evaluated to extract attribute10 from the ldap response. |
attribute11 |
|
Read-write | Expression that would be evaluated to extract attribute11 from the ldap response. |
attribute12 |
|
Read-write | Expression that would be evaluated to extract attribute12 from the ldap response. |
attribute13 |
|
Read-write | Expression that would be evaluated to extract attribute13 from the ldap response. |
attribute14 |
|
Read-write | Expression that would be evaluated to extract attribute14 from the ldap response. |
attribute15 |
|
Read-write | Expression that would be evaluated to extract attribute15 from the ldap response. |
attribute16 |
|
Read-write | Expression that would be evaluated to extract attribute16 from the ldap response. |
attributes |
|
Read-write | List of attribute names separated by ‘,’ which needs to be fetched from ldap server. Note that preceeding and trailing spaces will be removed. Attribute name can be 127 bytes and total length of this string should not cross 2047 bytes. These attributes have multi-value support separated by ‘,’ and stored as key-value pair in AAA session. |
sshpublickey |
|
Read-write | SSH PublicKey is attribute on AD. This attribute is used to retrieve ssh PublicKey for RBA authentication. Minimum length = 1 |
pushservice |
|
Read-write | Name of the service used to send push notifications. Minimum length = 1 |
otpsecret |
|
Read-write | OneTimePassword(OTP) Secret key attribute on AD. This attribute is used to store and retrieve secret key used for OTP check. Minimum length = 1 |
|
Read-write | The Citrix ADC uses the email attribute to query the Active Directory for the email id of a user. Default value: mail Maximum length = 128 |
|
kbattribute |
|
Read-write | KnowledgeBasedAuthentication(KBA) attribute on AD. This attribute is used to store and retrieve preconfigured Question and Answer knowledge base used for KBA authentication. Minimum length = 1 Maximum length = 127 |
alternateemailattr |
|
Read-write | The Citrix ADC appliance uses the alternateive email attribute to query the Active Directory for the alternative email id of a user. Maximum length = 128 |
success |
|
Read-only | . |
failure |
|
Read-only | . |
__count |
|
Read-only | count parameter |
Operations
(click to see Properties)
ADD | DELETE | UPDATE | UNSET | GET (ALL) | GET | COUNT |
Some options that you can use for each operations:
-
Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".
-
Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER:<username>
X-NITRO-PASS:<password>
Note:In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
*Note:
*
Mandatory parameters are marked in redand placeholder content is marked in <green>.
add
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationldapaction
HTTP Method:POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json
Request Payload:
{"authenticationldapaction":{
<b>"name":<String_value>,
</b>"serverip":<String_value>,
"servername":<String_value>,
"serverport":<Integer_value>,
"authtimeout":<Double_value>,
"ldapbase":<String_value>,
"ldapbinddn":<String_value>,
"ldapbinddnpassword":<String_value>,
"ldaploginname":<String_value>,
"searchfilter":<String_value>,
"groupattrname":<String_value>,
"subattributename":<String_value>,
"sectype":<String_value>,
"svrtype":<String_value>,
"ssonameattribute":<String_value>,
"authentication":<String_value>,
"requireuser":<String_value>,
"passwdchange":<String_value>,
"nestedgroupextraction":<String_value>,
"maxnestinglevel":<Double_value>,
"followreferrals":<String_value>,
"maxldapreferrals":<Double_value>,
"referraldnslookup":<String_value>,
"mssrvrecordlocation":<String_value>,
"validateservercert":<String_value>,
"ldaphostname":<String_value>,
"groupnameidentifier":<String_value>,
"groupsearchattribute":<String_value>,
"groupsearchsubattribute":<String_value>,
"groupsearchfilter":<String_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"attributes":<String_value>,
"sshpublickey":<String_value>,
"pushservice":<String_value>,
"otpsecret":<String_value>,
"email":<String_value>,
"kbattribute":<String_value>,
"alternateemailattr":<String_value>
}}
<!--NeedCopy-->
Response:
HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error
delete
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationldapaction/name_value<String>
HTTP Method:DELETE
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error
update
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationldapaction
HTTP Method:PUT
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json
Request Payload:
{"authenticationldapaction":{
<b>"name":<String_value>,
</b>"serverip":<String_value>,
"servername":<String_value>,
"serverport":<Integer_value>,
"authtimeout":<Double_value>,
"ldapbase":<String_value>,
"ldapbinddn":<String_value>,
"ldapbinddnpassword":<String_value>,
"ldaploginname":<String_value>,
"searchfilter":<String_value>,
"groupattrname":<String_value>,
"subattributename":<String_value>,
"sectype":<String_value>,
"svrtype":<String_value>,
"ssonameattribute":<String_value>,
"authentication":<String_value>,
"requireuser":<String_value>,
"passwdchange":<String_value>,
"validateservercert":<String_value>,
"ldaphostname":<String_value>,
"nestedgroupextraction":<String_value>,
"maxnestinglevel":<Double_value>,
"groupnameidentifier":<String_value>,
"groupsearchattribute":<String_value>,
"groupsearchsubattribute":<String_value>,
"groupsearchfilter":<String_value>,
"followreferrals":<String_value>,
"maxldapreferrals":<Double_value>,
"referraldnslookup":<String_value>,
"mssrvrecordlocation":<String_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"attributes":<String_value>,
"otpsecret":<String_value>,
"sshpublickey":<String_value>,
"pushservice":<String_value>,
"email":<String_value>,
"kbattribute":<String_value>,
"alternateemailattr":<String_value>
}}
<!--NeedCopy-->
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error
unset
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationldapaction?action=unset
HTTP Method:POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json
Request Payload:
{"authenticationldapaction":{
<b>"name":<String_value>,
</b>"serverport":true,
"authtimeout":true,
"ldapbase":true,
"ldapbinddn":true,
"ldapbinddnpassword":true,
"ldaploginname":true,
"searchfilter":true,
"groupattrname":true,
"subattributename":true,
"sectype":true,
"svrtype":true,
"ssonameattribute":true,
"authentication":true,
"requireuser":true,
"passwdchange":true,
"validateservercert":true,
"ldaphostname":true,
"nestedgroupextraction":true,
"maxnestinglevel":true,
"groupnameidentifier":true,
"groupsearchattribute":true,
"groupsearchsubattribute":true,
"groupsearchfilter":true,
"followreferrals":true,
"maxldapreferrals":true,
"referraldnslookup":true,
"mssrvrecordlocation":true,
"defaultauthenticationgroup":true,
"attribute1":true,
"attribute2":true,
"attribute3":true,
"attribute4":true,
"attribute5":true,
"attribute6":true,
"attribute7":true,
"attribute8":true,
"attribute9":true,
"attribute10":true,
"attribute11":true,
"attribute12":true,
"attribute13":true,
"attribute14":true,
"attribute15":true,
"attribute16":true,
"attributes":true,
"otpsecret":true,
"pushservice":true,
"email":true,
"kbattribute":true,
"alternateemailattr":true
}}
<!--NeedCopy-->
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error
get (all)
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationldapaction
Query-parameters:
attrs
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationldapaction?attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
filter
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationldapaction?filter=property-name1:property-val1,property-name2:property-val2
Use this query-parameter to get the filtered set of authenticationldapaction resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.
view
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationldapaction?view=summary
Note:By default, the retrieved results are displayed in detail view (?view=detail).
pagination
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationldapaction?pagesize=#no;pageno=#no
Use this query-parameter to get the authenticationldapaction resources in chunks.
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:
{ "authenticationldapaction": [ {
"name":<String_value>,
"serverip":<String_value>,
"servername":<String_value>,
"serverport":<Integer_value>,
"authtimeout":<Double_value>,
"ldapbinddn":<String_value>,
"ldapbinddnpassword":<String_value>,
"ldaploginname":<String_value>,
"ldapbase":<String_value>,
"searchfilter":<String_value>,
"groupattrname":<String_value>,
"subattributename":<String_value>,
"sectype":<String_value>,
"svrtype":<String_value>,
"ssonameattribute":<String_value>,
"authentication":<String_value>,
"requireuser":<String_value>,
"success":<Double_value>,
"failure":<Double_value>,
"nestedgroupextraction":<String_value>,
"maxnestinglevel":<Double_value>,
"followreferrals":<String_value>,
"maxldapreferrals":<Double_value>,
"referraldnslookup":<String_value>,
"mssrvrecordlocation":<String_value>,
"validateservercert":<String_value>,
"ldaphostname":<String_value>,
"groupnameidentifier":<String_value>,
"groupsearchattribute":<String_value>,
"groupsearchsubattribute":<String_value>,
"groupsearchfilter":<String_value>,
"passwdchange":<String_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"attributes":<String_value>,
"otpsecret":<String_value>,
"sshpublickey":<String_value>,
"pushservice":<String_value>,
"email":<String_value>,
"kbattribute":<String_value>,
"alternateemailattr":<String_value>
}]}
<!--NeedCopy-->
get
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationldapaction/name_value<String>
Query-parameters:
attrs
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationldapaction/name_value<String>?attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
view
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationldapaction/name_value<String>?view=summary
Note:By default, the retrieved results are displayed in detail view (?view=detail).
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:
{ "authenticationldapaction": [ {
"name":<String_value>,
"serverip":<String_value>,
"servername":<String_value>,
"serverport":<Integer_value>,
"authtimeout":<Double_value>,
"ldapbinddn":<String_value>,
"ldapbinddnpassword":<String_value>,
"ldaploginname":<String_value>,
"ldapbase":<String_value>,
"searchfilter":<String_value>,
"groupattrname":<String_value>,
"subattributename":<String_value>,
"sectype":<String_value>,
"svrtype":<String_value>,
"ssonameattribute":<String_value>,
"authentication":<String_value>,
"requireuser":<String_value>,
"success":<Double_value>,
"failure":<Double_value>,
"nestedgroupextraction":<String_value>,
"maxnestinglevel":<Double_value>,
"followreferrals":<String_value>,
"maxldapreferrals":<Double_value>,
"referraldnslookup":<String_value>,
"mssrvrecordlocation":<String_value>,
"validateservercert":<String_value>,
"ldaphostname":<String_value>,
"groupnameidentifier":<String_value>,
"groupsearchattribute":<String_value>,
"groupsearchsubattribute":<String_value>,
"groupsearchfilter":<String_value>,
"passwdchange":<String_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"attributes":<String_value>,
"otpsecret":<String_value>,
"sshpublickey":<String_value>,
"pushservice":<String_value>,
"email":<String_value>,
"kbattribute":<String_value>,
"alternateemailattr":<String_value>
}]}
<!--NeedCopy-->
count
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationldapaction?count=yes
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:
{ "authenticationldapaction": [ { "__count": "#no"} ] }
<!--NeedCopy-->
Share
Share
In this article
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.