Citrix ADC 12.1 NITRO API Reference

gslbservicegroup_gslbservicegroupmember_binding

Binding object showing the gslbservicegroupmember that can be bound to gslbservicegroup.

Properties

(click to see Operations)

Name Data Type Permissions Description
state Read-write Initial state of the GSLB service group.
Default value: ENABLED
Possible values = ENABLED, DISABLED
publicport Read-write The public port associated with the GSLB service’s public IP address. The port is mapped to the service’s private port number. Applicable to the local GSLB service. Optional.
Minimum value = 1
weight Read-write Weight to assign to the servers in the service group. Specifies the capacity of the servers relative to the other servers in the load balancing configuration. The higher the weight, the higher the percentage of requests sent to the service.
Minimum value = 1
Maximum value = 100
port Read-write Server port number.
Range 1 - 65535
* in CLI is represented as 65535 in NITRO API
servername Read-write Name of the server to which to bind the service group.
Minimum length = 1
siteprefix Read-write The site’s prefix string. When the GSLB service group is bound to a GSLB virtual server, a GSLB site domain is generated internally for each bound serviceitem-domain pair by concatenating the site prefix of the service item and the name of the domain. If the special string NONE is specified, the site-prefix string is unset. When implementing HTTP redirect site persistence, the Citrix ADC redirects GSLB requests to GSLB services by using their site domains.
ip Read-write IP Address.
servicegroupname Read-write Name of the GSLB service group.
Minimum length = 1
hashid Read-write The hash identifier for the service. This must be unique for each service. This parameter is used by hash based load balancing methods.
Minimum value = 1
publicip Read-write The public IP address that a NAT device translates to the GSLB service’s private IP address. Optional.
Minimum length = 1
threshold Read-only .
Possible values = ABOVE, BELOW
delay Read-only The time allowed (in seconds) for a graceful shutdown. During this period, new connections or requests will continue to be sent to this service for clients who already have a persistent session on the system. Connections or requests from fresh or new clients who do not yet have a persistence sessions on the system will not be sent to the service. Instead, they will be load balanced among other available services. After the delay time expires, no new requests or connections will be sent to the service.
statechangetimesec Read-only Time when last state change occurred. Seconds part.
preferredlocation Read-only Prefered location.
svrstate Read-only The state of the GSLB service.
Possible values = UP, DOWN, UNKNOWN, BUSY, OUT OF SERVICE, GOING OUT OF SERVICE, DOWN WHEN GOING OUT OF SERVICE, NS_EMPTY_STR, Unknown, DISABLED
gslbthreshold Read-only Indicates if gslb svc has reached threshold.
tickssincelaststatechange Read-only Time in 10 millisecond ticks since the last state change.
graceful Read-only Wait for all existing connections to the service to terminate before shutting down the service.
Default value: NO
Possible values = YES, NO
__count Read-only count parameter

Operations

(click to see Properties)

ADD: DELETE: GET GET (ALL) COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

*Note:*

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)/nitro/v1/config/gslbservicegroup_gslbservicegroupmember_binding

HTTP Method:PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{
"gslbservicegroup_gslbservicegroupmember_binding":{
<b>"servicegroupname":<String_value>,
</b>"ip":<String_value>,
"servername":<String_value>,
"port":<Integer_value>,
"weight":<Double_value>,
"state":<String_value>,
"hashid":<Double_value>,
"publicip":<String_value>,
"publicport":<Integer_value>,
"siteprefix":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

delete

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup_gslbservicegroupmember_binding/servicegroupname_value<String>

Query-parameters:

args

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup_gslbservicegroupmember_binding/servicegroupname_value<String>?args=ip:<String_value>,servername:<String_value>,port:<Integer_value>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup_gslbservicegroupmember_binding/servicegroupname_value<String>

Query-parameters:

filter

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup_gslbservicegroupmember_binding/servicegroupname_value<String>?filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of gslbservicegroup_gslbservicegroupmember_binding resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.

pagination

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup_gslbservicegroupmember_binding/servicegroupname_value<String>?pagesize=#no;pageno=#no

Use this query-parameter to get the gslbservicegroup_gslbservicegroupmember_binding resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "gslbservicegroup_gslbservicegroupmember_binding": [ {
"state":<String_value>,
"publicport":<Integer_value>,
"weight":<Double_value>,
"port":<Integer_value>,
"servername":<String_value>,
"siteprefix":<String_value>,
"ip":<String_value>,
"servicegroupname":<String_value>,
"hashid":<Double_value>,
"publicip":<String_value>,
"threshold":<String_value>,
"delay":<Double_value>,
"statechangetimesec":<String_value>,
"preferredlocation":<String_value>,
"svrstate":<String_value>,
"gslbthreshold":<Integer_value>,
"tickssincelaststatechange":<Double_value>,
"graceful":<String_value>
}]}

<!--NeedCopy-->

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup_gslbservicegroupmember_binding

Query-parameters:

bulkbindings

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup_gslbservicegroupmember_binding?bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "gslbservicegroup_gslbservicegroupmember_binding": [ {
"state":<String_value>,
"publicport":<Integer_value>,
"weight":<Double_value>,
"port":<Integer_value>,
"servername":<String_value>,
"siteprefix":<String_value>,
"ip":<String_value>,
"servicegroupname":<String_value>,
"hashid":<Double_value>,
"publicip":<String_value>,
"threshold":<String_value>,
"delay":<Double_value>,
"statechangetimesec":<String_value>,
"preferredlocation":<String_value>,
"svrstate":<String_value>,
"gslbthreshold":<Integer_value>,
"tickssincelaststatechange":<Double_value>,
"graceful":<String_value>
}]}

<!--NeedCopy-->

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup_gslbservicegroupmember_binding/servicegroupname_value<String>?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{"gslbservicegroup_gslbservicegroupmember_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
gslbservicegroup_gslbservicegroupmember_binding