Citrix ADC 12.1 NITRO API Reference

mapbmr

Configuration for MAP-T Basic Mapping rule resource.

Properties

(click to see Operations)

Name Data Type Permissions Description
name Read-write Name for the Basic Mapping Rule. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Basic Mapping Rule is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “add network MapBmr bmr1 -natprefix 2005::/64 -EAbitLength 16 -psidoffset 6 -portsharingratio 8” ).
The Basic Mapping Rule information allows a MAP BR to determine source IPv4 address from the IPv6 packet sent from MAP CE device.
Also it allows to determine destination IPv6 address of MAP CE before sending packets to MAP CE.
Minimum length = 1
Maximum length = 127
ruleipv6prefix Read-write IPv6 prefix of Customer Edge(CE) device.MAP-T CE will send ipv6 packets with this ipv6 prefix as source ipv6 address prefix.
psidoffset Read-write Start bit position of Port Set Identifier(PSID) value in Embedded Address (EA) bits.
Default value: 6
Minimum value = 1
Maximum value = 15
eabitlength Read-write The Embedded Address (EA) bit field encodes the CE-specific IPv4 address and port information. The EA bit field, which is unique for a
given Rule IPv6 prefix.
Default value: 16
Minimum value = 2
Maximum value = 47
psidlength Read-write Length of Port Set IdentifierPort Set Identifier(PSID) in Embedded Address (EA) bits.
Default value: 8
Minimum value = 1
Maximum value = 16
__count Read-only count parameter

Operations

(click to see Properties)

ADD DELETE GET (ALL) GET COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

*Note:*

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapbmr

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{"mapbmr":{
<b>"name":<String_value>,
</b><b>"ruleipv6prefix":<String_value>,
</b>"psidoffset":<Double_value>,
"eabitlength":<Double_value>,
"psidlength":<Double_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

delete

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapbmr/name_value<String>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapbmr

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapbmr?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapbmr?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of mapbmr resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapbmr?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapbmr?pagesize=#no;pageno=#no

Use this query-parameter to get the mapbmr resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "mapbmr": [ {
"name":<String_value>,
"ruleipv6prefix":<String_value>,
"eabitlength":<Double_value>,
"psidoffset":<Double_value>,
"psidlength":<Double_value>
}]}

<!--NeedCopy-->

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapbmr/name_value<String>

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapbmr/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapbmr/name_value<String>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "mapbmr": [ {
"name":<String_value>,
"ruleipv6prefix":<String_value>,
"eabitlength":<Double_value>,
"psidoffset":<Double_value>,
"psidlength":<Double_value>
}]}

<!--NeedCopy-->

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/mapbmr?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "mapbmr": [ { "__count": "#no"} ] }

<!--NeedCopy-->
mapbmr