Citrix ADC 12.1 NITRO API Reference

vlan_linkset_binding

Binding object showing the linkset that can be bound to vlan.

Properties

(click to see Operations)

Name Data Type Permissions Description
ownergroup Read-write The owner node group in a Cluster for this vlan.
Default value: DEFAULT_NG
Minimum length = 1
id Read-write Specifies the virtual LAN ID.
Minimum value = 1
Maximum value = 4094
ifnum Read-write The interface to be bound to the VLAN, specified in slot/port notation (for example, 1/3).
Minimum length = 1
tagged Read-write Make the interface an 802.1q tagged interface. Packets sent on this interface on this VLAN have an additional 4-byte 802.1q tag, which identifies the VLAN. To use 802.1q tagging, you must also configure the switch connected to the appliance’s interfaces.
__count Read-write count parameter

Operations

(click to see Properties)

ADD: DELETE: GET GET (ALL) COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

*Note:*

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)/nitro/v1/config/vlan_linkset_binding

HTTP Method:PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:


{
"vlan_linkset_binding":{
<b>"id":<Double_value>,
</b>"ifnum":<String_value>,
"tagged":<Boolean_value>,
"ownergroup":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

delete

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vlan_linkset_binding/id_value<Double>

Query-parameters:

args

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vlan_linkset_binding/id_value<Double>?args=ifnum:<String_value>,tagged:<Boolean_value>,ownergroup:<String_value>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vlan_linkset_binding/id_value<Double>

Query-parameters:

filter

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vlan_linkset_binding/id_value<Double>?filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of vlan_linkset_binding resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.

pagination

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vlan_linkset_binding/id_value<Double>?pagesize=#no;pageno=#no

Use this query-parameter to get the vlan_linkset_binding resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "vlan_linkset_binding": [ {
"ownergroup":<String_value>,
"id":<Double_value>,
"ifnum":<String_value>,
"tagged":<Boolean_value>
}]}

<!--NeedCopy-->

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vlan_linkset_binding

Query-parameters:

bulkbindings

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vlan_linkset_binding?bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{ "vlan_linkset_binding": [ {
"ownergroup":<String_value>,
"id":<Double_value>,
"ifnum":<String_value>,
"tagged":<Boolean_value>
}]}

<!--NeedCopy-->

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/vlan_linkset_binding/id_value<Double>?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:


{"vlan_linkset_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
vlan_linkset_binding