NetScaler SDX 13.1 NITRO API Reference

filter_scheduler

Configuration for Filter Scheduler resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
details <filter_schedule_details[]> Read-write Filter Schedule Details.
recurrence_type Read-write Type of recurrence of schedule for the filter : daily/weekly/specific day.

Maximum length = 255
tz_offset Read-write Time zone offset..
filter_job_name Read-write Filter Job Name.

Maximum length = 255
recurrenceOptions Read-write Comma separated recurrence options of job that is scheduled.
id Read-write Id is system generated key for all the events.
filter_status Read-write filter status - enabled, disabled, pause.

Maximum length = 255
activity_log Read-only Activity description.
activity_status Read-only Activity Status.

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET (ALL)
  • GET
  • UPDATE

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

The following parameters can be used in the nitro request : onerror <String_value>

Use this parameter to set the onerror status for nitro request. Applicable only for bulk requests.

Default value: EXIT

Possible values = EXIT, CONTINUE

add

URL: https://<MGMT-IP>/nitro/v2/config/filter_scheduler?onerror=<String_value> HTTPS Method: POST

Request Headers: Content-Type: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Request Payload:

{"filter_scheduler": {
"filter_job_name":<String_value>,
"id":<String_value>,
"details":[{
"scheduleStartTimesEpoch":<String_value>,
"scheduleEndTimesEpoch":<String_value>,
"parent_id":<String_value>,
"id":<String_value>,
"endRecurrenceTimes":<String_value>,
"parent_name":<String_value>,
"startRecurrenceTimes":<String_value>}],
"tz_offset":<Integer_value>,
"recurrenceOptions":<String_value>,
"filter_status":<String_value>,
"recurrence_type":<String_value>}}

<!--NeedCopy-->

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "filter_scheduler":[{
"details":[{
"scheduleEndTimesEpoch":<String_value>,
"scheduleStartTimesEpoch":<String_value>,
"parent_name":<String_value>,
"endRecurrenceTimes":<String_value>,
"id":<String_value>,
"startRecurrenceTimes":<String_value>,
"parent_id":<String_value>}],
"recurrence_type":<String_value>,
"tz_offset":<Integer_value>,
"activity_log":<String_value>,
"filter_job_name":<String_value>,
"recurrenceOptions":<String_value>,
"activity_status":<String_value>,
"id":<String_value>,
"filter_status":<String_value>}]}

<!--NeedCopy-->

delete

URL: https://<MGMT-IP>/nitro/v2/config/filter_scheduler/id_value<String> HTTPS Method: DELETE

Request Headers: X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt }

<!--NeedCopy-->

get (all)

URL: https://<MGMT-IP>/nitro/v2/config/filter_scheduler Query-parameters:

filter https://<MGMT-IP>/nitro/v2/config/filter_scheduler ?filter=property-name1:property-value1,property-name2:property-value2 Use this query-parameter to get the filtered set of filter_scheduler resources configured on the system. You can set a filter on any property of the resource.

pagesize=#no;pageno=#no https://<MGMT-IP>/nitro/v2/config/filter_scheduler ?pagesize=#no;pageno=#no Use this query-parameter to get the filter_scheduler resources in chunks.

count https://<MGMT-IP>/nitro/v2/config/filter_scheduler ?count=yes Use this query-parameter to get the count of filter_scheduler resources.

HTTPS Method: GET

Request Headers: Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "filter_scheduler":[{
"details":[{
"scheduleEndTimesEpoch":<String_value>,
"scheduleStartTimesEpoch":<String_value>,
"parent_name":<String_value>,
"endRecurrenceTimes":<String_value>,
"id":<String_value>,
"startRecurrenceTimes":<String_value>,
"parent_id":<String_value>}],
"recurrence_type":<String_value>,
"tz_offset":<Integer_value>,
"activity_log":<String_value>,
"filter_job_name":<String_value>,
"recurrenceOptions":<String_value>,
"activity_status":<String_value>,
"id":<String_value>,
"filter_status":<String_value>}]}

<!--NeedCopy-->

get

URL: https://<MGMT-IP>/nitro/v2/config/filter_scheduler/id_value<String> HTTPS Method: GET

Request Headers: Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "filter_scheduler":[{
"details":[{
"scheduleEndTimesEpoch":<String_value>,
"scheduleStartTimesEpoch":<String_value>,
"parent_name":<String_value>,
"endRecurrenceTimes":<String_value>,
"id":<String_value>,
"startRecurrenceTimes":<String_value>,
"parent_id":<String_value>}],
"recurrence_type":<String_value>,
"tz_offset":<Integer_value>,
"activity_log":<String_value>,
"filter_job_name":<String_value>,
"recurrenceOptions":<String_value>,
"activity_status":<String_value>,
"id":<String_value>,
"filter_status":<String_value>}]}

<!--NeedCopy-->

update

URL: https://<MGMT-IP>/nitro/v2/config/filter_scheduler/id_value<String> HTTPS Method: PUT

Request Headers: Content-Type: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Request Payload:

{"filter_scheduler":{
<b>"id":<String_value></b>,
"filter_job_name":<String_value>,
"details":[{
"scheduleStartTimesEpoch":<String_value>,
"scheduleEndTimesEpoch":<String_value>,
"parent_id":<String_value>,
"id":<String_value>,
"endRecurrenceTimes":<String_value>,
"parent_name":<String_value>,
"startRecurrenceTimes":<String_value>}],
"tz_offset":<Integer_value>,
"recurrenceOptions":<String_value>,
"filter_status":<String_value>,
"recurrence_type":<String_value>}}

<!--NeedCopy-->

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "filter_scheduler":[{
"details":[{
"scheduleEndTimesEpoch":<String_value>,
"scheduleStartTimesEpoch":<String_value>,
"parent_name":<String_value>,
"endRecurrenceTimes":<String_value>,
"id":<String_value>,
"startRecurrenceTimes":<String_value>,
"parent_id":<String_value>}],
"recurrence_type":<String_value>,
"tz_offset":<Integer_value>,
"activity_log":<String_value>,
"filter_job_name":<String_value>,
"recurrenceOptions":<String_value>,
"activity_status":<String_value>,
"id":<String_value>,
"filter_status":<String_value>}]}

<!--NeedCopy-->
filter_scheduler