ADC 14.1 Syslog Message Reference

Feature Message Description Category Format        
TCP CONN_DELINK INFO When a server side and a client side TCP connection is delinked.These are the connections which are being tracked by netscaler like HTTP “Source%s:%d-Vserver%s:%d-NatIP%s:%d-““Destination%s:%d-DelinkTime%s-Total_bytes_send%llu-““Total_bytes_recv%llu”        
TCP CONN_TERMINATE INFO When a TCP connection terminates.The logged data indicates the number of bytes transmitted and received over the connection and lso the connection start and end time “Source%s:%d-Destination%s:%d-““StartTime%s-EndTime%s-Total_bytes_send%llu-““Total_bytes_recv%llu”        
TCP OTHERCONN_DELINK INFO When a server side and a client side TCP connection is delinked.These are the connections which are not being tracked by netscaler like FTP,telnet etc “Source%s:%d-Vserver%s:%d-NatIP%s:%d-““Destination%s:%d-DelinkTime%s”“Total_bytes_send%u-Total_bytes_recv%u”        
TCP NAT_CONN_DELINK INFO When a server side and a client side TCP connection for RNAT are delinked we need to log the connection information “Source%s:%d-Destination%s:%d-NatIP%s:%d-““Destination%s:%d-StartTime%s-DelinkTime%s-Total_bytes_send%llu-““Total_bytes_recv%llu-ClosureReason%s”        
TCP NAT_OTHERCONN_DELINK INFO When a server side and a client side TCP connection for RNAT are delinked we need to log the connection information “Source%s:%d-Destination%s:%d-NatIP%s:%d-““Destination%s:%d-StartTime%s-DelinkTime%s-Total_bytes_send%llu-““Total_bytes_recv%llu-ClosureReason%s”        
ACL ACL_PKT_LOG INFO ACL Packet Log “Source%s–>Destination%s-““ProtocolICMP-““Type%d-Code%d-““TimeStamp%d(ms)-Hitcount%d-HitRule%s-Action%s-Data”        
ACL ACL6_PKT_LOG INFO ACL6 Packet Log “Source%s–>Destination%s-““ProtocolICMP-““Type%d-Code%d-““TimeStamp%d(ms)-Hitcount%d-HitRule%s-Action%s-Data”        
LSN LSN_SESSION INFO Info of LSN session created “S%s%s C-%s:%d:%d N-%s:%d D-%s:%d:%d %s”
LSN LSN_EIM_MAPPING INFO Info of LSN Endpoint independent mapping created “EIM%s%s C-%s:%d:%d N-%s:%d %s”  
LSN LSN_ADDR_MAPPING INFO Info of LSN Address dependent mapping created “ADM%s%s C-%s:%d:%d N-%s:%d D-%s:%d %s”
LSN LSN_ADDRPORT_MAPPING INFO Info of LSN Address and Port dependent mapping created “A&PDM%s%s C-%s:%d:%d N-%s:%d D-%s:%d:%d %s”
LSN PPTP_LOG INFO Info of PPTP connection “PPTP:%sid:%dfrom:%sto:%sNatIP:%sext-id:%d\n”        
LSN LSN_PORTBLOCK INFO Info of LSN Portblock mappings “PB%s%s C-%s N-%s:%d-%d %s”  
LSN LSN_DETERMINISTIC INFO Info of LSN Portblock mappings “DTR%s%s C-%s N-%s:%d-%d”    
ALG ALG_SIP_PARSE_PACKET_EVENT ERROR Error of SIP packet parsing maxprintsize)        
ALG ALG_SDP_PARSE_PACKET_EVENT ERROR Error of SDP packet parsing “Errmsg:\“%s\”-““Group:%s-““Call_ID:%s-““Transport:%s-““Source_IP:%s-““Source_port:%u-““Destination_IP:%s-““Destination_port:%u-““Natted_IP:%s-““Natted_port:%u-““Method:%s-““Sequence_Number:%u-““Register:%s-““Content_Type:%s-““Error:\“%s\”-““Error_line:\“%s\”-““Caller_user_name:%s-““Callee_user_name:%s-““Caller_domain_name:%s-““Callee_domain_name:%s-“        
ALG ALG_SIP_ERROR_PACKET_EVENT ERROR Error of SIP protocol maxprintsize)        
ALG ALG_DHT_ERROR_PACKET_EVENT ERROR Error of SIP ALG DHT “Errmsg:\“ErrorinDHTHandlingforSIPrequest\”-““Group:%s-““Call_ID:%s-““Transport:%s-““Source_IP:%s-““Source_port:%u-““Destination_IP:%s-““Destination_port:%u-““Natted_IP:%s-““Natted_port:%u-““Method:%s-““Sequence_Number:%u-““Register:%s-““Content_Type:%s-““Caller_user_name:%s-““Callee_user_name:%s-““Caller_domain_name:%s-““Callee_domain_name:%s”        
ALG ALG_SIP_GENERATE_ERROR_PACKET_EVENT ERROR Error of SIP generate “Errmsg:\“SIPALGgenetateerror\”-““Error_Code:%u-““Group:%s”        
ALG ALG_SIP_INFO_PACKET_EVENT INFO Info of SIP packet “Infomsg:\“SIPrequest\”-““Group:%s-““Call_ID:%s-““Transport:%s-““Source_IP:%s-““Source_port:%u-““Destination_IP:%s-““Destination_port:%u-““Natted_IP:%s-““Natted_port:%u-““Method:%s-““Sequence_Number:%u-““Register:%s-““Content_Type:%s-““Caller_user_name:%s-““Callee_user_name:%s-““Caller_domain_name:%s-““Callee_domain_name:%s-“        
ALG ALG_SIP_INFO_DELETE_CALL_PACKET_EVENT INFO Info of SIP call deletion maxprintsize)        
ALG ALG_RTSP_INFO_PACKET_EVENT INFO Info of RTSP packet maxprintsize)        
ALG ALG_RTSP_INFO_DELETE_CALL_PACKET_EVENT INFO Info of RTSP call deletion “Infomsg:\“LoginfoRTSPALGcalldeletion\”-““Group:%s-““Session_ID:%s-“        
ALG ALG_RTSP_PARSE_PACKET_EVENT ERROR Error of RTSP packet parsing maxprintsize)        
ALG ALG_RTSP_ALG_PACKET_EVENT ERROR Error of RTSP ALG maxprintsize)        
ALG ALG_RTSP_DHT_PACKET_EVENT ERROR Error of RTSP DHT maxprintsize)        
DNS DNS_QUERY INFO Information of DNS queries recieved by the DNS endpoints on NetScaler “Source%s:%d-Destination%s:%d”“User:%s-Domain:%s-Category:%d”“Action:%s-Reason:%s”        
DNS DNS_RESPONSE INFO Information of DNS responses served by the DNS endpoints on NetScaler to clients “Source%s:%d-Destination%s:%d”“User:%s-Domain:%s-Category:%d”“Action:%s-Reason:%s”        
DNS DNS_ERROR INFO Information of errors encountered during DNS packet processing on NetScaler “Source%s:%d-Destination%s:%d”“User:%s-Domain:%s-Category:%d”“Action:%s-Reason:%s”        
SUBSCRIBER SESSION_EVENT INFO Subscriber Session Event Info “Session%s        
SUBSCRIBER SESSION_FAILURE ERROR Subscriber Session Failure Info “FailureReason:%s        
SSLI INTERCEPT_LOG INFO SSL Interception Success Log “Source%s:%d-Destination%s:%d”“User:%s-Domain:%s-Category:%d”“Action:%s-Reason:%s”        
SSLI BYPASS_LOG INFO SSL Interception Bypass Log “Source%s:%d-Destination%s:%d”“User:%s-Domain:%s-Category:%d”“Action:%s-Reason:%s”        
SSLI DROPPED_LOG INFO SSL Interception Dropped Log “Source%s:%d-Destination%s:%d”“User:%s-Domain:%s-Category:%d”“Action:%s-Reason:%s”        
URLFILT URLFILT_LOG INFO URL filtering Log “Source%s-Destination%s”“URL%s-““Category%s-Categorygroup%s-Reputation%d-““Policyaction%s”        
CI ICAP_LOG INFO ICAP transaction Log. “Source%s:%d-““Destination%s:%d-““Domain%s-““Content-Type%s-““ICAPServer%s:%d-““Mode%s-““Service%s-““Response%d-““Action%s”        
CI ICAPC_LOG INFO ICAP custom log. “%s”        
CI INLINE_INSPECTION_LOG INFO Inline Inspection transaction Log. “ID%lld-““Source%s:%d-““Destination%s:%d-““Protocol%s-““URL%s-““Domain%s-““Service%s-““%s%s-““Action%s-““BytesSent%lld-““BytesReceived%lld-““OriginServer%s:%d”        
CI TRAFFIC_MIRROR_LOG INFO Traffic Mirror transaction Log. “ID%lld-““Source%s:%d-““Destination%s:%d-““Protocol%s-““URL%s-““Domain%s-““Service%s-““%s%s-““Action%s-““RequestBytesSent%lld-““ResponseBytesSent%lld-““OriginServer%s:%d”        
AAA LOGIN_FAILED WARNING When the aaa module failed to login the user.The reason for failure is indicated in the message “User%s-Client_ip%s-Failure_reason\“%s\“-Browser%s”        
AAA EXTRACTED_GROUPS INFO After a user logs in the group for the user has been extracted “Extracted_groups\“%s\””        
UI CMD_EXECUTED INFO Logs the NSCLI/GUI command executed in NetScaler “User%s-ADM_User%s-Remote_ip%s-Command\“%s\”-““Status\“%s\””        
SSLVPN LOGIN INFO SSLVPN login succeeds “User%s-Client_ip%s-““Nat_ip%s-Vserver%s:%d-Browser_type\“%s\“-SSLVPN_client_type%s-Group(s)\“%s\””        
SSLVPN LOGOUT INFO SSLVPN session logs out.Logout method is captured in the message “User%s-““Client_ip%s-Nat_ip%s-““Vserver%s:%d-““Start_time\“%s\“-End_time\“%s\“-Duration%s-““Http_resources_accessed%s-NonHttp_services_accessed%s-““Total_TCP_connections%d-Total_UDP_flows%d-““Total_policies_allowed%d-Total_policies_denied%d-““Total_bytes_send%s-Total_bytes_recv%s-““Total_compressedbytes_send%s-Total_compressedbytes_recv%s-““Compression_ratio_send%d.%02u%%-““Compression_ratio_recv%d.%02u%%-““LogoutMethod\“%s\“-Group(s)\“%s\””        
SSLVPN ICASTART INFO ICA application launch has started “[TECHSUPPORT][LAUNCH][%s][%s][ICAUUID=%s]”“Source%s:%d-Destination%s:%d-““SSLRelayAddress%s:%d-““customername%s-““username:domainname%s-““applicationName%s-startTime\“%s\”-““connectionId%x”        
SSLVPN ICAEND_CONNSTAT INFO ICA application has terminated “[TECHSUPPORT][LAUNCH][%s][%s][ICAUUID=%s]”“Source%s:%d-Destination%s:%d-““SSLRelayAddress%s:%d-““customername%s-““username:domainname%s-““startTime\“%s\“-endTime\“%s\”-““Duration%s-Total_bytes_send%u-Total_bytes_recv%u-““Total_compressedbytes_send%u-Total_compressedbytes_recv%u-““Compression_ratio_send%d.%02u%%-Compression_ratio_recv%d.%02u%%-““connectionId%x”        
SSLVPN TCPCONNSTAT INFO Logs the TCP connection related information for a connection belonging to a SSLVPN session “User%s-Client_ip%s-Nat_ip%s-Vserver%s:%d-““Source%s:%d-Destination%s:%d-Start_time\“%s\“-End_time\“%s\”-““Duration%s-Total_bytes_send%d-Total_bytes_recv%d-““Total_compressedbytes_send%d-Total_compressedbytes_recv%d-““Compression_ratio_send%d.%02u%%-Compression_ratio_recv%d.%02u%%-Access%s-Group(s)\“%s\””        
SSLVPN TCPCONN_TIMEDOUT INFO An SSLVPN connection timed out.The information about the connection start and end time the amount of data transferred and received are present in the message date “User%s-Client_ip%s-““Nat_ip%s-Vserver%s:%d-Last_contact\“%s\“-Group(s)\“%s\””        
SSLVPN UDPFLOWSTAT INFO When a UDP flow , within a SSLVPN session, terminates “[TECHSUPPORT]User%s-Client_ip%s-““Nat_ip%s-Vserver%s:%d-Source%s:%d-““Destination%s:%d-Start_time\“%s\“-End_time\“%s\”-““Duration%s-Total_bytes_send%d-““Total_bytes_recv%d-Access%s-Group(s)\“%s\””        
SSLVPN HTTPREQUEST INFO A SSLVPN session receives a HTTP request “[TECHSUPPORT][ENUMERATION]%sUser%s:Group(s)%s:Vserver%s:%d-%s:”“Message=SSOis%s:%s%s%s”        
SSLVPN NONHTTP_RESOURCEACCESS_DENIED NOTICE A non-http resource access is denied by policy engine. The denied policy name is captured in the log message. “-Denied_by_policy\“%s\””        
SSLVPN HTTP_RESOURCEACCESS_DENIED NOTICE A http resource access is denied by policy engine. The denied policy name is captured in the log message. “-Denied_by_policy\“%s\””        
SSLVPN LICLMT_REACHED INFO SSLVPN license limit reached “Vserver%s:%d-License_limit%d”        
SSLVPN CLISEC_CHECK ERROR Logs with severity ERROR when client security check for a SSLVPN session fails, otherwise logs with severity DEBUG “%s:%s-ClientIP%s-Vserver%s:%d-Client_security_expression\“%s\”-“        
SSLVPN CLISEC_EXP_EVAL ERROR Logs with severity ERROR when client security expression evaluates to False, otherwise logs with severity DEBUG “User%s:-ClientIP%s-Vserver%s:%d-““Clientsecuritycheck%s%s(%d)ontheclientmachine”        
SSLVPN STA_VALIDATE_RESP INFO After a user logs into SSLVPN and the group for the user has been extracted “Xdatalen%d-Xdata%s”        
SSLVPN REMOVE_SESSION_DEBUG DEBUG Gives debug information of session before removing session intentionally “Sessionid%u-““User%s-““Client_ip%s-Nat_ip%s-““Vserver_ip%s-““Errmsg\“%s\””        
EVENT ALERTSTARTED ALERT When SNMP module starts an alarm (usually when the value of a monitored attribute crosses the threshold value “%s”        
EVENT ALERTENDED ALERT When SNMP module stops an alarm (usually when the value of a monitored attribute returns to normal state) “%s”        
EVENT STARTSYS INFO When NetScaler starts “%s”        
EVENT STARTCPU INFO When a particular CPU starts “%s”        
EVENT DEVICEDOWN NOTICE Whenever a device is down “%s”        
EVENT DEVICEOFS NOTICE Whenever a device is out of service “%s”        
EVENT DEVICEUP NOTICE Whenever a device is up “%s”        
EVENT NICSTART NOTICE When the network interface is started “%s”        
EVENT NICSTOP NOTICE When the network interface is stopped “%s”        
EVENT NICHANG NOTICE When the network interface is in hung state “%s”        
EVENT NICRESET NOTICE When the network interface is reset “%s”        
EVENT NICMIGRATE NOTICE When an interface is bound or unbound from a channel “%s”        
EVENT STOPSYS INFO When the NetScaler system is stopped “%s”        
EVENT FREEBADMEM EMERGENCY When bad memory is freed (internal error) “%s”        
EVENT FREEDUPMEM EMERGENCY When duplicate memory free occurs (internal error) “%s”        
EVENT FREEEXTMEM EMERGENCY When memory is freed from a wrong pool (internal error) “%s”        
EVENT PROPSUCCESS INFO When HA propagation is successful “%s”        
EVENT PROPFAIL ALERT When HA propagation fails “%s”        
EVENT STATECHANGE 0 HA State has changed.The string along with the message gives more information “%s”        
EVENT CLSTATECHANGE 0 Cluster State has changed.The string along with the message gives more information “%s”        
EVENT CACHESTARTFLUSH INFO When cache flush starts “%s”        
EVENT CACHESTOPFLUSH INFO When cache flush is complete “%s”        
EVENT MONITORTH INFO The monitor bound to the service has hit threshold limit “%s”        
EVENT MONITORDOWN INFO The monitor bound to the service is down. “%s”        
EVENT MONITORUP INFO The monitor bound to the service is up. “%s”        
EVENT ROUTEDOWN INFO When the route is down “%s”        
EVENT ROUTEUP INFO When the route is up “%s”        
EVENT VRID6DOWN INFO When the vrid changes state to backup “%s”        
EVENT VRIDDOWN INFO When the vrid changes state to backup “%s”        
EVENT VRIDUP INFO When the vrid changes state to master “%s”        
EVENT VRIDINIT INFO When the vrid changes state to init “%s”        
EVENT VIPRHIUP INFO When the rhi state of vip changes to up “%s”        
EVENT VIPRHIDOWN INFO When the rhi state of vip changes to down “%s”        
EVENT STARTSAVECONFIG INFO When save configuration started “%s”        
EVENT STOPSAVECONFIG INFO When save configuration has stopped “%s”        
EVENT CONFIGSTART INFO When NetScaler starts to read the configuration from ns.conf file (during boot-up) “%s”        
EVENT CONFIGEND INFO When NetScaler has completed reading the configuration from ns.conf file (during boot-up) “%s”        
EVENT NICLACPSC NOTICE   “%s”        
EVENT NICLOW_THROUGHPUT NOTICE When an interface’s throughput is less than the min required “%s”        
EVENT NICNORMAL_THROUGHPUT NOTICE When an interface’s throughput is equal or greater than the min required “%s”        
EVENT NICPOWERON NOTICE When an interface is powered on “%s”        
EVENT NICPOWEROFF NOTICE When an interface is powered off “%s”        
EVENT DHCPSVRERR INFO When the DHCP server sends an invalid setting “%s”        
EVENT DHCPCAQUIRE INFO When the DHCP client aquires a lease “%s”        
EVENT DHCPCRELEASE INFO When the DHCP client releases a lease “%s”        
EVENT DHCPCDEPENDPBR INFO When the DHCP lease is released and a PBR is dependent on the lease ip “%s”        
EVENT ROUTE6DOWN INFO When the route6 is down “%s”        
EVENT ROUTE6UP INFO When the route6 is up “%s”        
EVENT MEPDOWN NOTICE Mep is down. “%s”        
EVENT MEPUP NOTICE Mep is up. “%s”        
EVENT BACKUPMEPDOWN NOTICE Backup Mep is down. “%s”        
EVENT BACKUPMEPUP NOTICE Backup Mep is up. “%s”        
EVENT NWMEPDOWN NOTICE Network metric Mep is down. “%s”        
EVENT NWMEPUP NOTICE Network metric Mep is up. “%s”        
EVENT BACKUPMEP6DOWN NOTICE Backup ipv6 Mep is down. “%s”        
EVENT BACKUPMEP6UP NOTICE Backup ipv6 Mep is up. “%s”        
EVENT UNKNOWN DEBUG   “%s”        
SSLLOG SSL_HANDSHAKE_FAILURE DEBUG SSL HandShake Failure “BackendSPCBId%d-ServerIP%s-ServerPort%d-““ProtocolVersion%s-CipherSuite\“%s\”-““Session%s”        
SSLLOG SSL_HANDSHAKE_SUCCESS DEBUG SSL HandShake Success “BackendSPCBId%d-ServerIP%s-ServerPort%d-““ProtocolVersion%s-CipherSuite\“%s\”-““Session%s”        
SSLLOG SSL_CERT_EXPIRY_IMMINENT NOTICE SSL Certificate Expiry Imminent “CertificateKeyPair%s-DaysToExpire%u”        
SSLLOG SSL_HANDSHAKE_ISSUERNAME DEBUG SSL Client Certificate IssueName “SPCBId%d-IssuerName\“%s\””        
SSLLOG SSL_HANDSHAKE_SUBJECTNAME DEBUG SSL Client Certificate SubjectName “SPCBId%d-SubjectName\“%s\””        
SSLLOG SSL_CRL_UPDATE_SUCCESS NOTICE SSL CRL Update Success “crl_name%s-server_ip%s-server_port%d-““methodLDAP-ldapscope%s-“        
SSLLOG SSL_CRL_UPDATE_FAILURE NOTICE SSL CRL Update Failure “crl_name%s-server_ip%s-server_port%d-““methodLDAP-ldapscope%s-“        
SSLLOG SSL_OCSPURL_RESOLVE_SUCCESS DEBUG SSL OCSPURL Resolve Success “Domainname%sIpaddress%s”        
SSLLOG SSL_OCSPURL_RESOLVE_FAILURE DEBUG SSL OCSPURL Resolve Failure “Domainname%sIpaddress%s”        
SSLLOG SSL_OCSPRESPONSE_SUCCESS DEBUG SSL OCSPResponse Success “%02x”        
SSLLOG SSL_OCSPRESPONSE_FAILURE DEBUG SSL OCSPResponse Failure “%02x”        
SSLLOG SSL_HANDSHAKE_FAILURE_INFO INFO SSL HandShake Failure “BackendSPCBId%d-ServerIP%s-ServerPort%d-““ProtocolVersion%s-CipherSuite\“%s\”-““Session%s”        
SSLLOG SSL_HANDSHAKE_SUCCESS_INFO INFO SSL HandShake Success “BackendSPCBId%d-ServerIP%s-ServerPort%d-““ProtocolVersion%s-CipherSuite\“%s\”-““Session%s”        
SSLLOG SSL_HANDSHAKE_ISSUERNAME_INFO INFO SSL Client Certificate IssueName “SPCBId%d-IssuerName\“%s\””        
SSLLOG SSL_HANDSHAKE_SUBJECTNAME_INFO INFO SSL Client Certificate SubjectName “SPCBId%d-SubjectName\“%s\””        
APPFW APPFW_STARTURL INFO AppFw StartURL violation “DisallowIllegalURL.”);}else{        
APPFW APPFW_MULTIPLE_HEADER INFO AppFw Multiple Header violation “Multipleheadersoftype%sinrequest.”        
APPFW APPFW_XMLPAYLOAD_CONTENT_TYPE_MISMATCH INFO AppFw Infer Content-Type Payload violation “XMLMismatchedcontent-typeinHTTPheaderdetected=\“%s\”.”        
APPFW APPFW_LOGEXPRESSION INFO AppFw Log Expression details ”%.*s”        
APPFW APPFW_DENYURL INFO AppFw DenyURL violation “DisallowDenyURLforrulepattern=\“%s\”.”        
APPFW APPFW_CONTENT_TYPE INFO AppFw Content-type violation “Unknowncontent-typeheadervalue=\“%s\”.”        
APPFW APPFW_REFERER_HEADER INFO AppFw Referer header violation “parsingrefererheader’%s’failed”        
APPFW APPFW_CSRF_TAG INFO AppFw CSRF tag violation “CSRFTagvalidationfailed”);}else{        
APPFW APPFW_XSS INFO AppFw XSS violation “%s”        
APPFW APPFW_XML_XSS WARNING AppFw XSS violation in XML “%s”        
APPFW APPFW_SQL INFO AppFw SQL Injection violation “%s”        
APPFW APPFW_SQL_GRAM INFO AppFw SQL Injection violation reported by SQL Grammar “%sGrammar-basedSQLidetectedfor%s%s=\“%s\””        
APPFW APPFW_XML_SQL WARNING AppFw SQL Injection violation in XML “%s”        
APPFW APPFW_CMD INFO AppFw CMD Injection violation “%s”        
APPFW APPFW_CMD_GRAM INFO AppFw CMD Injection violation reported by CMD Grammar “%sGrammar-basedCMDidetectedfor%s%s=\“%s\””        
APPFW APPFW_COOKIE INFO AppFw Cookie Consistency violation “%s”        
APPFW APPFW_FIELDCONSISTENCY INFO AppFw Field Consistency violation “%s”        
APPFW APPFW_FILE_UPLOAD_TYPE INFO AppFw File Upload Type violation “%s”        
APPFW APPFW_BUFFEROVERFLOW_URL INFO AppFw Buffer Overflow violation in URL “URLlength(%d)isgreaterthanmaximumallowed(%d).”        
APPFW APPFW_BUFFEROVERFLOW_COOKIE INFO AppFw Buffer Overflow violation in Cookie “Cookieheaderlength(%d)isgreaterthanmaximumallowed(%d).”        
APPFW APPFW_BUFFEROVERFLOW_HDR INFO AppFw Buffer Overflow violation in HTTP Headers “Header(%s)length(%d)isgreaterthanmaximumallowed(%d).”        
APPFW APPFW_BUFFEROVERFLOW_QUERY INFO AppFw Buffer Overflow violation in Query string “Querystringlength(%d)isgreaterthanmaximumallowed(%d).”        
APPFW APPFW_BUFFEROVERFLOW_TOTAL_HDR INFO AppFw Buffer Overflow violation in total HTTP header length “TotalHTTPheaderlength(%d)isgreaterthanmaximumallowed(%d).”        
APPFW APPFW_FIELDFORMAT INFO AppFw Field Format violation “%s”        
APPFW APPFW_SAFECOMMERCE INFO AppFw Safe Commerce violation “%s”        
APPFW APPFW_SAFECOMMERCE_XFORM INFO AppFw Safe Commerce violation detected and transformed “%s”        
APPFW APPFW_SAFEOBJECT INFO AppFw Safe Object violation “%s”        
APPFW APPFW_POLICY_HIT INFO AppFw profile invoked “%s%u-PPE%u%s%s%s<%s>”        
APPFW APPFW_POLICY_HIT_BUILTIN INFO AppFw built-in profile invoked “%s”        
APPFW APPFW_MAX_UPLOADS INFO File uploads exceed the allowed number “%s”        
APPFW APPFW_SIGNATURE_MATCH INFO AppFw signature violation “%s”        
APPFW AF_BIND_TO_PROFILE INFO AppFw rule bound to HTML profile “Profile:%s        
APPFW AF_BIND_XML_TO_PROFILE INFO AppFw rule bound to XML profile “Profile:%s        
APPFW AF_ADD_FIELDTYPE INFO Add an AppFw Field Type “FieldType:%s        
APPFW AF_ADD_PROFILE INFO Add an AppFw profile “Profile:%s\n”        
APPFW AF_RM_FIELDTYPE INFO Remove an Appfw Field Type “FieldType:%s        
APPFW AF_RM_PROFILE INFO Remove an AppFw profile “Profile:%s\n”        
APPFW AF_ADD_CFFIELD INFO Add a confidential field “FieldName:%s        
APPFW AF_RM_CFFIELD INFO Remove a confidential field “FieldName:%s        
APPFW AF_400_RESP INFO AppFw Request error. Generated 400 Response “%s”        
APPFW AF_5XX_RESP INFO Server Error. Generated 5XX Response “%s”        
APPFW AF_RESPONSE_PARSE_ERR INFO Response parse error “Badresponsecacheheader’”);        
APPFW AF_MEMORY_ERR WARNING Memory allocation request for %lu bytes failed “Contentlengthistoolarge(%lluBytes).MemoryAllocationfailed.”        
APPFW AF_ORIGIN_SERVER_RESP_MISMATCH_ERR WARNING Origin server sent a response but AppFw needed something different “Partial(range)requestsenttobackendserverincorrectly”);        
APPFW AF_MALFORMED_REQ_ERR INFO Malformed request “Malformedmulti-partrequest-connectionreset”);break;        
APPFW AF_UTHREAD_STACK_ERR ERROR Appsecure uthread at 0x%x had a stack error “Uthreadstackpointeroverflowed:”);        
APPFW AF_SIGNATURE_ERR INFO Signature error “Signatureid%ucontainsnofastmatchpattern”        
APPFW AF_STREAM_MSG_ERR WARNING Stream message error “Lookupofprofilename’”);        
APPFW AF_GENERIC_ERR_WITH_URL WARNING Generic error with URL “Internalerror:additionaldatageneratedafterpartialresponsefor’”);        
APPFW APPFW_XML_ATTACHMENT_FOUND WARNING Attachment Found in the XML Message. “%s”        
APPFW APPFW_XML_ATTACHMENT_ERR_CALLBACK_NULL WARNING XML Attachment CallBack is NULL but HTTP message is MIME Attachment message. “%s”        
APPFW APPFW_XML_ATTACHMENT_ERR_INVALIDHEADER WARNING String %s is supposed to be MIME Header. But it is not according to the format of Mime Header HeaderName:HeaderValue “%s”        
APPFW APPFW_XML_ATTACHMENT_ERR_INVALID_HEADER WARNING HTTP Content type should be ‘application/xop+xml’ or ‘^(text application)/([a-zA-Z]*+xml xml)’ but we got %s. “%s”    
APPFW APPFW_XML_ATTACHMENT_ERR_BOUNDARY_MISMATCH WARNING Boundary mismatch in mime message. “%s”        
APPFW APPFW_XML_ERR_NO_ATTACHMENT_BOUNDARY WARNING The message having content-type as ‘Multipart/Related’ and not having a boundary is invalid. “%s”        
APPFW APPFW_XML_ATTACHMENT_ERR_MAX_SIZE WARNING XML Message has an Attachment with size greater than the Configured Max Attachment Size. “%s”        
APPFW APPFW_XML_ATTACHMENT_ERR_CONTENT_TYPE WARNING XML Message has an Attachment with Illegal Content-Type “%s”        
APPFW APPFW_XML_DDOS_ERR_MSG_SEND_FAIL WARNING AppFw XML DDoS Send Fail Error. “%s”        
APPFW APPFW_XML_DOS_ERR_CHAR_DATA_LENGTH WARNING Exceeds max character data length. “%s”        
APPFW APPFW_XML_DOS_ERR_DTD WARNING DTD present in the XML message. “%s”        
APPFW APPFW_XML_DOS_ERR_EXT_ENTITY WARNING External entities present in the XML message. “%s”        
APPFW APPFW_XML_DOS_ERR_MAX WARNING AppFw XML DoS Maximum Error “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_ATTRIBUTES WARNING Element ‘%s’ exceeds maximum attributes per element. “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_ATTRIBUTE_NAME_LENGTH WARNING In element ‘%s’ an attribute exceeds maximum name length. “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_ATTRIBUTE_VALUE_LENGTH WARNING In element ‘%s’ attribute ‘%s’ exceeds maximum attribute value length. “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_ELEMENTS WARNING Element ‘%s’ exceeds maximum elements per message. “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_ELEMENT_CHILDREN WARNING Parent of element ‘%s’ exceeds maximum children at element ‘%s’. “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_ELEMENT_DEPTH WARNING Element ‘%s’ exceeds maximum element depth. “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_ELEMENT_NAME_LENGTH WARNING Element ‘%s’ exceeds maximum element name length. “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_FILE_SIZE WARNING Message size exceeds max size. “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_NODES WARNING Node ‘%s’ exceeds maximum nodes per message. “%s”        
APPFW APPFW_XML_DOS_ERR_MIN_FILE_SIZE WARNING Message size less than min size. “%s”        
APPFW APPFW_XML_ERR_NOT_WELLFORMED WARNING Message is not a well-formed XML. “%s”        
APPFW APPFW_XML_DOS_ERR_PI WARNING Processing instructions present in the XML message. “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_NAMESPACES WARNING Element ‘%s’ exceeds maximum active namespaces. “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_NAMESPACEURI_LENGTH WARNING In element ‘%s’ a namespace exceeds maximum uri length. “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_ENTITY_EXPANSION_DEPTH WARNING Exceeds max entity expansion depth “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_ENTITY_EXPANSIONS WARNING Exceeds max number of entity expansions “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_SOAPARRAY_SIZE WARNING Exceeds max total SOAP array size “%s”        
APPFW APPFW_XML_DOS_ERR_MAX_SOAPARRAY_RANK WARNING Exceeds max SOAP array rank “%s”        
APPFW APPFW_XML_ERR_CUSTOM WARNING AppFw XML internal error “%s”        
APPFW APPFW_XML_ERR_DDOS_CONNECT_TO_SERVER_FAILED WARNING AppFw XML DDoS Connect to Server Failed. “%s”        
APPFW APPFW_XML_ERR_DDOS_INTERATION_SOCKET_OPEN_FAIL WARNING AppFw XML DDoS Interaction socket open Failed. “%s”        
APPFW APPFW_XML_ERR_DDOS_INVALID_CONFIG_FILE WARNING AppFw XML DDoS Invalid Config File. “%s”        
APPFW APPFW_XML_ERR_DDOS_NO_FOLDER_INSTALLATION_PATH WARNING AppFw XML DDoS No Folder Installation Path. “%s”        
APPFW APPFW_XML_ERR_DDOS_OPEN_CONFIG_FILE_FAIL WARNING AppFw XML DDoS Failure to Open Config File. “%s”        
APPFW APPFW_XML_ERR_DOS_TRIGGERED WARNING Denial of Service Error. “%s”        
APPFW APPFW_XML_ERR_ENV_NOT_SET WARNING Environment variable QTHOME not set. “%s”        
APPFW APPFW_XML_ERR_HASH_INSERT WARNING Problems inserting a namespace into the hash table. “%s”        
APPFW APPFW_XML_ERR_HASH_LOOKUP WARNING Problems getting the key of a namespace from the hash table. “%s”        
APPFW APPFW_XML_ERR_INITIALIZING_TOKENIZER WARNING Unable to initialize XML tokenizer. “%s”        
APPFW APPFW_XML_ERR_INVALID_FILE WARNING Unable to open the file. “%s”        
APPFW APPFW_XML_ERR_INVALID_STATE WARNING AppFw XML Internal State Invalid. “%s”        
APPFW APPFW_XML_ERR_INVALID_XPATH WARNING Invalid XPath. “%s”        
APPFW APPFW_XML_ERR_LOW_MEMORY WARNING AppFw XML Low memory. “%s”        
APPFW APPFW_XML_ERR_CHARDATA_LIMIT_EXCEEDED WARNING AppFw XML character data size exceeds the limit of 30MB “%s”        
APPFW APPFW_XML_ERR_MALFORMED_ADDRESS WARNING Malformed address “%s”        
APPFW APPFW_XML_ERR_NO_DIME WARNING NS-XML APPFW supports SwA and MTOM SOAP attachments, but attachment with this message is DIME. “%s”        
APPFW APPFW_XML_ERR_OPERATION_CALLBACK WARNING Problems registering callbacks for operations. “%s”        
APPFW APPFW_XML_ERR_PREFIX_LENGTH_EXCEEDED WARNING Prefix length %d exceeded, encountered length is %d. “%s”        
APPFW APPFW_XML_ERR_READ_FAILED WARNING AppFw XML Read Failure “%s”        
APPFW APPFW_XML_ERR_STREAM_POP WARNING Problems during pop of the node out of the XML stream. “%s”        
APPFW APPFW_XML_ERR_STREAM_PUSH WARNING Problems during push of the node into the XML stream. “%s”        
APPFW APPFW_XML_ERR_UNSUPPORTED_PORT WARNING Port in address %s is greater than 65535. “%s”        
APPFW APPFW_XML_ERR_UNSUPPORTED_PROTOCOL WARNING Unsupported protocol “%s”        
APPFW APPFW_XML_ERR_VALIDATION_FAILED WARNING AppFw XML Validation Failed “%s”        
APPFW APPFW_XML_PACKET_PROCESSING_ERR_CONTEXT_NULL WARNING AppFw XML Context is NULL. “%s”        
APPFW APPFW_XML_PACKET_PROCESSING_ERR_CONTEXT_STATE_NULL WARNING Context user state is NULL; internal error. “%s”        
APPFW APPFW_XML_PACKET_PROCESSING_ERR_MESSAGE_CONFIG_NULL WARNING Message config struct is NULL. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_ABSTRACT_ELEMENT WARNING Cannot instantiate abstract element “%s”        
APPFW APPFW_XML_VALIDATION_ERR_ABSTRACT_TYPE WARNING Cannot instantiate abstract type ‘%s’, for element ‘%s’. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_ADDHEADERS WARNING Additional soap header %s present in soap message. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_ATTRIBUTE_MAX_OCCURS WARNING Attribute ‘%s’ appears more than once in element ‘%s’. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_ATTRIBUTE_MIN_OCCURS WARNING Required attribute missing in element “%s”        
APPFW APPFW_XML_VALIDATION_ERR_COMPILED_WSDL WARNING Compiled WSDL file is corrupt. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_CONTENT_MODEL_VIOLATED WARNING Content model of element ‘%s’ not satisfied. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_CORRUPT_COMPILED_WSDL WARNING Compiled WSDL file is corrupt. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_CORRUPT_SCHEMA WARNING Error compiling the schema “%s”        
APPFW APPFW_XML_VALIDATION_ERR_DATATYPE_ENGINE_INIT WARNING Initialization of the datatype engine failed. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_INTERNAL WARNING Internal corruption of WSDL in-memory structure. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_INVALID_ATTRIBUTE WARNING Attribute ‘%s’ is invalid. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_INVALID_COMBINATION WARNING Invalid configuration for soap validation. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_INVALID_COMPILED_WSDL WARNING Not able to open compiled WSDL. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_INVALID_CONTENT_MODEL WARNING Element ‘%s’ has invalid content model. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_INVALID_DATATYPE WARNING Data type is invalid. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_INVALID_ELEMENT WARNING Invalid element. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_INVALID_FILE WARNING Not able to open the file. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_INVALID_TYPE_SUBSTITUTION WARNING Did not get expected type for element ‘%s’, got ‘%s’. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_LOADING WARNING Unable to load validation engine. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_MAX WARNING AppFw XML Validation Max Error. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_NOSERVICEURL WARNING Service Url is not present or NULL. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_NOT_SUPPORTED WARNING Feature not supported. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_SOAP_BODY WARNING Soap Body structure check failed. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_SOAP_ENVELOPE WARNING Soap Envelope structure check failed. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_SOAP_HEADER WARNING Soap Header structure check failed. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_UNBOUNDED_PREFIX WARNING Prefix ‘%s’ is unbounded. “%s”        
APPFW APPFW_XML_VALIDATION_LOAD_ERR_CONTENTS_CANNOT_BE_NIL WARNING Element ‘%s’ cannot be nil. “%s”        
APPFW APPFW_XML_VALIDATION_LOAD_ERR_NIL_WITH_CONTENTS WARNING Element ‘%s’ is nil, cannot have contents. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_REX_STACK_OVERFLOW WARNING Level of recursion more than maximum allowed depth. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_REX_STACK_EMPTY WARNING Trying to pop from an empty stack. “%s”        
APPFW APPFW_XML_VALIDATION_ERR_SOAPBODY_EMPTY WARNING Both SOAP Body and SOAP Header are empty in the SOAP request. “%s”        
APPFW APPFW_XML_GENERIC_ERR_EMPTYBODY_REQ WARNING Request body is empty in the XML request. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_ELEMENT_INVALID_DATATYPE_VALUE WARNING Value should be of type ‘%s’. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_ELEMENT_INVALID_LOCATION WARNING Element ‘%s’ cannot appears at this location. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_FACET_MISMATCH WARNING Facet mismatch. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_FAILED WARNING AppFw XML Validator Load Failed. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_INVALID_ATTRIBUTE_VALUE WARNING Attribute ‘%s’ has invalid value ‘%s’. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_INVALID_DATATYPE WARNING Invalid schema datatype. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_INVALID_SCHEMA_NODE_TYPE WARNING Invalid schema node type. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_INVALID_VALUE_FOR_FIXED WARNING Value ‘%s’ does not match FIXED constraint ‘%s’. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_LIST_LENGTH_GT_MAX WARNING List length is greater than max allowed. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_LIST_LENGTH_INVALID WARNING List length is invalid. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_LIST_LENGTH_LT_MIN WARNING List length is lesser than min allowed. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_MAX WARNING AppFw XML Validation Maximum Load Error. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_REQUIRED_ATTRIBUTE WARNING Missing require attribute ‘%s’ in element ‘%s’. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_SCHEMA_COMPILATION WARNING Error code in the compiled Schema is being ignored. “%s”        
APPFW APPFW_XML_VALIDATOR_LOAD_ERR_WSDL_COMPILATION WARNING Error code in the compiled WSDL is being ignored. “%s”        
APPFW APPFW_XML_WSI_ERR_ACCELEMENTNAMESPACED WARNING R2735: A MESSAGE described with an rpc-literal binding MUST place the part accessor elements for parameters and return value in no namespace. Element ‘%s’ must be unqualified. “%s”        
APPFW APPFW_XML_WSI_ERR_ARRAYTYPE WARNING R2113: A MESSAGE containing serialized arrays MUST NOT include the soapenc:arrayType attribute. Element ‘%s’ must not include the soapenc:arrayType attribute. “%s”        
APPFW APPFW_XML_WSI_ERR_BAD_ENV_NAMESPACE WARNING R1015: A RECEIVER MUST generate a fault if they encounter a message whose document element has a local name of “Envelope” but a namespace name that is not “http://schemas.xmlsoap.org/soap/envelope/” or “http://www.w3.org/2003/05/soap-envelope”. We got namespace ‘%s’ in SOAP Request. “%s”        
APPFW APPFW_XML_WSI_ERR_BINDINGFAULTRESP WARNING R2740: The response envelope contained soap:Fault element(s), but they were not defined in the WSDL description. Element ‘%s’ should be defined as soap:fault in WSDL description. “%s”        
APPFW APPFW_XML_WSI_ERR_BODY_CHILD_NAMESPACE WARNING R1014: The children of the soap:Body element in a MESSAGE MUST be namespace qualified. Unqualified children of soap:Body is ‘%s’. “%s”        
APPFW APPFW_XML_WSI_ERR_BODY_ENV_NAMESPACE WARNING BP1201: The envelope does not use SOAP 1.1 or SOAP 1.2, i.e. does not have a document element named “Envelope” or a namespace value of http://schemas.xmlsoap.org/soap/envelope/ or http://www.w3.org/2003/05/soap-envelope. We got namespace ‘%s’. “%s”        
APPFW APPFW_XML_WSI_ERR_CHILDAFTERBODY WARNING R1011: A MESSAGE MUST NOT have any element children of soap:Envelope following the soap:Body element. Element ‘%s’ should not appear after ‘soap:Body’ element. “%s”        
APPFW APPFW_XML_WSI_ERR_CLAIM_MUSTUNDERSTAND WARNING R0007: A SENDER MUST NOT use the soap:mustUnderstand attribute when sending a SOAP header block containing a conformance claim. soap:mustUnderstand attribute is present on element ‘%s’. “%s”        
APPFW APPFW_XML_WSI_ERR_CTXT_NULL WARNING AppFw XML WSI Internal Context NULL “%s”        
APPFW APPFW_XML_WSI_ERR_DOCTYPEALLOWED WARNING R1008: A MESSAGE MUST NOT contain a Document Type Declaration. DOCTYPE name is ‘%s’. “%s”        
APPFW APPFW_XML_WSI_ERR_DOT_NOTATION WARNING R1031: When a MESSAGE contains a faultcode element the content of that element SHOULD NOT use of the SOAP 1.1 “dot” notation to refine the meaning of the Fault. Data ‘%s’ should not contain ‘DOT’(.) in it. “%s”        
APPFW APPFW_XML_WSI_ERR_ENCODINGSTYLE WARNING R1005: A MESSAGE MUST NOT contain soap:encodingStyle attribute on any of the elements whose namespace is the same as the namespace of the qualified document element ‘Envelope’. ‘soap:encodingStyle’ attribute should not be present on element ‘%s’. “%s”        
APPFW APPFW_XML_WSI_ERR_ENCODINGSTYLECHILD WARNING R1006: A MESSAGE MUST NOT contain soap:encodingStyle attributes on any element that is a child of soap:Body. ‘soap:encodingStyle’ attribute should not be present on immidiate child ‘%s’ of soap:Body. “%s”        
APPFW APPFW_XML_WSI_ERR_ENCODINGSTYLEGRANDCHILD WARNING R1007: A MESSAGE described in an rpc-literal binding MUST NOT contain soap:encodingStyle attribute on any elements are grandchildren of soap:Body. ‘soap:encodingStyle’ attribute should not be present on grandchild ‘%s’ of soap:Body. “%s”        
APPFW APPFW_XML_WSI_ERR_ENVELEMENTSNOATTRIBUTES WARNING R1032: The soap:Envelope, soap:Header, and soap:Body elements in an ENVELOPE MUST NOT have attributes in the same namespace as that of the qualified document element ‘Envelope’. Attribute ‘%s’ should not be in the same namespace as that of the qualified document element ‘Envelope’. “%s”        
APPFW APPFW_XML_WSI_ERR_ENVNONAMESPACE WARNING R1033: An ENVELOPE SHOULD NOT contain the namespace declaration xmlns:xml=”http://www.w3.org/XML/1998/namespace”. “%s”        
APPFW APPFW_XML_WSI_ERR_GOODRESPONSE200 WARNING R1111: An INSTANCE SHOULD use a “200 OK” HTTP status code for responses that contain a SOAP message that is not a SOAP fault. We should not get ‘soap:Fault’ element when HTTP response code is ‘200 OK’. “%s”        
APPFW APPFW_XML_WSI_ERR_HEADER_HAS_WSICLAIM WARNING R0005: A MESSAGE’s conformance claims MUST be carried as SOAP header blocks. Element ‘%s’ should be immidiate children of soap:Header. “%s”        
APPFW APPFW_XML_WSI_ERR_HTTP WARNING AppFw XML WSI HTTP Error “%s”        
APPFW APPFW_XML_WSI_ERR_ISHTTPPOST WARNING R1132: A HTTP request MESSAGE MUST use the HTTP POST method. We got ‘%s’ HTTP method. “%s”        
APPFW APPFW_XML_WSI_ERR_ISUTF8OR16 WARNING R1012: A MESSAGE MUST be serialized as either UTF-8 or UTF-16. We got encoding ‘%s’. “%s”        
APPFW APPFW_XML_WSI_ERR_MSGHASALLHEADERS WARNING R2738: A MESSAGE MUST include all soapbind:headers specified on a wsdl:input or wsdl:output of a wsdl:operation of a wsdl:binding that describes it.Wsdl header %s is not present in soap message. “%s”        
APPFW APPFW_XML_WSI_ERR_MUSTUNDERSTAND WARNING R1013: A MESSAGE containing a soap:mustUnderstand attribute MUST only use the lexical forms “0” and “1”. Value of ‘soap:mustUnderstand’ attribute is ‘%s’. “%s”        
APPFW APPFW_XML_WSI_ERR_NODEPLOYED WARNING Resource id of deployment is NULL. “%s”        
APPFW APPFW_XML_WSI_ERR_NOENVELOPEWSDLMATCH WARNING BP1701: The envelope does not conform to the SOAP schema located at ‘http://schemas.xmlsoap.org/soap/envelope/’ or ‘http://www.w3.org/2003/05/soap-envelope’. “%s”        
APPFW APPFW_XML_WSI_ERR_NONPOSTREQUEST WARNING R1114: An INSTANCE SHOULD use a “405 Method not Allowed” HTTP status code if the request method was not “POST”. We got ‘%d’ HTTP status code. “%s”        
APPFW APPFW_XML_WSI_ERR_NONXMLREQUEST WARNING R1115: An INSTANCE SHOULD use a “415 Unsupported Media Type” HTTP status code if a HTTP request message’s Content-Type header field-value is not permitted by its WSDL description. we got ‘%d’ HTTP status code. “%s”        
APPFW APPFW_XML_WSI_ERR_NOPORTURL WARNING Port URL is NULL. “%s”        
APPFW APPFW_XML_WSI_ERR_NOREQWSDLMATCH WARNING BP1011: The content of the request envelope does not match the wsdl:message definition. “%s”        
APPFW APPFW_XML_WSI_ERR_NORESPWSDLMATCH WARNING BP1013 The content of the response envelope does not match the wsdl:message definition. “%s”        
APPFW APPFW_XML_WSI_ERR_NOWSDLDEPLOYED WARNING Deployed resource is not WSDL. “%s”        
APPFW APPFW_XML_WSI_ERR_ONEWAYRESPONSE WARNING R2714: For one-way operations, an INSTANCE MUST NOT return a HTTP response that contains a SOAP envelope. Specifically, the HTTP response entity-body must be empty. we got the element soap:Envelope. “%s”        
APPFW APPFW_XML_WSI_ERR_RESPONSESTATUS200OR202 WARNING R1112: An INSTANCE SHOULD use either a “200 OK” or “202 Accepted” HTTP status code for a response that does do not contain a SOAP message but indicates successful HTTP outcome of a request. We got ‘%d’ HTTP response code. “%s”        
APPFW APPFW_XML_WSI_ERR_RESPONSEWRAPPED WARNING R2729: A MESSAGE described with an rpc-literal binding that is a response message MUST have a wrapper element whose name is the corresponding wsdl:operation name suffixed with the string “Response”. Element name should be ‘%sResponse’ but got ‘%s’. “%s”        
APPFW APPFW_XML_WSI_ERR_SOAPACTIONHEADERMATCH WARNING R2744: A HTTP request MESSAGE MUST contain a SOAPAction HTTP header field with a quoted value equal to the value of the soapAction attribute of soapbind:operation, if present in the corresponding WSDL description. Expected ‘%s’ soapAction but got ‘%s’ soapAction in HTTP header. “%s”        
APPFW APPFW_XML_WSI_ERR_SOAPACTIONQUOTED WARNING R1109: The value of the SOAPAction HTTP header field in a HTTP request MESSAGE MUST be a quoted string. We got ‘%s’ SOAPAction HTTP header. “%s”        
APPFW APPFW_XML_WSI_ERR_SOAPFAULTALLOWEDCHILD WARNING R1000: When a MESSAGE contains a soap:Fault element, that element MUST NOT have element children other than faultcode, faultstring, faultactor and detail. Element ‘%s’ is not a allowed child of ‘soap:Fault’. “%s”        
APPFW APPFW_XML_WSI_ERR_SOAPFAULTCHILDQ WARNING R1001: When a MESSAGE contains a soap:Fault element its element children MUST be unqualified. ‘soap:Fault’ child ‘%s’ should be unqualified. “%s”        
APPFW APPFW_XML_WSI_ERR_SOAPFAULTINHTTP WARNING R1126: An INSTANCE MUST use a “500 Internal Server Error” HTTP status code if the response message is a SOAP Fault. We got ‘%s’ HTTP response code. “%s”        
APPFW APPFW_XML_WSI_ERR_SOAPFAULTNONENV WARNING R1003: A RECEIVER MUST accept fault messages that have any number of qualified or unqualified attributes, including zero, appearing on the detail element. The namespace of qualified attributes can be anything other than the namespace of the qualified document element ‘Envelope’. Namespace of attribute ‘%s’ should not be the same as that of the qualified document element ‘Envelope’. “%s”        
APPFW APPFW_XML_WSI_ERR_SOAPGOODXML10 WARNING BP1601: The soap:Envelope or soap:Body does not conform to XML 1.0. Error is ‘%s’. “%s”        
APPFW APPFW_XML_WSI_ERR_STDFAULTCODE WARNING R1004: When a MESSAGE contains a faultcode element the content of that element SHOULD be one of the fault codes defined in SOAP 1.1 or a namespace qualified fault code. ‘faultcode’ ‘%s’ is not defined in SOAP 1.1 or it is not namespace qualified. “%s”        
APPFW APPFW_XML_WSI_ERR_USEHTTP10OR11 WARNING R1141: A MESSAGE MUST be sent using either HTTP/1.1 or HTTP/1.0. We got HTTP version ‘%s’. “%s”        
APPFW APPFW_XML_WSI_ERR_USEHTTP11 WARNING R1140: A MESSAGE SHOULD be sent using HTTP/1.1. We got HTTP version ‘%s’. “%s”        
APPFW APPFW_XML_WSI_ERR_WSICLAIMSWELLFORMED WARNING R0004: A MESSAGE MAY contain conformance claims, as specified in the conformance claim schema. Either ‘conformsTo’ attribute is absent or ‘soap:mustUnderstand’ attribute is present on element ‘%s’. “%s”        
APPFW APPFW_XML_WSI_ERR_WSI_LIST_NULL WARNING AppFw XML WSI List Null. “%s”        
APPFW APPFW_XML_WSI_ERR_XMLPI WARNING R1009: A MESSAGE MUST NOT contain Processing Instructions. Name of Processing Instruction is ‘%s’. “%s”        
APPFW APPFW_XML_WSI_ERR_XSINIL WARNING R2211: A MESSAGE described with an rpc-literal binding MUST NOT have the xsi:nil attribute with a value of “1” or “true” on the part accessors. Element ‘%s’ must not have the xsi:nil attribute. “%s”        
APPFW APPFW_XML_XSD_COMPILE_INIT_ERR WARNING Error during initialization “%s”        
APPFW APPFW_XML_XSD_COMPILE_LOADXSD_ERR WARNING AppFw XML XSDLOAD Failed during Compile “%s”        
APPFW APPFW_XML_XSD_COMPILE_NOMODEL_ERR WARNING No XSModel to print “%s”        
APPFW APPFW_XML_XSD_COMPILE_PARSE_ERR INFO Error during parsing “%s”        
APPFW APPFW_XML_XSD_COMPILE_UNEXPECTED_ERR WARNING Unexpected exception during parsing “%s”        
APPFW APPFW_XML_ERR_SOAP_FAULT WARNING Message contains SOAP Fault. “%s”        
APPFW APPFW_XML_SOAP_FAULT_CONTENTS WARNING Dumps the SOAP Fault contents to Audit log. “%s”        
APPFW AF_INVALID_HTTP_HEADER WARNING Error while parsing HTTP headers. “ErrorwhileparsingHTTPheaders.”);returnns_printlogmsg_appsec(buf        
APPFW APPFW_CCARD_MATCH_IN_SIGNATURES INFO Credit card violation in signatures “%s”        
APPFW APPFW_SESSIONLIMIT INFO AppFw Session Limit reached “AppfwmaximumsessionLimitreachedforPEID%d”        
APPFW AF_ADD_RFCPROFILE INFO Add an AppFw rfc profile “APPFWRFCProfile:%s\n”        
APPFW AF_RM_RFCPROFILE INFO Remove an AppFw rfc profile “APPFWRFCProfile:%s\n”        
APPFW APPFW_INV_RFC INFO RFC syntax violation. Generated 302 Response “%s”        
APPFW APPFW_NEW_SIGNATURE_ADDED INFO AppFw New Signature Added “Newsignatureavailable:RuleID=%d        
APPFW APPFW_JSON_DOS_MAX_DOCUMENT_LENGTH INFO AppFw JSON document length exceeded “%s”        
APPFW APPFW_JSON_DOS_MAX_CONTAINER_DEPTH INFO AppFw JSON document exceeds maximum container depth “%s”        
APPFW APPFW_JSON_DOS_MAX_OBJECT_KEY_COUNT INFO AppFw JSON document has object that exceeds maximum key count “%s”        
APPFW APPFW_JSON_DOS_MAX_OBJECT_KEY_LENGTH INFO AppFw JSON document has key in object that exceeds maximum key length “%s”        
APPFW APPFW_JSON_DOS_MAX_ARRAY_LENGTH INFO AppFw JSON document has array exceeds maximum array length “%s”        
APPFW APPFW_JSON_DOS_MAX_STRING_LENGTH INFO AppFw JSON document has string that exceeds maximum string length “%s”        
APPFW APPFW_JSON_SQL INFO AppFw JSON document has sql violation “%s”        
APPFW APPFW_JSON_XSS INFO AppFw JSON document has Cross-site script violation “%s”        
APPFW APPFW_DEPLOY_RELAXATION_DP INFO AppFw relaxation about to be deployed through Dynamic Learning “Learnedrulewillbeauto-deployedafter%dmins.ViolType:%s.Profile:%s        
APPFW APPFW_COOKIE_HIJACK INFO AppFw Cookie Hijacking violation “%s”        
APPFW APPFW_POSTBODYLIMIT INFO AppFw Post Body Limit violation “%s”        
APPFW APPFW_JSON_CMD INFO AppFw JSON document has command injection violation “%s”        
APPFW APPFW_JSON_SQL_GRAM INFO AppFw JSON document has SQL Injection violation reported by SQL Grammar “%s”        
APPFW APPFW_GRPC INFO AppFw gRPC detected an invalid request. “APIvalidationerror(%s)Req(%s:%s)”        
APPFW APPFW_GRPC_WEB_TEXT INFO AppFw grpc_web_text detected an invalid request. “Appsecgrpc_web_textrejectsinvalidrequest.”);returnns_printlogmsg_appsec(buf        
APPFW APPFW_GRPC_WEB_JSON INFO AppFw grpc_web_json detected an invalid request. “Appsecgrpc_web_jsonrejectsinvalidrequest.”);returnns_printlogmsg_appsec(buf        
APPFW APPFW_JSON_CMD_GRAM INFO AppFw JSON document has CMD Injection violation reported by CMD Grammar “%s”        
APPFW APPFW_BLOCK_KEYWORD INFO AppFw Block Keyword Violation “%s”        
APPFW APPFW_JSON_BLOCKKEYWORD INFO AppFw JSON Block Keyword Violation “%s”        
APPFW APPFW_BYPASS_LIST INFO AppFw Bypass List Match “%s”        
APPFW APPFW_DENY_LIST INFO AppFw Deny List Match “%s”        
APPFW APPFW_SCHEMA_ENDPOINT_NOTFOUND INFO AppFw Schema violation endpoint not found “Endpoint:(%s%s)notfoundinAPISpec:(%s)”        
APPFW APPFW_SCHEMA_METHOD_UNSUPPORTED INFO AppFw Schema violation method un-supported “HTTPmethodunsupportedasperAPISpec:(%s)forEndpoint:(%s%s)”        
APPFW APPFW_SCHEMA_PARAMETER_MISSING INFO AppFw Schema violation parameter missing “RequiredparametermissingasperAPISpec:(%s)forEndpoint:(%s%s)”        
APPFW APPFW_SCHEMA_VALUE_INCORRECT INFO AppFw Schema violation value incorrect “ParametervalueincorrectasperAPISpec:(%s)forEndpoint:(%s%s)”        
APPFW APPFW_SCHEMA_CONTENTTYPE_UNSUPPORTED INFO AppFw Schema violation content un-supported “ContenttypeunsupportedasperAPISpec:(%s)forEndpoint:(%s%s)”        
APPFW APPFW_SCHEMA_PARAMETER_INVALID INFO AppFw Schema violation parameter invalid “ParameterisinvalidasperAPISpec:(%s)forEndpoint:(%s%s)”        
APPFW APPFW_SCHEMA_OTHER INFO AppFw Schema violation other “SchemavalidationfailedasperAPISpec:(%s)forEndpoint:(%s%s)”        
APPFW APPFW_SCHEMA_RELAXATION_RULE INFO AppFw Schema Relaxation Rule Hit “RESTValidationrelaxationrule:%shitaturl:%s”        
ROUTING ZEBOS_CMD_EXECUTED INFO The ZebOS command executed. “%s”        
SNMP TRAP_SENT INFO Trap Sent Information “%s”        
SNMP TRAP_DROPPED INFO Trap Dropped information. Traps are dropped due to rate-limiting “%s”        
TRANSFORM FILE_REQUEST DEBUG URL Transformation profile invoked “Client%s-Profile%s-%sinto%s”        
TRANSFORM REQ_PARSE_ERROR WARNING URL Transformation parsing error “Client%s-Profile%s-FailedtoparserequestURL%stransformation-URL%s”        
TRANSFORM REQ_HEADER DEBUG URL Transformation in a request header “Client%s-Profile%s-Header%s-%sinto%s”        
TRANSFORM RESP_HEADER DEBUG URL Transformation in a response header “Client%s-Profile%s-Header%s-%sinto%s”        
TRANSFORM BODY_FRAG DEBUG URL Transformation in a response body “Client%s-Profile%s-Type%s-%sinto%s”        
TRANSFORM ACTION_MATCH DEBUG URL Transformation action matched URL “Client%s-Profile%s-Action%s-%sinto%s”        
TRANSFORM ACTION_MISMATCH DEBUG URL Transformation action didn’t match URL “Client%s-Profile%s-Action%s-Value%s”        
TRANSFORM PCRE_ERROR WARNING URL Transformation regex error “Client%s-Profile%s-Action%s-PCREerrorcode%d”        
TRANSFORM REQ_WRITE_ERROR WARNING URL Transformation error in a request header “Client%s-Profile%s-Failedtowrite%srequestheader”        
APPFW_RESP APPFW_XML_XSS WARNING AppFw XSS violation in XML “%s”        
APPFW_RESP APPFW_XML_SQL WARNING AppFw SQL Injection violation in XML “%s”        
APPFW_RESP APPFW_XML_ATTACHMENT_FOUND WARNING Attachment Found in the XML Message. “%s”        
APPFW_RESP APPFW_XML_ATTACHMENT_ERR_CALLBACK_NULL WARNING XML Attachment CallBack is NULL but HTTP message is MIME Attachment message. “%s”        
APPFW_RESP APPFW_XML_ATTACHMENT_ERR_INVALIDHEADER WARNING String %s is supposed to be MIME Header. But it is not according to the format of Mime Header HeaderName:HeaderValue “%s”        
APPFW_RESP APPFW_XML_ATTACHMENT_ERR_INVALID_HEADER WARNING HTTP Content type should be ‘application/xop+xml’ or ‘^(text application)/([a-zA-Z]*+xml xml)’ but we got %s. “%s”    
APPFW_RESP APPFW_XML_ATTACHMENT_ERR_BOUNDARY_MISMATCH WARNING Boundary mismatch in mime message. “%s”        
APPFW_RESP APPFW_XML_ERR_NO_ATTACHMENT_BOUNDARY WARNING The message having content-type as ‘Multipart/Related’ and not having a boundary is invalid. “%s”        
APPFW_RESP APPFW_XML_ATTACHMENT_ERR_MAX_SIZE WARNING XML Message has an Attachment with size greater than the Configured Max Attachment Size. “%s”        
APPFW_RESP APPFW_XML_ATTACHMENT_ERR_CONTENT_TYPE WARNING XML Message has an Attachment with Illegal Content-Type “%s”        
APPFW_RESP APPFW_XML_DDOS_ERR_MSG_SEND_FAIL WARNING AppFw XML DDoS Send Fail Error. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_CHAR_DATA_LENGTH WARNING Exceeds max character data length. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_DTD WARNING DTD present in the XML message. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_EXT_ENTITY WARNING External entities present in the XML message. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX WARNING AppFw XML DoS Maximum Error “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_ATTRIBUTES WARNING Element ‘%s’ exceeds maximum attributes per element. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_ATTRIBUTE_NAME_LENGTH WARNING In element ‘%s’ an attribute exceeds maximum name length. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_ATTRIBUTE_VALUE_LENGTH WARNING In element ‘%s’ attribute ‘%s’ exceeds maximum attribute value length. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_ELEMENTS WARNING Element ‘%s’ exceeds maximum elements per message. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_ELEMENT_CHILDREN WARNING Parent of element ‘%s’ exceeds maximum children at element ‘%s’. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_ELEMENT_DEPTH WARNING Element ‘%s’ exceeds maximum element depth. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_ELEMENT_NAME_LENGTH WARNING Element ‘%s’ exceeds maximum element name length. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_FILE_SIZE WARNING Message size exceeds max size. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_NODES WARNING Node ‘%s’ exceeds maximum nodes per message. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MIN_FILE_SIZE WARNING Message size less than min size. “%s”        
APPFW_RESP APPFW_XML_ERR_NOT_WELLFORMED WARNING Message is not a well-formed XML. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_PI WARNING Processing instructions present in the XML message. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_NAMESPACES WARNING Element ‘%s’ exceeds maximum active namespaces. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_NAMESPACEURI_LENGTH WARNING In element ‘%s’ a namespace exceeds maximum uri length. “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_ENTITY_EXPANSION_DEPTH WARNING Exceeds max entity expansion depth “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_ENTITY_EXPANSIONS WARNING Exceeds max number of entity expansions “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_SOAPARRAY_SIZE WARNING Exceeds max total SOAP array size “%s”        
APPFW_RESP APPFW_XML_DOS_ERR_MAX_SOAPARRAY_RANK WARNING Exceeds max SOAP array rank “%s”        
APPFW_RESP APPFW_XML_ERR_CUSTOM WARNING AppFw XML internal error “%s”        
APPFW_RESP APPFW_XML_ERR_DDOS_CONNECT_TO_SERVER_FAILED WARNING AppFw XML DDoS Connect to Server Failed. “%s”        
APPFW_RESP APPFW_XML_ERR_DDOS_INTERATION_SOCKET_OPEN_FAIL WARNING AppFw XML DDoS Interaction socket open Failed. “%s”        
APPFW_RESP APPFW_XML_ERR_DDOS_INVALID_CONFIG_FILE WARNING AppFw XML DDoS Invalid Config File. “%s”        
APPFW_RESP APPFW_XML_ERR_DDOS_NO_FOLDER_INSTALLATION_PATH WARNING AppFw XML DDoS No Folder Installation Path. “%s”        
APPFW_RESP APPFW_XML_ERR_DDOS_OPEN_CONFIG_FILE_FAIL WARNING AppFw XML DDoS Failure to Open Config File. “%s”        
APPFW_RESP APPFW_XML_ERR_DOS_TRIGGERED WARNING Denial of Service Error. “%s”        
APPFW_RESP APPFW_XML_ERR_ENV_NOT_SET WARNING Environment variable QTHOME not set. “%s”        
APPFW_RESP APPFW_XML_ERR_HASH_INSERT WARNING Problems inserting a namespace into the hash table. “%s”        
APPFW_RESP APPFW_XML_ERR_HASH_LOOKUP WARNING Problems getting the key of a namespace from the hash table. “%s”        
APPFW_RESP APPFW_XML_ERR_INITIALIZING_TOKENIZER WARNING Unable to initialize XML tokenizer. “%s”        
APPFW_RESP APPFW_XML_ERR_INVALID_FILE WARNING Unable to open the file. “%s”        
APPFW_RESP APPFW_XML_ERR_INVALID_STATE WARNING AppFw XML Internal State Invalid. “%s”        
APPFW_RESP APPFW_XML_ERR_INVALID_XPATH WARNING Invalid XPath. “%s”        
APPFW_RESP APPFW_XML_ERR_LOW_MEMORY WARNING AppFw XML Low memory. “%s”        
APPFW_RESP APPFW_XML_ERR_CHARDATA_LIMIT_EXCEEDED WARNING AppFw XML character data size exceeds the limit of 30MB “%s”        
APPFW_RESP APPFW_XML_ERR_MALFORMED_ADDRESS WARNING Malformed address “%s”        
APPFW_RESP APPFW_XML_ERR_NO_DIME WARNING NS-XML APPFW supports SwA and MTOM SOAP attachments, but attachment with this message is DIME. “%s”        
APPFW_RESP APPFW_XML_ERR_OPERATION_CALLBACK WARNING Problems registering callbacks for operations. “%s”        
APPFW_RESP APPFW_XML_ERR_PREFIX_LENGTH_EXCEEDED WARNING Prefix length %d exceeded, encountered length is %d. “%s”        
APPFW_RESP APPFW_XML_ERR_READ_FAILED WARNING AppFw XML Read Failure “%s”        
APPFW_RESP APPFW_XML_ERR_STREAM_POP WARNING Problems during pop of the node out of the XML stream. “%s”        
APPFW_RESP APPFW_XML_ERR_STREAM_PUSH WARNING Problems during push of the node into the XML stream. “%s”        
APPFW_RESP APPFW_XML_ERR_UNSUPPORTED_PORT WARNING Port in address %s is greater than 65535. “%s”        
APPFW_RESP APPFW_XML_ERR_UNSUPPORTED_PROTOCOL WARNING Unsupported protocol “%s”        
APPFW_RESP APPFW_XML_ERR_VALIDATION_FAILED WARNING AppFw XML Validation Failed “%s”        
APPFW_RESP APPFW_XML_PACKET_PROCESSING_ERR_CONTEXT_NULL WARNING AppFw XML Context is NULL. “%s”        
APPFW_RESP APPFW_XML_PACKET_PROCESSING_ERR_CONTEXT_STATE_NULL WARNING Context user state is NULL; internal error. “%s”        
APPFW_RESP APPFW_XML_PACKET_PROCESSING_ERR_MESSAGE_CONFIG_NULL WARNING Message config struct is NULL. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_ABSTRACT_ELEMENT WARNING Cannot instantiate abstract element “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_ABSTRACT_TYPE WARNING Cannot instantiate abstract type ‘%s’, for element ‘%s’. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_ADDHEADERS WARNING Additional soap header %s present in soap message. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_ATTRIBUTE_MAX_OCCURS WARNING Attribute ‘%s’ appears more than once in element ‘%s’. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_ATTRIBUTE_MIN_OCCURS WARNING Required attribute missing in element “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_COMPILED_WSDL WARNING Compiled WSDL file is corrupt. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_CONTENT_MODEL_VIOLATED WARNING Content model of element ‘%s’ not satisfied. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_CORRUPT_COMPILED_WSDL WARNING Compiled WSDL file is corrupt. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_CORRUPT_SCHEMA WARNING Error compiling the schema “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_DATATYPE_ENGINE_INIT WARNING Initialization of the datatype engine failed. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_INTERNAL WARNING Internal corruption of WSDL in-memory structure. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_INVALID_ATTRIBUTE WARNING Attribute ‘%s’ is invalid. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_INVALID_COMBINATION WARNING Invalid configuration for soap validation. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_INVALID_COMPILED_WSDL WARNING Not able to open compiled WSDL. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_INVALID_CONTENT_MODEL WARNING Element ‘%s’ has invalid content model. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_INVALID_DATATYPE WARNING Data type is invalid. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_INVALID_ELEMENT WARNING Invalid element. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_INVALID_FILE WARNING Not able to open the file. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_INVALID_TYPE_SUBSTITUTION WARNING Did not get expected type for element ‘%s’, got ‘%s’. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_LOADING WARNING Unable to load validation engine. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_MAX WARNING AppFw XML Validation Max Error. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_NOSERVICEURL WARNING Service Url is not present or NULL. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_NOT_SUPPORTED WARNING Feature not supported. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_SOAP_BODY WARNING Soap Body structure check failed. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_SOAP_ENVELOPE WARNING Soap Envelope structure check failed. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_SOAP_HEADER WARNING Soap Header structure check failed. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_UNBOUNDED_PREFIX WARNING Prefix ‘%s’ is unbounded. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_LOAD_ERR_CONTENTS_CANNOT_BE_NIL WARNING Element ‘%s’ cannot be nil. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_LOAD_ERR_NIL_WITH_CONTENTS WARNING Element ‘%s’ is nil, cannot have contents. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_REX_STACK_OVERFLOW WARNING Level of recursion more than maximum allowed depth. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_REX_STACK_EMPTY WARNING Trying to pop from an empty stack. “%s”        
APPFW_RESP APPFW_XML_VALIDATION_ERR_SOAPBODY_EMPTY WARNING Both SOAP Body and SOAP Header are empty in the SOAP request. “%s”        
APPFW_RESP APPFW_XML_GENERIC_ERR_EMPTYBODY_REQ WARNING Request body is empty in the XML request. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_ELEMENT_INVALID_DATATYPE_VALUE WARNING Value should be of type ‘%s’. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_ELEMENT_INVALID_LOCATION WARNING Element ‘%s’ cannot appears at this location. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_FACET_MISMATCH WARNING Facet mismatch. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_FAILED WARNING AppFw XML Validator Load Failed. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_INVALID_ATTRIBUTE_VALUE WARNING Attribute ‘%s’ has invalid value ‘%s’. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_INVALID_DATATYPE WARNING Invalid schema datatype. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_INVALID_SCHEMA_NODE_TYPE WARNING Invalid schema node type. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_INVALID_VALUE_FOR_FIXED WARNING Value ‘%s’ does not match FIXED constraint ‘%s’. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_LIST_LENGTH_GT_MAX WARNING List length is greater than max allowed. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_LIST_LENGTH_INVALID WARNING List length is invalid. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_LIST_LENGTH_LT_MIN WARNING List length is lesser than min allowed. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_MAX WARNING AppFw XML Validation Maximum Load Error. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_REQUIRED_ATTRIBUTE WARNING Missing require attribute ‘%s’ in element ‘%s’. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_SCHEMA_COMPILATION WARNING Error code in the compiled Schema is being ignored. “%s”        
APPFW_RESP APPFW_XML_VALIDATOR_LOAD_ERR_WSDL_COMPILATION WARNING Error code in the compiled WSDL is being ignored. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_ACCELEMENTNAMESPACED WARNING R2735: A MESSAGE described with an rpc-literal binding MUST place the part accessor elements for parameters and return value in no namespace. Element ‘%s’ must be unqualified. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_ARRAYTYPE WARNING R2113: A MESSAGE containing serialized arrays MUST NOT include the soapenc:arrayType attribute. Element ‘%s’ must not include the soapenc:arrayType attribute. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_BAD_ENV_NAMESPACE WARNING R1015: A RECEIVER MUST generate a fault if they encounter a message whose document element has a local name of “Envelope” but a namespace name that is not “http://schemas.xmlsoap.org/soap/envelope/” or “http://www.w3.org/2003/05/soap-envelope”. We got namespace ‘%s’ in SOAP Request. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_BINDINGFAULTRESP WARNING R2740: The response envelope contained soap:Fault element(s), but they were not defined in the WSDL description. Element ‘%s’ should be defined as soap:fault in WSDL description. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_BODY_CHILD_NAMESPACE WARNING R1014: The children of the soap:Body element in a MESSAGE MUST be namespace qualified. Unqualified children of soap:Body is ‘%s’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_BODY_ENV_NAMESPACE WARNING BP1201: The envelope does not use SOAP 1.1 or SOAP 1.2, i.e. does not have a document element named “Envelope” or a namespace value of http://schemas.xmlsoap.org/soap/envelope/ or http://www.w3.org/2003/05/soap-envelope. We got namespace ‘%s’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_CHILDAFTERBODY WARNING R1011: A MESSAGE MUST NOT have any element children of soap:Envelope following the soap:Body element. Element ‘%s’ should not appear after ‘soap:Body’ element. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_CLAIM_MUSTUNDERSTAND WARNING R0007: A SENDER MUST NOT use the soap:mustUnderstand attribute when sending a SOAP header block containing a conformance claim. soap:mustUnderstand attribute is present on element ‘%s’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_CTXT_NULL WARNING AppFw XML WSI Internal Context NULL “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_DOCTYPEALLOWED WARNING R1008: A MESSAGE MUST NOT contain a Document Type Declaration. DOCTYPE name is ‘%s’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_DOT_NOTATION WARNING R1031: When a MESSAGE contains a faultcode element the content of that element SHOULD NOT use of the SOAP 1.1 “dot” notation to refine the meaning of the Fault. Data ‘%s’ should not contain ‘DOT’(.) in it. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_ENCODINGSTYLE WARNING R1005: A MESSAGE MUST NOT contain soap:encodingStyle attribute on any of the elements whose namespace is the same as the namespace of the qualified document element ‘Envelope’. ‘soap:encodingStyle’ attribute should not be present on element ‘%s’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_ENCODINGSTYLECHILD WARNING R1006: A MESSAGE MUST NOT contain soap:encodingStyle attributes on any element that is a child of soap:Body. ‘soap:encodingStyle’ attribute should not be present on immidiate child ‘%s’ of soap:Body. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_ENCODINGSTYLEGRANDCHILD WARNING R1007: A MESSAGE described in an rpc-literal binding MUST NOT contain soap:encodingStyle attribute on any elements are grandchildren of soap:Body. ‘soap:encodingStyle’ attribute should not be present on grandchild ‘%s’ of soap:Body. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_ENVELEMENTSNOATTRIBUTES WARNING R1032: The soap:Envelope, soap:Header, and soap:Body elements in an ENVELOPE MUST NOT have attributes in the same namespace as that of the qualified document element ‘Envelope’. Attribute ‘%s’ should not be in the same namespace as that of the qualified document element ‘Envelope’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_ENVNONAMESPACE WARNING R1033: An ENVELOPE SHOULD NOT contain the namespace declaration xmlns:xml=”http://www.w3.org/XML/1998/namespace”. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_GOODRESPONSE200 WARNING R1111: An INSTANCE SHOULD use a “200 OK” HTTP status code for responses that contain a SOAP message that is not a SOAP fault. We should not get ‘soap:Fault’ element when HTTP response code is ‘200 OK’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_HEADER_HAS_WSICLAIM WARNING R0005: A MESSAGE’s conformance claims MUST be carried as SOAP header blocks. Element ‘%s’ should be immidiate children of soap:Header. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_HTTP WARNING AppFw XML WSI HTTP Error “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_ISHTTPPOST WARNING R1132: A HTTP request MESSAGE MUST use the HTTP POST method. We got ‘%s’ HTTP method. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_ISUTF8OR16 WARNING R1012: A MESSAGE MUST be serialized as either UTF-8 or UTF-16. We got encoding ‘%s’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_MSGHASALLHEADERS WARNING R2738: A MESSAGE MUST include all soapbind:headers specified on a wsdl:input or wsdl:output of a wsdl:operation of a wsdl:binding that describes it.Wsdl header %s is not present in soap message. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_MUSTUNDERSTAND WARNING R1013: A MESSAGE containing a soap:mustUnderstand attribute MUST only use the lexical forms “0” and “1”. Value of ‘soap:mustUnderstand’ attribute is ‘%s’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_NODEPLOYED WARNING Resource id of deployment is NULL. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_NOENVELOPEWSDLMATCH WARNING BP1701: The envelope does not conform to the SOAP schema located at ‘http://schemas.xmlsoap.org/soap/envelope/’ or ‘http://www.w3.org/2003/05/soap-envelope’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_NONPOSTREQUEST WARNING R1114: An INSTANCE SHOULD use a “405 Method not Allowed” HTTP status code if the request method was not “POST”. We got ‘%d’ HTTP status code. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_NONXMLREQUEST WARNING R1115: An INSTANCE SHOULD use a “415 Unsupported Media Type” HTTP status code if a HTTP request message’s Content-Type header field-value is not permitted by its WSDL description. we got ‘%d’ HTTP status code. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_NOPORTURL WARNING Port URL is NULL. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_NOREQWSDLMATCH WARNING BP1011: The content of the request envelope does not match the wsdl:message definition. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_NORESPWSDLMATCH WARNING BP1013 The content of the response envelope does not match the wsdl:message definition. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_NOWSDLDEPLOYED WARNING Deployed resource is not WSDL. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_ONEWAYRESPONSE WARNING R2714: For one-way operations, an INSTANCE MUST NOT return a HTTP response that contains a SOAP envelope. Specifically, the HTTP response entity-body must be empty. we got the element soap:Envelope. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_RESPONSESTATUS200OR202 WARNING R1112: An INSTANCE SHOULD use either a “200 OK” or “202 Accepted” HTTP status code for a response that does do not contain a SOAP message but indicates successful HTTP outcome of a request. We got ‘%d’ HTTP response code. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_RESPONSEWRAPPED WARNING R2729: A MESSAGE described with an rpc-literal binding that is a response message MUST have a wrapper element whose name is the corresponding wsdl:operation name suffixed with the string “Response”. Element name should be ‘%sResponse’ but got ‘%s’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_SOAPACTIONHEADERMATCH WARNING R2744: A HTTP request MESSAGE MUST contain a SOAPAction HTTP header field with a quoted value equal to the value of the soapAction attribute of soapbind:operation, if present in the corresponding WSDL description. Expected ‘%s’ soapAction but got ‘%s’ soapAction in HTTP header. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_SOAPACTIONQUOTED WARNING R1109: The value of the SOAPAction HTTP header field in a HTTP request MESSAGE MUST be a quoted string. We got ‘%s’ SOAPAction HTTP header. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_SOAPFAULTALLOWEDCHILD WARNING R1000: When a MESSAGE contains a soap:Fault element, that element MUST NOT have element children other than faultcode, faultstring, faultactor and detail. Element ‘%s’ is not a allowed child of ‘soap:Fault’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_SOAPFAULTCHILDQ WARNING R1001: When a MESSAGE contains a soap:Fault element its element children MUST be unqualified. ‘soap:Fault’ child ‘%s’ should be unqualified. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_SOAPFAULTINHTTP WARNING R1126: An INSTANCE MUST use a “500 Internal Server Error” HTTP status code if the response message is a SOAP Fault. We got ‘%s’ HTTP response code. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_SOAPFAULTNONENV WARNING R1003: A RECEIVER MUST accept fault messages that have any number of qualified or unqualified attributes, including zero, appearing on the detail element. The namespace of qualified attributes can be anything other than the namespace of the qualified document element ‘Envelope’. Namespace of attribute ‘%s’ should not be the same as that of the qualified document element ‘Envelope’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_SOAPGOODXML10 WARNING BP1601: The soap:Envelope or soap:Body does not conform to XML 1.0. Error is ‘%s’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_STDFAULTCODE WARNING R1004: When a MESSAGE contains a faultcode element the content of that element SHOULD be one of the fault codes defined in SOAP 1.1 or a namespace qualified fault code. ‘faultcode’ ‘%s’ is not defined in SOAP 1.1 or it is not namespace qualified. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_USEHTTP10OR11 WARNING R1141: A MESSAGE MUST be sent using either HTTP/1.1 or HTTP/1.0. We got HTTP version ‘%s’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_USEHTTP11 WARNING R1140: A MESSAGE SHOULD be sent using HTTP/1.1. We got HTTP version ‘%s’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_WSICLAIMSWELLFORMED WARNING R0004: A MESSAGE MAY contain conformance claims, as specified in the conformance claim schema. Either ‘conformsTo’ attribute is absent or ‘soap:mustUnderstand’ attribute is present on element ‘%s’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_WSI_LIST_NULL WARNING AppFw XML WSI List Null. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_XMLPI WARNING R1009: A MESSAGE MUST NOT contain Processing Instructions. Name of Processing Instruction is ‘%s’. “%s”        
APPFW_RESP APPFW_XML_WSI_ERR_XSINIL WARNING R2211: A MESSAGE described with an rpc-literal binding MUST NOT have the xsi:nil attribute with a value of “1” or “true” on the part accessors. Element ‘%s’ must not have the xsi:nil attribute. “%s”        
APPFW_RESP APPFW_XML_XSD_COMPILE_INIT_ERR WARNING Error during initialization “%s”        
APPFW_RESP APPFW_XML_XSD_COMPILE_LOADXSD_ERR WARNING AppFw XML XSDLOAD Failed during Compile “%s”        
APPFW_RESP APPFW_XML_XSD_COMPILE_NOMODEL_ERR WARNING No XSModel to print “%s”        
APPFW_RESP APPFW_XML_XSD_COMPILE_PARSE_ERR INFO Error during parsing “%s”        
APPFW_RESP APPFW_XML_XSD_COMPILE_UNEXPECTED_ERR WARNING Unexpected exception during parsing “%s”        
APPFW_RESP APPFW_XML_ERR_SOAP_FAULT WARNING Message contains SOAP Fault. “%s”        
APPFW_RESP APPFW_XML_SOAP_FAULT_CONTENTS WARNING Dumps the SOAP Fault contents to Audit log. “%s”        
APPFW_RESP AF_INVALID_HTTP_HEADER WARNING Error while parsing HTTP headers. “ErrorwhileparsingHTTPheaders.”);returnns_printlogmsg_appsec(buf        
APPFW_RESP APPFW_CCARD_MATCH_IN_SIGNATURES INFO Credit card violation in signatures “%s”        
AAATM LOGIN INFO Login to AAA TM vserver succeeds “User%s-Client_ip%s-““Nat_ip%s-Vserver%s:%d-Browser_type\“%s\“-Group(s)\“%s\””        
AAATM LOGOUT INFO AAA TM session logged out “User%s-““Client_ip%s-Nat_ip%s-““Vserver%s:%d-““Start_time\“%s\“-End_time\“%s\“-Duration%s-““Http_resources_accessed%s-““Total_TCP_connections%d-““Total_policies_allowed%d-Total_policies_denied%d-““Total_bytes_send%s-Total_bytes_recv%s-““Total_compressedbytes_send%s-Total_compressedbytes_recv%s-““Compression_ratio_send%d.%02u%%-““Compression_ratio_recv%d.%02u%%-““LogoutMethod\“%s\“-Group(s)\“%s\””        
AAATM HTTPREQUEST DEBUG A AAA TM session receives a HTTP request “[TECHSUPPORT][ENUMERATION]%sUser%s:Group(s)%s:Vserver%s:%d-%s:”“Message=SSOis%s:%s%s%s”        
AAATM HTTP_RESOURCEACCESS_DENIED NOTICE A http resource access is denied by policy engine. The denied policy name is captured in the log message. “-Denied_by_policy\“%s\””        
NSIP6 IPV6_DUPLICATED INFO IPv6 address got duplicated. “%s”        
ICA SESSION_SETUP DEBUG ICA session setup “[HDXINSIGHT]session_guid%s-device_serial_number%u-client_cookie:%s-““flags%llu-session_setup_time%s-client_ip%s-client_type%d-““client_launcher%d-client_version%s-client_hostname%s-““domain_name%s-server_name%s-connection_priority%u-““access_type%d-status%d-username%s”        
ICA CHANNEL_UPDATE DEBUG ICA channel update “[HDXINSIGHT]session_guid%s-device_serial_number%u-client_cookie%s-““flags%llu-channel_update_begin%s-channel_update_end%s-““channel_id_1%d-channel_id_1_val%d-channel_id_2%d-channel_id_2_val%d-““channel_id_3%d-channel_id_3_val%d-channel_id_4%d-channel_id_4_val%d-““channel_id_5%d-channel_id_5_val%d”        
ICA SESSION_UPDATE DEBUG ICA session update “[HDXINSIGHT]session_guid%s-device_serial_number%u-““client_cookie%s-flags%llu-““nsica_session_status%d-““nsica_session_client_ip%s-““nsica_session_client_port%d-““nsica_session_server_ip%s-““nsica_session_server_port%d-““nsica_session_reconnect_count%d-““nsica_session_acr_count%d-““connection_priority%u-““timestamp%s-“        
ICA L7_LATENCY_UPDATE DEBUG ICA L7 latency update “[HDXINSIGHT]session_guid%s-device_serial_number%u-““client_cookie%s-flags%llu-““nsica_status%d-““L7LatencyThresholdFactor%d-““L7LatencyWaittime%d-““L7LatencyNotifyInterval%d-““L7LatencyMaxNotifyCount%d-““L7ThresholdBreachAvgClientsideLatency%d-““L7ThresholdBreachMaxClientsideLatency%d-““L7ThresholdBreachAvgServersideLatency%d-““L7ThresholdBreachMaxServersideLatency%d-““MinL7Latency%d-“        
ICA SESSION_TERMINATE DEBUG ICA session terminate “[HDXINSIGHT]session_guid%s-device_serial_number%u-client_cookie%s-““flags%llu-session_end_time%s”        
ICA NETWORK_UPDATE DEBUG ICA network update “[HDXINSIGHT]session_guid%s-device_serial_number%u-client_cookie%s-““flags%llu-ica_rtt%u-clientside_rxbytes%u-““clientside_txbytes%u-clientside_packet_retransmits%u-““serverside_packet_retransmits%u-clientside_rtt%u-serverside_rtt%u-““clientside_jitter%u-serverside_jitter%u”        
ICA APPLICATION_LAUNCH DEBUG ICA application launch “[HDXINSIGHT]session_guid%s-device_serial_number%u-client_cookie%s-““flags%llu-startup_duration%u-launch_mechanism%u-““app_launch_time%s-app_process_id%u-““app_name%s-module_path%s”        
ICA APPLICATION_TERMINATE DEBUG ICA application terminate “[HDXINSIGHT]session_guid%s-device_serial_number%u-client_cookie%s-““flags%llu-app_termination_type%d-app_process_id%u-““app_termination_time%s”        
RDP RDP_EVENT DEBUG RDP event “UserName:%s        
RDP RDP_CONNECTION_EVENT DEBUG RDP connection event “UserName:%s        
CLI CMD_EXECUTED INFO Logs the NSCLI/GUI command executed in NetScaler “User%s-ADM_User%s-Remote_ip%s-Command\“%s\”-““Status\“%s\””        
GUI CMD_EXECUTED INFO Logs the NSCLI/GUI command executed in NetScaler “User%s-ADM_User%s-Remote_ip%s-Command\“%s\”-““Status\“%s\””        
API CMD_EXECUTED INFO Logs the NSCLI/GUI command executed in NetScaler “User%s-ADM_User%s-Remote_ip%s-Command\“%s\”-““Status\“%s\””        
CONSOLE CMD_EXECUTED INFO Logs the NSCLI/GUI command executed in NetScaler “User%s-ADM_User%s-Remote_ip%s-Command\“%s\”-““Status\“%s\””        
BOT BOT_WHITELIST INFO Bot whitelist “Allowwhitelist.URL:%.sLogMsg:%.s”        
BOT BOT_BLACKLIST INFO Bot blacklist “Disallowblacklist.URL:%.sLogMsg:%.s<%s>”        
BOT BOT_IPREP INFO Bot iprep “DisallowmaliciousIP.Category:%.sURL:%.sLogMsg:%.*s<%s>”        
BOT BOT_DEVICE_FINGERPRINT INFO Bot Device FingerPrint “DeviceFingerPrintvalidationfailed.URL:%.*s<%s>”        
BOT BOT_RATE_LIMIT INFO Bot Rate Limit “ConnectionRateLimithit.URL:%.sLogMsg:%.s<%s>”        
BOT BOT_STATIC_SIGNATURE INFO Bot static signature log. “Botsignaturematched.User-Agent:%s(%u)Type:%sURL:%.*s<%s>”        
BOT BOT_SIG_AUTO_UPDATE INFO Bot signature auto update log. “BotNewSignatureAvailable.NewlyaddedRules:%uDeletedRules:%u\n”        
BOT BOT_TRAP_URL INFO Bot Trap URL. “TrapURLSession.URL:%.*s<%s>”        
BOT BOT_CAPTCHA INFO Bot Captcha “Captchamaxattempts(%u)exceeded.URL:%.sLogMsg:%.s<%s>”        
BOT BOT_TPS INFO Bot TPS. “TPSIPlimithitforIP:%sURL:%.sLogMsg:%.s<%s>”        
BOT BOT_LOGEXPRESSION INFO Bot Log Expression. “%s%u-PPE%u%s%s%.s%.s”        
ROUTING PAL VARIABLE            
PITBOSS PITBOSS INFO Pitboss watch is added on a process with the process id pid Adding pitboss watch on (%d)        
PITBOSS PITBOSS INFO Pitboss watch is deleted on a process with the process id pid Deleting watch on (%d)        
PITBOSS PB_SYSTEM_RESTART ALERT Process with pid has reached maximum number of restarts.Therefore the systemis being restarted proc (%d) (%s) has had its maximum number of restarts (%d), rebooting the system        
PITBOSS PB_PROCESS_RESTART ALERT Process with pid is being restarted.The message indicates the number of times the process has been restarted Restarting process old pid (%d) action (%s)        
                 
ROUTING ROUTE_ADVERTISED INFO Route Advertised ROUTE (%s %s %s) - ADVERTISED        
ROUTING ROUTE_WITHDRAWN INFO Route Withdrawn ROUTE (%s %s %s) - WITHDRAWN        
ROUTING ROUTE_RELEARN   Route Relearnt RELEARN (0x%x)        
ROUTING ROUTE_HASTATE INFO HA state change HASTATE (0x%x)        
CVPN CVPN_INPUT_URL DEBUG The input URL before rewriting HTML_URL %s        
CVPN CVPN_REWRITTEN_URL DEBUG The rewritten url REWRITTEN_URL %.*s        
CVPN CVPN_PCRE_ERROR DEBUG PCRE Error Regex %.*s : PCRE_ERROR %d        
CVPN CVPN_MATCHED_URL DEBUG The matched url MATCHED_URL %.*s        
ADC 14.1 Syslog Message Reference

In this article