ns_gslbservicegroupmember_binding
Configuration for Citrix ADC GSLB Service Group Member Bindings resource.
Properties
(click to see Operations )
Name | Data Type | Permissions | Description |
---|---|---|---|
ip |
|
Read-write | Server IP. |
state |
|
Read-write | state. |
ns_ip_address |
|
Read-write | Citrix ADC IP Address.
Minimum length = 1 Maximum length = 64 |
weight |
|
Read-write | Weight. |
id |
|
Read-write | Id is system generated key. |
servicegroupname |
|
Read-write | Service Group Name. |
svrstate |
|
Read-write | Server State. |
port |
|
Read-write | Server Port. |
servername |
|
Read-write | ServerName. |
save_config |
|
Read-write | Save configuration after enable/disable. |
delay |
|
Read-write | Time, in seconds, allocated to the Citrix ADC appliance for a graceful shutdown of the service. |
svc_grp_id |
|
Read-write | Service Group ID. |
graceful |
|
Read-write | Graceful shutdown of Service.. |
hostname |
|
Read-only | Host name of the Managed device . |
display_name |
|
Read-only | Display Name. |
comment |
|
Read-only | Comment. |
partition_name |
|
Read-only | Partition Name. |
Operations
(click to see Properties )
- ENABLE
- POLL
- GET
- DISABLE
Some options that you can use for each operations:
-
Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
-
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
*Note:
*
Mandatory parameters are marked in
red
and placeholder content is marked in
green
The following parameters can be used in the nitro request : onerror <String_value>
Use this parameter to set the onerror status for nitro request. Applicable only for bulk requests.
Default value: EXIT
Possible values = EXIT, CONTINUE
enable
URL: https://<MGMT-IP>/nitro/v2/config/ns_gslbservicegroupmember_binding?action=enable;onerror=<String_value> HTTPS Method: POST
Request Headers: Content-Type: application/json
X-NITRO-USER:username_value<String>
X-NITRO-PASS:password_value<String>
or
Cookie:NITRO_AUTH_TOKEN=token_value<String>
Request Payload:
{"ns_gslbservicegroupmember_binding": {
<b>"id":<String_value></b>,
"ns_ip_address":<String_value>,
"save_config":<Boolean_value>,
"weight":<String_value>,
"servername":<String_value>,
"servicegroupname":<String_value>,
"graceful":<Boolean_value>,
"ip":<String_value>,
"delay":<Double_value>,
"state":<String_value>,
"svrstate":<String_value>,
"svc_grp_id":<String_value>,
"port":<Integer_value>}}
Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error
Response Payload:
{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "ns_gslbservicegroupmember_binding":[{
"ip":<String_value>,
"hostname":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"customserverid":<String_value>,
"weight":<String_value>,
"id":<String_value>,
"servicegroupname":<String_value>,
"svrstate":<String_value>,
"poll_time":<Integer_value>,
"port":<Integer_value>,
"display_name":<String_value>,
"serverid":<String_value>,
"servername":<String_value>,
"comment":<String_value>,
"partition_name":<String_value>,
"hash_id":<String_value>,
"save_config":<Boolean_value>,
"delay":<Double_value>,
"svc_grp_id":<String_value>,
"graceful":<Boolean_value>}]}
poll
URL: https://<MGMT-IP>/nitro/v2/config/ns_gslbservicegroupmember_binding?action=poll;onerror=<String_value> HTTPS Method: POST
Request Headers: Content-Type: application/json
X-NITRO-USER:username_value<String>
X-NITRO-PASS:password_value<String>
or
Cookie:NITRO_AUTH_TOKEN=token_value<String>
Request Payload:
{"ns_gslbservicegroupmember_binding": {
<b>"id":<String_value></b>,
"ns_ip_address":<String_value>,
"save_config":<Boolean_value>,
"weight":<String_value>,
"servername":<String_value>,
"servicegroupname":<String_value>,
"graceful":<Boolean_value>,
"ip":<String_value>,
"delay":<Double_value>,
"state":<String_value>,
"svrstate":<String_value>,
"svc_grp_id":<String_value>,
"port":<Integer_value>}}
Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error
Response Payload:
{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "ns_gslbservicegroupmember_binding":[{
"ip":<String_value>,
"hostname":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"customserverid":<String_value>,
"weight":<String_value>,
"id":<String_value>,
"servicegroupname":<String_value>,
"svrstate":<String_value>,
"poll_time":<Integer_value>,
"port":<Integer_value>,
"display_name":<String_value>,
"serverid":<String_value>,
"servername":<String_value>,
"comment":<String_value>,
"partition_name":<String_value>,
"hash_id":<String_value>,
"save_config":<Boolean_value>,
"delay":<Double_value>,
"svc_grp_id":<String_value>,
"graceful":<Boolean_value>}]}
get
URL: https://<MGMT-IP>/nitro/v2/config/ns_gslbservicegroupmember_binding HTTPS Method: GET
Request Headers: Accept: application/json
X-NITRO-USER:username_value<String>
X-NITRO-PASS:password_value<String>
or
Cookie:NITRO_AUTH_TOKEN=token_value<String>
Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error
Response Headers:
Content-Type:application/json
Response Payload:
{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "ns_gslbservicegroupmember_binding":[{
"ip":<String_value>,
"hostname":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"customserverid":<String_value>,
"weight":<String_value>,
"id":<String_value>,
"servicegroupname":<String_value>,
"svrstate":<String_value>,
"poll_time":<Integer_value>,
"port":<Integer_value>,
"display_name":<String_value>,
"serverid":<String_value>,
"servername":<String_value>,
"comment":<String_value>,
"partition_name":<String_value>,
"hash_id":<String_value>,
"save_config":<Boolean_value>,
"delay":<Double_value>,
"svc_grp_id":<String_value>,
"graceful":<Boolean_value>}]}
disable
URL: https://<MGMT-IP>/nitro/v2/config/ns_gslbservicegroupmember_binding?action=disable;onerror=<String_value> HTTPS Method: POST
Request Headers: Content-Type: application/json
X-NITRO-USER:username_value<String>
X-NITRO-PASS:password_value<String>
or
Cookie:NITRO_AUTH_TOKEN=token_value<String>
Request Payload:
{"ns_gslbservicegroupmember_binding": {
<b>"id":<String_value></b>,
"ns_ip_address":<String_value>,
"save_config":<Boolean_value>,
"weight":<String_value>,
"servername":<String_value>,
"servicegroupname":<String_value>,
"graceful":<Boolean_value>,
"ip":<String_value>,
"delay":<Double_value>,
"state":<String_value>,
"svrstate":<String_value>,
"svc_grp_id":<String_value>,
"port":<Integer_value>}}
Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error
Response Payload:
{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "ns_gslbservicegroupmember_binding":[{
"ip":<String_value>,
"hostname":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"customserverid":<String_value>,
"weight":<String_value>,
"id":<String_value>,
"servicegroupname":<String_value>,
"svrstate":<String_value>,
"poll_time":<Integer_value>,
"port":<Integer_value>,
"display_name":<String_value>,
"serverid":<String_value>,
"servername":<String_value>,
"comment":<String_value>,
"partition_name":<String_value>,
"hash_id":<String_value>,
"save_config":<Boolean_value>,
"delay":<Double_value>,
"svc_grp_id":<String_value>,
"graceful":<Boolean_value>}]}