lsn-appsattributes
The following operations can be performed on "lsn-appsattributes":
set lsn appsattributes
Set LSN Application Port ATTRIBUTES.
Synopsis
set lsn appsattributes <name> -sessiontimeout <secs>
Arguments
name Name for the LSN Application Port ATTRIBUTES. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN application profile is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn application profile1" or 'lsn application profile1').
sessiontimeout Timeout, in seconds, for an idle LSN session. If an LSN session is idle for a time that exceeds this value, the Citrix ADC removes the session.This timeout does not apply for a TCP LSN session when a FIN or RST message is received from either of the endpoints. Default value: 30 Minimum value: 5 Maximum value: 600
Example
Set lsn APPSATTRIBUTES s1 -timeout 40
add lsn appsattributes
Add LSN Application Port ATTRIBUTES.
Arguments
name Name for the LSN Application Port ATTRIBUTES. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN application profile is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn application profile1" or 'lsn application profile1').
transportprotocol Name of the protocol(TCP,UDP) for which the parameters of this LSN application port ATTRIBUTES applies
Possible values: TCP, UDP, ICMP
port This is used for Displaying Port/Port range in CLI/Nitro.Lowport, Highport values are populated and used for displaying.Port numbers or range of port numbers to match against the destination port of the incoming packet from a subscriber. When the destination port is matched, the LSN application profile is applied for the LSN session. Separate a range of ports with a hyphen. For example, 40-90. Minimum value: 1
sessiontimeout Timeout, in seconds, for an idle LSN session. If an LSN session is idle for a time that exceeds this value, the Citrix ADC removes the session.This timeout does not apply for a TCP LSN session when a FIN or RST message is received from either of the endpoints. Default value: 30 Minimum value: 5 Maximum value: 600
Example
add lsn appsattributes s1 TCP -port 53 -sesstimeout 30
show lsn appsattributes
Display LSN Application Port ATTRIBUTES.
Arguments
name Name for the LSN Application Port ATTRIBUTES. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN application profile is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn application profile1" or 'lsn application profile1').
Output
transportprotocol Name of the protocol(TCP,UDP) for which the parameters of this LSN application port ATTRIBUTES applies
sessiontimeout Timeout, in seconds, for an idle LSN session. If an LSN session is idle for a time that exceeds this value, the Citrix ADC removes the session.This timeout does not apply for a TCP LSN session when a FIN or RST message is received from either of the endpoints.
port This is used for Displaying Port/Port range in CLI/Nitro.Lowport, Highport values are populated and used for displaying.Port numbers or range of port numbers to match against the destination port of the incoming packet from a subscriber. When the destination port is matched, the LSN application profile is applied for the LSN session. Separate a range of ports with a hyphen. For example, 40-90.
firstport Indicates first parameter of Port-range. Lowport and Highport will be same for single port value.Port numbers or range of port numbers to match against the destination port of the incoming packet from a subscriber. When the destination port is matched, the LSN application profile is applied for the LSN session. Separate a range of ports with a hyphen. For example, 40-90.
lastport Indicates second parameter of Port-range.Low port and Highport will be same for single port value.Port numbers or range of port numbers to match against the destination port of the incoming packet from a subscriber. When the destination port is matched, the LSN application profile is applied for the LSN session. Separate a range of ports with a hyphen. For example, 40-90.
devno count stateflag
Example
show lsn APPSATTRIBUTES s1
rm lsn appsattributes
Remove LSN Application Port ATTRIBUTES.
Synopsis
rm lsn appsattributes <name>
Arguments
name Name for the LSN Application Port ATTRIBUTES. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN application profile is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn application profile1" or 'lsn application profile1').
Example
rm lsn APPSATTRIBUTES s1
unset lsn appsattributes
Use this command to remove lsn appsattributes settings.Refer to the set lsn appsattributes command for meanings of the arguments.
Synopsis
unset lsn appsattributes <name> -sessiontimeout