lacp

Last published : Oct 30, 2026
Configuration for Link aggregation control protocol resource.
Related information
Configuration

Properties

(click to see Operations )
Name Data Type Permissions Description
syspriority <Integer> Read-write Priority number that determines which peer device of an LACP LA channel can have control over the LA channel. This parameter is globally applied to all LACP channels on the Citrix ADC. The lower the number, the higher the priority.
Default value: 32768
Minimum value = 1
Maximum value = 65535
ownernode <Integer> Read-write The owner node in a cluster for which we want to set the lacp priority. Owner node can vary from 0 to 31. Ownernode value of 254 is used for Cluster.
Default value: 255
devicename <String> Read-only Name of the channel.
mac <String> Read-only LACP system MAC.
flags <Integer> Read-only Flags of this channel.
lacpkey <Integer> Read-only LACP key of this channel.
clustersyspriority <Integer> Read-only LACP system (Cluster) priority.
clustermac <String> Read-only LACP system (Cluster) mac.
_nextgenapiresource <String> Read-only .
__count <Double> Read-only count parameter

Operations

(click to see Properties )
  • UPDATE
  • GET (ALL)
  • GET
  • COUNT
Some options that you can use for each operations:
  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
    To do this, you must specify the username and password in the request header of the NITRO request as follows:
    X-NITRO-USER: <username>
    X-NITRO-PASS: <password>
    Note: In such cases, make sure that the request header DOES not include the following:
    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/lacp HTTP Method: PUT
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Content-Type:application/json
Request Payload:
{"lacp":{
<b>"syspriority":<Integer_value>,
</b>"ownernode":<Integer_value>
}}
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/lacp Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/lacp? attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
filter http:// <netscaler-ip-address> /nitro/v1/config/lacp? filter=property-name1:property-val1,property-name2:property-val2
Use this query-parameter to get the filtered set of lacp resources configured on NetScaler.Filtering can be done on any of the properties of the resource.
view http:// <netscaler-ip-address> /nitro/v1/config/lacp? view=summary
Use this query-parameter to get the summary output of lacp resources configured on NetScaler.
Note: By default, the retrieved results are displayed in detail view (?view=detail).
pagination http:// <netscaler-ip-address> /nitro/v1/config/lacp? pagesize=#no;pageno=#no
Use this query-parameter to get the lacp resources in chunks.
HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "lacp": [ {
"ownernode":<Integer_value>,
"devicename":<String_value>,
"syspriority":<Integer_value>,
"mac":<String_value>,
"flags":<Integer_value>,
"lacpkey":<Integer_value>,
"clustersyspriority":<Integer_value>,
"clustermac":<String_value>,
"_nextgenapiresource":<String_value>
}]}

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/lacp/ ownernode_value<Integer> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/lacp/ ownernode_value<Integer> ? attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
view http:// <netscaler-ip-address> /nitro/v1/config/lacp/ ownernode_value<Integer> ? view=summary
Use this query-parameter to get the summary output of lacp resources configured on NetScaler.
Note: By default, the retrieved results are displayed in detail view (?view=detail).
HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{  "lacp": [ {
"ownernode":<Integer_value>,
"devicename":<String_value>,
"syspriority":<Integer_value>,
"mac":<String_value>,
"flags":<Integer_value>,
"lacpkey":<Integer_value>,
"clustersyspriority":<Integer_value>,
"clustermac":<String_value>,
"_nextgenapiresource":<String_value>
}]}

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/lacp? count=yes HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "lacp": [ { "__count": "#no"} ] }