blx_device_profile
Configuration for Device profile for Citrix ADC BLX instances resource.
Properties
(click to see Operations )
Name | Data Type | Permissions | Description |
---|---|---|---|
name |
|
Read-write | Profile Name.
Minimum length = 1 Maximum length = 128 |
svm_ns_comm |
|
Read-write | Communication protocol (http or https) with Instances.
Minimum length = 1 Maximum length = 10 |
use_global_setting_for_communication_with_ns |
|
Read-write | True, if the communication with Instance needs to be global and not device specific. |
id |
|
Read-write | Id is system generated key for all the device profiles. |
type |
|
Read-write | Profile Type, This must be with in specified supported instance types: blx,sdvanvw,ns,nssdx,cbwanopt,cpx.
Minimum length = 1 Maximum length = 128 |
ns_profile_name |
|
Read-write | Profile Name, This is one of the already created Citrix ADC profiles. |
password |
|
Read-write | Instance credentials.Password for this profile.
Minimum length = 1 Maximum length = 127 |
snmpsecuritylevel |
|
Read-write | SNMP v3 security level for this profile. |
username |
|
Read-write | Instance credentials.Username provided in the profile will be used to contact the instance.
Minimum length = 1 Maximum length = 127 |
snmpauthprotocol |
|
Read-write | SNMP v3 auth protocol for this profile. |
ssh_port |
|
Read-write | SSH port to connect to the device. |
snmpprivprotocol |
|
Read-write | SNMP v3 priv protocol for this profile. |
host_password |
|
Read-write | Host Password for this profile.Used for BLX form factor of ADC.
Minimum length = 1 Maximum length = 127 |
snmpversion |
|
Read-write | SNMP version for this profile. |
passphrase |
|
Read-write | Passphrase with which private key is encrypted. |
host_username |
|
Read-write | Host User Name for this profile.Used for BLX form factor of ADC.
Minimum length = 1 Maximum length = 127 |
snmpsecurityname |
|
Read-write | SNMP v3 security name for this profile.
Maximum length = 31 |
ssl_private_key |
|
Read-write | SSL Private Key for key based authentication. |
ssl_cert |
|
Read-write | SSL Certificate for certificate based authentication. |
http_port |
|
Read-write | HTTP port to connect to the device. |
snmpcommunity |
|
Read-write | SNMP community for this profile.
Maximum length = 31 |
https_port |
|
Read-write | HTTPS port to connect to the device. |
max_wait_time_reboot |
|
Read-write | Max waiting time to reboot Citrix ADC. |
snmpprivpassword |
|
Read-write | SNMP v3 priv password for this profile.
Minimum length = 8 Maximum length = 31 |
cb_profile_name |
|
Read-write | Profile Name, This is one of the already created Citrix SD-WAN profiles. |
snmpauthpassword |
|
Read-write | SNMP v3 auth password for this profile.
Minimum length = 8 Maximum length = 31 |
is_default |
|
Read-only | True, if this profile is system generated and can not be deleted. |
tenant_id |
|
Read-only | Tenant Id of device profile. |
Operations
(click to see Properties )
- ADD
- DELETE
- GET (ALL)
- GET
- UPDATE
Some options that you can use for each operations:
-
Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
-
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
*Note:
*
Mandatory parameters are marked in
red
and placeholder content is marked in
green
The following parameters can be used in the nitro request : onerror <String_value>
Use this parameter to set the onerror status for nitro request. Applicable only for bulk requests.
Default value: EXIT
Possible values = EXIT, CONTINUE
add
URL: https://<MGMT-IP>/nitro/v2/config/blx_device_profile?onerror=<String_value> HTTPS Method: POST
Request Headers: Content-Type: application/json
X-NITRO-USER:username_value<String>
X-NITRO-PASS:password_value<String>
or
Cookie:NITRO_AUTH_TOKEN=token_value<String>
Request Payload:
{"blx_device_profile": {
<b>"name":<String_value></b>,
<b>"password":<String_value></b>,
<b>"username":<String_value></b>,
"snmpsecuritylevel":<String_value>,
"svm_ns_comm":<String_value>,
"ssh_port":<String_value>,
"host_password":<String_value>,
"snmpversion":<String_value>,
"use_global_setting_for_communication_with_ns":<Boolean_value>,
"id":<String_value>,
"type":<String_value>,
"ssl_private_key":<String_value>,
"ssl_cert":<String_value>,
"http_port":<Integer_value>,
"https_port":<Integer_value>,
"max_wait_time_reboot":<String_value>,
"snmpprivpassword":<String_value>,
"cb_profile_name":<String_value>,
"ns_profile_name":<String_value>,
"snmpauthprotocol":<String_value>,
"snmpprivprotocol":<String_value>,
"passphrase":<String_value>,
"host_username":<String_value>,
"snmpsecurityname":<String_value>,
"snmpcommunity":<String_value>,
"snmpauthpassword":<String_value>}}
Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error
Response Payload:
{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "blx_device_profile":[{
"name":<String_value>,
"svm_ns_comm":<String_value>,
"use_global_setting_for_communication_with_ns":<Boolean_value>,
"id":<String_value>,
"is_default":<Boolean_value>,
"type":<String_value>,
"tenant_id":<String_value>,
"ns_profile_name":<String_value>,
"password":<String_value>,
"snmpsecuritylevel":<String_value>,
"username":<String_value>,
"snmpauthprotocol":<String_value>,
"ssh_port":<String_value>,
"snmpprivprotocol":<String_value>,
"host_password":<String_value>,
"snmpversion":<String_value>,
"passphrase":<String_value>,
"host_username":<String_value>,
"snmpsecurityname":<String_value>,
"ssl_private_key":<String_value>,
"ssl_cert":<String_value>,
"http_port":<Integer_value>,
"snmpcommunity":<String_value>,
"https_port":<Integer_value>,
"max_wait_time_reboot":<String_value>,
"snmpprivpassword":<String_value>,
"cb_profile_name":<String_value>,
"snmpauthpassword":<String_value>}]}
delete
URL: https://<MGMT-IP>/nitro/v2/config/blx_device_profile/id_value<String> HTTPS Method: DELETE
Request Headers: X-NITRO-USER:username_value<String>
X-NITRO-PASS:password_value<String>
or
Cookie:NITRO_AUTH_TOKEN=token_value<String>
Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error
Response Payload:
{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt }
get (all)
URL: https://<MGMT-IP>/nitro/v2/config/blx_device_profile Query-parameters:
filter https://<MGMT-IP>/nitro/v2/config/blx_device_profile ?filter=property-name1:property-value1,property-name2:property-value2 Use this query-parameter to get the filtered set of blx_device_profile resources configured on the system. You can set a filter on any property of the resource.
pagesize=#no;pageno=#no https://<MGMT-IP>/nitro/v2/config/blx_device_profile ?pagesize=#no;pageno=#no Use this query-parameter to get the blx_device_profile resources in chunks.
count https://<MGMT-IP>/nitro/v2/config/blx_device_profile ?count=yes Use this query-parameter to get the count of blx_device_profile resources.
HTTPS Method: GET
Request Headers: Accept: application/json
X-NITRO-USER:username_value<String>
X-NITRO-PASS:password_value<String>
or
Cookie:NITRO_AUTH_TOKEN=token_value<String>
Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error
Response Headers:
Content-Type:application/json
Response Payload:
{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "blx_device_profile":[{
"name":<String_value>,
"svm_ns_comm":<String_value>,
"use_global_setting_for_communication_with_ns":<Boolean_value>,
"id":<String_value>,
"is_default":<Boolean_value>,
"type":<String_value>,
"tenant_id":<String_value>,
"ns_profile_name":<String_value>,
"password":<String_value>,
"snmpsecuritylevel":<String_value>,
"username":<String_value>,
"snmpauthprotocol":<String_value>,
"ssh_port":<String_value>,
"snmpprivprotocol":<String_value>,
"host_password":<String_value>,
"snmpversion":<String_value>,
"passphrase":<String_value>,
"host_username":<String_value>,
"snmpsecurityname":<String_value>,
"ssl_private_key":<String_value>,
"ssl_cert":<String_value>,
"http_port":<Integer_value>,
"snmpcommunity":<String_value>,
"https_port":<Integer_value>,
"max_wait_time_reboot":<String_value>,
"snmpprivpassword":<String_value>,
"cb_profile_name":<String_value>,
"snmpauthpassword":<String_value>}]}
get
URL: https://<MGMT-IP>/nitro/v2/config/blx_device_profile/id_value<String> HTTPS Method: GET
Request Headers: Accept: application/json
X-NITRO-USER:username_value<String>
X-NITRO-PASS:password_value<String>
or
Cookie:NITRO_AUTH_TOKEN=token_value<String>
Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error
Response Headers:
Content-Type:application/json
Response Payload:
{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "blx_device_profile":[{
"name":<String_value>,
"svm_ns_comm":<String_value>,
"use_global_setting_for_communication_with_ns":<Boolean_value>,
"id":<String_value>,
"is_default":<Boolean_value>,
"type":<String_value>,
"tenant_id":<String_value>,
"ns_profile_name":<String_value>,
"password":<String_value>,
"snmpsecuritylevel":<String_value>,
"username":<String_value>,
"snmpauthprotocol":<String_value>,
"ssh_port":<String_value>,
"snmpprivprotocol":<String_value>,
"host_password":<String_value>,
"snmpversion":<String_value>,
"passphrase":<String_value>,
"host_username":<String_value>,
"snmpsecurityname":<String_value>,
"ssl_private_key":<String_value>,
"ssl_cert":<String_value>,
"http_port":<Integer_value>,
"snmpcommunity":<String_value>,
"https_port":<Integer_value>,
"max_wait_time_reboot":<String_value>,
"snmpprivpassword":<String_value>,
"cb_profile_name":<String_value>,
"snmpauthpassword":<String_value>}]}
update
URL: https://<MGMT-IP>/nitro/v2/config/blx_device_profile/id_value<String> HTTPS Method: PUT
Request Headers: Content-Type: application/json
X-NITRO-USER:username_value<String>
X-NITRO-PASS:password_value<String>
or
Cookie:NITRO_AUTH_TOKEN=token_value<String>
Request Payload:
{"blx_device_profile":{
<b>"id":<String_value></b>,
"password":<String_value>,
"snmpsecuritylevel":<String_value>,
"name":<String_value>,
"svm_ns_comm":<String_value>,
"ssh_port":<String_value>,
"host_password":<String_value>,
"snmpversion":<String_value>,
"use_global_setting_for_communication_with_ns":<Boolean_value>,
"type":<String_value>,
"ssl_private_key":<String_value>,
"ssl_cert":<String_value>,
"http_port":<Integer_value>,
"https_port":<Integer_value>,
"max_wait_time_reboot":<String_value>,
"snmpprivpassword":<String_value>,
"cb_profile_name":<String_value>,
"ns_profile_name":<String_value>,
"username":<String_value>,
"snmpauthprotocol":<String_value>,
"snmpprivprotocol":<String_value>,
"passphrase":<String_value>,
"host_username":<String_value>,
"snmpsecurityname":<String_value>,
"snmpcommunity":<String_value>,
"snmpauthpassword":<String_value>}}
Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error
Response Payload:
{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "blx_device_profile":[{
"name":<String_value>,
"svm_ns_comm":<String_value>,
"use_global_setting_for_communication_with_ns":<Boolean_value>,
"id":<String_value>,
"is_default":<Boolean_value>,
"type":<String_value>,
"tenant_id":<String_value>,
"ns_profile_name":<String_value>,
"password":<String_value>,
"snmpsecuritylevel":<String_value>,
"username":<String_value>,
"snmpauthprotocol":<String_value>,
"ssh_port":<String_value>,
"snmpprivprotocol":<String_value>,
"host_password":<String_value>,
"snmpversion":<String_value>,
"passphrase":<String_value>,
"host_username":<String_value>,
"snmpsecurityname":<String_value>,
"ssl_private_key":<String_value>,
"ssl_cert":<String_value>,
"http_port":<Integer_value>,
"snmpcommunity":<String_value>,
"https_port":<Integer_value>,
"max_wait_time_reboot":<String_value>,
"snmpprivpassword":<String_value>,
"cb_profile_name":<String_value>,
"snmpauthpassword":<String_value>}]}