ns_snmp_config
Configuration for SNMP configuration resource.
Properties
(click to see Operations )
Name | Data Type | Permissions | Description |
---|---|---|---|
save_config |
|
Read-write | true, if save config is required. |
trapdestination |
|
Read-write | State of configuration (enable/disable). |
snmpauthprotocol |
|
Read-write | SNMP v3 auth protocol. |
snmpsecurityname |
|
Read-write | SNMP v3 security name.
Maximum length = 31 |
snmpprivprotocol |
|
Read-write | SNMP v3 priv protocol. |
ns_ip_address_arr | <String[]> | Read-write | List of Citrix ADC IP Address.
Maximum length = 64 |
state |
|
Read-write | State of configuration (enable/disable). |
ns_ip_address |
|
Read-write | Citrix ADC IP Address.
Minimum length = 1 Maximum length = 64 |
snmpsecuritylevel |
|
Read-write | SNMP v3 security level. |
snmpcommunity |
|
Read-write | SNMP community.
Maximum length = 31 |
snmpprivpassword |
|
Read-write | SNMP v3 priv password.
Minimum length = 8 Maximum length = 31 |
snmpversion |
|
Read-write | SNMP version. |
snmpauthpassword |
|
Read-write | SNMP v3 auth password.
Minimum length = 8 Maximum length = 31 |
Operations
(click to see Properties )
- ADD
- UPDATE
Some options that you can use for each operations:
-
Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
-
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
*Note:
*
Mandatory parameters are marked in
red
and placeholder content is marked in
green
The following parameters can be used in the nitro request : onerror <String_value>
Use this parameter to set the onerror status for nitro request. Applicable only for bulk requests.
Default value: EXIT
Possible values = EXIT, CONTINUE
add
URL: https://<MGMT-IP>/nitro/v2/config/ns_snmp_config?onerror=<String_value> HTTPS Method: POST
Request Headers: Content-Type: application/json
X-NITRO-USER:username_value<String>
X-NITRO-PASS:password_value<String>
or
Cookie:NITRO_AUTH_TOKEN=token_value<String>
Request Payload:
{"ns_snmp_config": {
<b>"ns_ip_address":<String_value></b>,
<b>"snmpversion":<String_value></b>,
"snmpsecuritylevel":<String_value>,
"save_config":<Boolean_value>,
"ns_ip_address_arr":<String_value[]>,
"trapdestination":<String_value>,
"snmpprivpassword":<String_value>,
"snmpauthprotocol":<String_value>,
"snmpprivprotocol":<String_value>,
"state":<String_value>,
"snmpsecurityname":<String_value>,
"snmpcommunity":<String_value>,
"snmpauthpassword":<String_value>}}
Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error
Response Payload:
{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "ns_snmp_config":[{
"save_config":<Boolean_value>,
"trapdestination":<String_value>,
"snmpauthprotocol":<String_value>,
"snmpsecurityname":<String_value>,
"snmpprivprotocol":<String_value>,
"ns_ip_address_arr":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"snmpsecuritylevel":<String_value>,
"snmpcommunity":<String_value>,
"snmpprivpassword":<String_value>,
"snmpversion":<String_value>,
"snmpauthpassword":<String_value>}]}
update
URL: https://<MGMT-IP>/nitro/v2/config/ns_snmp_config/ HTTPS Method: PUT
Request Headers: Content-Type: application/json
X-NITRO-USER:username_value<String>
X-NITRO-PASS:password_value<String>
or
Cookie:NITRO_AUTH_TOKEN=token_value<String>
Request Payload:
{"ns_snmp_config":{
"ns_ip_address":<String_value>,
"snmpsecuritylevel":<String_value>,
"save_config":<Boolean_value>,
"snmpversion":<String_value>,
"ns_ip_address_arr":<String_value[]>,
"trapdestination":<String_value>,
"snmpprivpassword":<String_value>,
"snmpauthprotocol":<String_value>,
"snmpprivprotocol":<String_value>,
"state":<String_value>,
"snmpsecurityname":<String_value>,
"snmpcommunity":<String_value>,
"snmpauthpassword":<String_value>}}
Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error
Response Payload:
{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "ns_snmp_config":[{
"save_config":<Boolean_value>,
"trapdestination":<String_value>,
"snmpauthprotocol":<String_value>,
"snmpsecurityname":<String_value>,
"snmpprivprotocol":<String_value>,
"ns_ip_address_arr":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"snmpsecuritylevel":<String_value>,
"snmpcommunity":<String_value>,
"snmpprivpassword":<String_value>,
"snmpversion":<String_value>,
"snmpauthpassword":<String_value>}]}