This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
gslbservice
Statistics for GSLB service resource.
Properties
(click to see Operations )
| Name | Data Type | Permissions | Description |
|---|---|---|---|
| servicename |
|
Read-write | Name of the GSLB service.
Minimum length = 1 |
| clearstats |
|
Read-write | Clear the statsistics / counters.
Possible values = basic, full |
| establishedconn |
|
Read-only | Number of client connections in ESTABLISHED state. |
| primaryipaddress |
|
Read-only | The IP address on which the service is running. |
| primaryport |
|
Read-only | The port on which the service is running. |
| servicetype |
|
Read-only | The service type of this service.Possible values are ADNS, DNS, MYSQL, RTSP, SSL_DIAMETER, ADNS_TCP, DNS_TCP, NNTP, SIP_UDP, SSL_TCP, ANY, FTP, RADIUS, SNMP, TCP, DHCPRA, HTTP, RDP, SSL, TFTP, DIAMETER, MSSQL, RPCSVR, SSL_BRIDGE, UDP |
| state |
|
Read-only | Current state of the server. There are seven possible values: UP(7), DOWN(1), UNKNOWN(2), BUSY(3), OFS(Out of Service)(4), TROFS(Transition Out of Service)(5), TROFS_DOWN(Down When going Out of Service)(8) |
| totalrequestbytes |
|
Read-only | Total number of request bytes received on this service or virtual server. |
| requestbytesrate |
|
Read-only | Rate (/s) counter for totalrequestbytes |
| totalresponsebytes |
|
Read-only | Number of response bytes received by this service or virtual server. |
| responsebytesrate |
|
Read-only | Rate (/s) counter for totalresponsebytes |
| curload |
|
Read-only | Load on the service that is calculated from the bound load based monitor. |
| totalrequests |
|
Read-only | Total number of requests received on this service or virtual server. (This applies to HTTP/SSL services and servers.) |
| requestsrate |
|
Read-only | Rate (/s) counter for totalrequests |
| totalresponses |
|
Read-only | Number of responses received on this service or virtual server. (This applies to HTTP/SSL services and servers.) |
| responsesrate |
|
Read-only | Rate (/s) counter for totalresponses |
| curclntconnections |
|
Read-only | Number of current client connections. |
| cursrvrconnections |
|
Read-only | Number of current connections to the actual servers behind the virtual server. |
| vsvrservicehits |
|
Read-only | Number of times that the service has been provided. |
| vsvrservicehitsrate |
|
Read-only | Rate (/s) counter for vsvrservicehits |
Operations
(click to see Properties )
- GET (ALL)
- GET
Some options that you can use for each operations:
-
Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
-
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
*Note:
*
Mandatory parameters are marked in red and placeholder content is marked in green
get (all)
URL: http:// <netscaler-ip-address> /nitro/v1/stat/gslbservice
Query-parameters:
args
http:// <netscaler-ip-address> /nitro/v1/stat/gslbservice? args=servicename: <String_value> ,detail: <Boolean_value> ,fullvalues: <Boolean_value> ,ntimes: <Double_value> ,logfile: <String_value> ,clearstats: <String_value>
Use this query-parameter to get gslbservice resources based on additional properties.
HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response:
HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "gslbservice": [ {
"servicename":<String_value>,
"curclntconnections":<Double_value>,
"servicetype":<String_value>,
"establishedconn":<Double_value>,
"totalrequests":<Double_value>,
"responsebytesrate":<Double_value>,
"totalresponses":<Double_value>,
"requestbytesrate":<Double_value>,
"cursrvrconnections":<Double_value>,
"primaryipaddress":<String_value>,
"responsesrate":<Double_value>,
"curload":<Double_value>,
"totalrequestbytes":<Double_value>,
"state":<String_value>,
"vsvrservicehits":<Double_value>,
"totalresponsebytes":<Double_value>,
"primaryport":<Integer_value>,
"requestsrate":<Double_value>,
"vsvrservicehitsrate":<Double_value>
}]}
<!--NeedCopy-->
get
URL: http:// <netscaler-ip-address> /nitro/v1/stat/gslbservice/ servicename_value><String>
HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response:
HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "gslbservice": [ {
"servicename":<String_value>,
"curclntconnections":<Double_value>,
"servicetype":<String_value>,
"establishedconn":<Double_value>,
"totalrequests":<Double_value>,
"responsebytesrate":<Double_value>,
"totalresponses":<Double_value>,
"requestbytesrate":<Double_value>,
"cursrvrconnections":<Double_value>,
"primaryipaddress":<String_value>,
"responsesrate":<Double_value>,
"curload":<Double_value>,
"totalrequestbytes":<Double_value>,
"state":<String_value>,
"vsvrservicehits":<Double_value>,
"totalresponsebytes":<Double_value>,
"primaryport":<Integer_value>,
"requestsrate":<Double_value>,
"vsvrservicehitsrate":<Double_value>
}]}
<!--NeedCopy-->
Share
Share
In this article
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.