protocolipv6
Statistics for ip v6 resource.
Properties
(click to see Operations )
| Name | Data Type | Permissions | Description |
|---|---|---|---|
| clearstats |
|
Read-write | Clear the statsistics / counters.
Possible values = basic, full |
| ipv6totrxpkts |
|
Read-only | IPv6 packets received. |
| ipv6rxpktsrate |
|
Read-only | Rate (/s) counter for ipv6totrxpkts |
| ipv6totrxbytes |
|
Read-only | Bytes of IPv6 data received. |
| ipv6rxbytesrate |
|
Read-only | Rate (/s) counter for ipv6totrxbytes |
| ipv6tottxpkts |
|
Read-only | IPv6 packets transmitted |
| ipv6txpktsrate |
|
Read-only | Rate (/s) counter for ipv6tottxpkts |
| ipv6tottxbytes |
|
Read-only | Bytes of IPv6 data transmitted. |
| ipv6txbytesrate |
|
Read-only | Rate (/s) counter for ipv6tottxbytes |
| ipv6totroutepkts |
|
Read-only | IPv6 packets routed. |
| ipv6routepktsrate |
|
Read-only | Rate (/s) counter for ipv6totroutepkts |
| ipv6totroutembits |
|
Read-only | IPv6 total Mbits. |
| ipv6routembitsrate |
|
Read-only | Rate (/s) counter for ipv6totroutembits |
| ipv6fragtotrxpkts |
|
Read-only | IPv6 fragments received. |
| ipv6fragrxpktsrate |
|
Read-only | Rate (/s) counter for ipv6fragtotrxpkts |
| ipv6fragtottcpreassembled |
|
Read-only | TCP fragments processed after reassembly. |
| ipv6fragtcpreassembledrate |
|
Read-only | Rate (/s) counter for ipv6fragtottcpreassembled |
| ipv6fragtotudpreassembled |
|
Read-only | UDP fragments processed after reassembly. |
| ipv6fragudpreassembledrate |
|
Read-only | Rate (/s) counter for ipv6fragtotudpreassembled |
| ipv6fragtotpktsprocessnoreass |
|
Read-only | IPv6 fragments processed without reassembly. |
| ipv6fragpktsprocessnoreassrate |
|
Read-only | Rate (/s) counter for ipv6fragtotpktsprocessnoreass |
| ipv6fragtotpktsforward |
|
Read-only | IPv6 fragments forwarded to the client or server without reassembly. |
| ipv6fragpktsforwardrate |
|
Read-only | Rate (/s) counter for ipv6fragtotpktsforward |
| ipv6errhdr |
|
Read-only | Packets received that contain an error in one or more components of the IPv6 header. |
| ipv6nextheadererr |
|
Read-only | Packets received that contain an unsupported next header. The supported next headers are TCP, ICMP, UDP, OSPF, and FRAGMENT. |
| ipv6landattack |
|
Read-only | Land-attack packets received. The source and destination addresses are the same. If not dropped, these packets can lock up the appliance. |
| ipv6fragpkttoobig |
|
Read-only | Packets received for which the reassembled data exceeds the Ethernet packet data length of 1500 bytes. |
| ipv6fragzerolenpkt |
|
Read-only | Packets received with a fragment length of 0 bytes. |
| ipv6toticmpnarx |
|
Read-only | Number of ICMPv6 NA packets received by Citrix ADC (OBSOLETE). |
| ipv6icmpnarxrate |
|
Read-only | Rate (/s) counter for ipv6toticmpnarx |
| ipv6toticmpnsrx |
|
Read-only | Number of ICMPv6 NS packets received by Citrix ADC (OBSOLETE). |
| ipv6icmpnsrxrate |
|
Read-only | Rate (/s) counter for ipv6toticmpnsrx |
| ipv6toticmpnatx |
|
Read-only | Number of ICMPv6 NA packets transmitted by Citrix ADC (OBSOLETE). |
| ipv6icmpnatxrate |
|
Read-only | Rate (/s) counter for ipv6toticmpnatx |
| ipv6toticmpnstx |
|
Read-only | Number of ICMPv6 NS packets transmitted by Citrix ADC (OBSOLETE). |
| ipv6icmpnstxrate |
|
Read-only | Rate (/s) counter for ipv6toticmpnstx |
| ipv6toticmprarx |
|
Read-only | Number of ICMPv6 RA packets received by Citrix ADC (OBSOLETE). |
| ipv6icmprarxrate |
|
Read-only | Rate (/s) counter for ipv6toticmprarx |
| ipv6toticmprstx |
|
Read-only | Number of ICMPv6 RS packets transmitted by Citrix ADC (OBSOLETE). |
| ipv6icmprstxrate |
|
Read-only | Rate (/s) counter for ipv6toticmprstx |
| ipv6toticmprx |
|
Read-only | Number of ICMPv6 packets received by Citrix ADC (OBSOLETE). |
| ipv6icmprxrate |
|
Read-only | Rate (/s) counter for ipv6toticmprx |
| ipv6toticmptx |
|
Read-only | Number of ICMPv6 packets transmitted by Citrix ADC (OBSOLETE). |
| ipv6icmptxrate |
|
Read-only | Rate (/s) counter for ipv6toticmptx |
| ipv6errrxhdr |
|
Read-only | Number of erroneous header packets received (OBSOLETE). |
| ipv6errrxpkt |
|
Read-only | Number of erroneous packets received (OBSOLETE). |
| ipv6badcksum |
|
Read-only | Number of bad checksum packets received (OBSOLETE). |
| icmpv6error |
|
Read-only | Number of erroneous ICMPv6 packets received (OBSOLETE). |
| icmpv6unspt |
|
Read-only | Number of ICMPv6 unsupported packets received (OBSOLETE). |
| icmpv6rtthsld |
|
Read-only | Number of ICMPv6 packets dropped for rate threshold exceeded (OBSOLETE). |
Operations
(click to see Properties )
- GET (ALL)
Some options that you can use for each operations:
-
Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
-
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
*Note:
*
Mandatory parameters are marked in red and placeholder content is marked in green
get (all)
URL: http:// <netscaler-ip-address> /nitro/v1/stat/protocolipv6
Query-parameters:
args
http:// <netscaler-ip-address> /nitro/v1/stat/protocolipv6? args=detail: <Boolean_value> ,fullvalues: <Boolean_value> ,ntimes: <Double_value> ,logfile: <String_value> ,clearstats: <String_value>
Use this query-parameter to get protocolipv6 resources based on additional properties.
HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response:
HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "protocolipv6": [ {
"ipv6fragpktsforwardrate":<Double_value>,
"ipv6fragpkttoobig":<Double_value>,
"ipv6toticmpnsrx":<Double_value>,
"icmpv6unspt":<Double_value>,
"ipv6icmpnstxrate":<Double_value>,
"ipv6rxbytesrate":<Double_value>,
"ipv6fragpktsprocessnoreassrate":<Double_value>,
"ipv6icmpnarxrate":<Double_value>,
"ipv6fragtotpktsforward":<Double_value>,
"ipv6totroutepkts":<Double_value>,
"ipv6toticmpnatx":<Double_value>,
"ipv6toticmprstx":<Double_value>,
"icmpv6error":<Double_value>,
"ipv6routembitsrate":<Double_value>,
"icmpv6rtthsld":<Double_value>,
"ipv6toticmprx":<Double_value>,
"ipv6routepktsrate":<Double_value>,
"ipv6icmptxrate":<Double_value>,
"ipv6tottxpkts":<Double_value>,
"ipv6fragrxpktsrate":<Double_value>,
"ipv6badcksum":<Double_value>,
"ipv6totrxpkts":<Double_value>,
"ipv6fragtotpktsprocessnoreass":<Double_value>,
"ipv6toticmpnstx":<Double_value>,
"ipv6landattack":<Double_value>,
"ipv6icmprstxrate":<Double_value>,
"ipv6fragtotrxpkts":<Double_value>,
"ipv6icmpnatxrate":<Double_value>,
"ipv6errrxhdr":<Double_value>,
"ipv6rxpktsrate":<Double_value>,
"ipv6errhdr":<Double_value>,
"ipv6icmprxrate":<Double_value>,
"ipv6errrxpkt":<Double_value>,
"ipv6nextheadererr":<Double_value>,
"ipv6tottxbytes":<Double_value>,
"ipv6toticmpnarx":<Double_value>,
"ipv6txpktsrate":<Double_value>,
"ipv6totrxbytes":<Double_value>,
"ipv6txbytesrate":<Double_value>,
"ipv6fragzerolenpkt":<Double_value>,
"ipv6icmprarxrate":<Double_value>,
"ipv6icmpnsrxrate":<Double_value>,
"ipv6fragtcpreassembledrate":<Double_value>,
"ipv6fragtotudpreassembled":<Double_value>,
"ipv6fragtottcpreassembled":<Double_value>,
"ipv6fragudpreassembledrate":<Double_value>,
"ipv6totroutembits":<Double_value>,
"ipv6toticmptx":<Double_value>,
"ipv6toticmprarx":<Double_value>
}]}
<!--NeedCopy-->