ADC NITRO APIs

nsacl

Statistics for ACL entry resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
aclname Read-write Name of the extended ACL rule whose statistics you want the Citrix ADC to display.

Minimum length = 1
clearstats Read-write Clear the statsistics / counters.

Possible values = basic, full
acltotpktsbridged Read-only Packets matching a bridge ACL, which is in transparent mode and bypasses service processing.
aclpktsbridgedrate Read-only Rate (/s) counter for acltotpktsbridged
acltotpktsdenied Read-only Packets dropped because they match ACLs with processing mode set to DENY.
aclpktsdeniedrate Read-only Rate (/s) counter for acltotpktsdenied
acltotpktsallowed Read-only Packets matching ACLs with processing mode set to ALLOW. Citrix ADC processes these packets.
aclpktsallowedrate Read-only Rate (/s) counter for acltotpktsallowed
acltotpktsnat Read-only Packets matching a NAT ACL, resulting in a NAT session.
aclpktsnatrate Read-only Rate (/s) counter for acltotpktsnat
acltothits Read-only Packets matching an ACL.
aclhitsrate Read-only Rate (/s) counter for acltothits
acltotmisses Read-only Packets not matching any ACL.
aclmissesrate Read-only Rate (/s) counter for acltotmisses
acltotcount Read-only Total number of ACL rules configured.
dfdacltothits Read-only Packets matching an dfd ACL.
dfdaclhitsrate Read-only Rate (/s) counter for dfdacltothits
dfdacltotmisses Read-only Packets not matching any DFD ACL.
dfdaclmissesrate Read-only Rate (/s) counter for dfdacltotmisses
dfdacltotcount Read-only Total number of DFD ACL rules configured.
aclperhits Read-only Number of times the acl was hit
aclperhitsrate Read-only Rate (/s) counter for aclperhits

Operations

(click to see Properties )

  • GET (ALL)
  • GET

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: *

Mandatory parameters are marked in red and placeholder content is marked in green

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/stat/nsacl

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/stat/nsacl? args=aclname: <String_value> ,detail: <Boolean_value> ,fullvalues: <Boolean_value> ,ntimes: <Double_value> ,logfile: <String_value> ,clearstats: <String_value>

Use this query-parameter to get nsacl resources based on additional properties.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "nsacl": [ { "aclname":<String_value>, "acltotpktsnat":<Double_value>, "aclpktsdeniedrate":<Double_value>, "aclhitsrate":<Double_value>, "aclpktsallowedrate":<Double_value>, "dfdaclhitsrate":<Double_value>, "dfdacltotcount":<Double_value>, "dfdacltothits":<Double_value>, "acltotpktsallowed":<Double_value>, "aclpktsbridgedrate":<Double_value>, "acltotpktsdenied":<Double_value>, "acltothits":<Double_value>, "aclperhits":<Double_value>, "dfdaclmissesrate":<Double_value>, "aclperhitsrate":<Double_value>, "aclpktsnatrate":<Double_value>, "dfdacltotmisses":<Double_value>, "acltotcount":<Double_value>, "acltotmisses":<Double_value>, "acltotpktsbridged":<Double_value>, "aclmissesrate":<Double_value> }]}

get

URL: http:// <netscaler-ip-address> /nitro/v1/stat/nsacl/ aclname_value><String>

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "nsacl": [ { "aclname":<String_value>, "acltotpktsnat":<Double_value>, "aclpktsdeniedrate":<Double_value>, "aclhitsrate":<Double_value>, "aclpktsallowedrate":<Double_value>, "dfdaclhitsrate":<Double_value>, "dfdacltotcount":<Double_value>, "dfdacltothits":<Double_value>, "acltotpktsallowed":<Double_value>, "aclpktsbridgedrate":<Double_value>, "acltotpktsdenied":<Double_value>, "acltothits":<Double_value>, "aclperhits":<Double_value>, "dfdaclmissesrate":<Double_value>, "aclperhitsrate":<Double_value>, "aclpktsnatrate":<Double_value>, "dfdacltotmisses":<Double_value>, "acltotcount":<Double_value>, "acltotmisses":<Double_value>, "acltotpktsbridged":<Double_value>, "aclmissesrate":<Double_value> }]}
nsacl