protocolicmpv6
Statistics for icmpv6 resource.
Properties
(click to see Operations )
| Name | Data Type | Permissions | Description |
|---|---|---|---|
| clearstats |
|
Read-write | Clear the statsistics / counters.
Possible values = basic, full |
| icmpv6totrxpkts |
|
Read-only | ICMPv6 packets received. |
| icmpv6rxpktsrate |
|
Read-only | Rate (/s) counter for icmpv6totrxpkts |
| icmpv6totrxbytes |
|
Read-only | Bytes of ICMPv6 data received. |
| icmpv6rxbytesrate |
|
Read-only | Rate (/s) counter for icmpv6totrxbytes |
| icmpv6tottxpkts |
|
Read-only | ICMPv6 packets transmitted. |
| icmpv6txpktsrate |
|
Read-only | Rate (/s) counter for icmpv6tottxpkts |
| icmpv6tottxbytes |
|
Read-only | Bytes of ICMPv6 data transmitted. |
| icmpv6txbytesrate |
|
Read-only | Rate (/s) counter for icmpv6tottxbytes |
| icmpv6totrxna |
|
Read-only | ICMPv6 neighbor advertisement packets received. These packets are received in response to a neighbor solicitation message sent out by this node, or if the link layer address of a neighbor has changed. |
| icmpv6rxnarate |
|
Read-only | Rate (/s) counter for icmpv6totrxna |
| icmpv6totrxns |
|
Read-only | ICMPv6 neighbor solicitation packets received. These packets are received if the link layer address of a neighbor has changed, or in response to a neighbor solicitation message sent out by this node. |
| icmpv6rxnsrate |
|
Read-only | Rate (/s) counter for icmpv6totrxns |
| icmpv6totrxra |
|
Read-only | ICMPv6 router advertisement packets received. These are received at defined intervals or in response to a router solicitation message. |
| icmpv6rxrarate |
|
Read-only | Rate (/s) counter for icmpv6totrxra |
| icmpv6totrxrs |
|
Read-only | ICMPv6 router solicitation packets received. These could be sent by a neighboring router to initiate address resolution. |
| icmpv6rxrsrate |
|
Read-only | Rate (/s) counter for icmpv6totrxrs |
| icmpv6totrxechoreq |
|
Read-only | ICMPv6 Ping Echo Request packets received. |
| icmpv6rxechoreqrate |
|
Read-only | Rate (/s) counter for icmpv6totrxechoreq |
| icmpv6totrxechoreply |
|
Read-only | ICMPv6 Ping Echo Reply packets received. |
| icmpv6rxechoreplyrate |
|
Read-only | Rate (/s) counter for icmpv6totrxechoreply |
| icmpv6tottxna |
|
Read-only | ICMPv6 neighbor advertisement packets transmitted. These packets are sent in response to a neighbor solicitation packet, or if the link layer address of this node has changed. |
| icmpv6txnarate |
|
Read-only | Rate (/s) counter for icmpv6tottxna |
| icmpv6tottxns |
|
Read-only | ICMPv6 neighbor solicitation packets transmitted. These packets are sent to get the link layer addresses of neighboring nodes or to confirm that they are reachable. |
| icmpv6txnsrate |
|
Read-only | Rate (/s) counter for icmpv6tottxns |
| icmpv6tottxra |
|
Read-only | ICMPv6 router advertisement packets transmitted. These packets are sent at regular intervals or in response to a router solicitation packet from a neighbor. |
| icmpv6txrarate |
|
Read-only | Rate (/s) counter for icmpv6tottxra |
| icmpv6tottxrs |
|
Read-only | ICMPv6 router solicitation packets transmitted. These packets are sent to request neighboring routers to generate router advertisements immediately rather than wait for the next defined time. |
| icmpv6txrsrate |
|
Read-only | Rate (/s) counter for icmpv6tottxrs |
| icmpv6tottxechoreq |
|
Read-only | ICMPv6 Ping Echo Request packets transmitted. |
| icmpv6txechoreqrate |
|
Read-only | Rate (/s) counter for icmpv6tottxechoreq |
| icmpv6tottxechoreply |
|
Read-only | ICMP Ping Echo Reply packets transmitted. |
| icmpv6txechoreplyrate |
|
Read-only | Rate (/s) counter for icmpv6tottxechoreply |
| icmpv6errra |
|
Read-only | ICMPv6 router advertisement error packets received that contain an error in the header, such as an incorrect source IP address, destination IP address, or packet length. |
| icmpv6errna |
|
Read-only | ICMPv6 neighbor advertisement error packets received that contain an error in the header, such as an incorrect source IP address, destination IP address, or packet length. |
| icmpv6errns |
|
Read-only | ICMPv6 neighbor solicitation error packets received that contain an error in the header, such as an incorrect source IP address, destination IP address, or packet length. |
| icmpv6badchecksums |
|
Read-only | Packets received with an ICMPv6 checksum error. |
| icmpv6unspt |
|
Read-only | ICMPv6 packets received that are not supported by the Citrix ADC. |
| icmpv6rtthsld |
|
Read-only | Packets dropped because the default threshold of 100 requests per 10 milliseconds has been exceeded. This is a configurable value using the set rateControl command. |
Operations
(click to see Properties )
- GET (ALL)
Some options that you can use for each operations:
-
Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
-
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
*Note:
*
Mandatory parameters are marked in red and placeholder content is marked in green
get (all)
URL: http:// <netscaler-ip-address> /nitro/v1/stat/protocolicmpv6
Query-parameters:
args
http:// <netscaler-ip-address> /nitro/v1/stat/protocolicmpv6? args=detail: <Boolean_value> ,fullvalues: <Boolean_value> ,ntimes: <Double_value> ,logfile: <String_value> ,clearstats: <String_value>
Use this query-parameter to get protocolicmpv6 resources based on additional properties.
HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response:
HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "protocolicmpv6": [ {
"icmpv6txpktsrate":<Double_value>,
"icmpv6unspt":<Double_value>,
"icmpv6tottxra":<Double_value>,
"icmpv6tottxechoreply":<Double_value>,
"icmpv6txnarate":<Double_value>,
"icmpv6rxpktsrate":<Double_value>,
"icmpv6totrxpkts":<Double_value>,
"icmpv6rxrsrate":<Double_value>,
"icmpv6rxnsrate":<Double_value>,
"icmpv6rtthsld":<Double_value>,
"icmpv6totrxrs":<Double_value>,
"icmpv6txechoreplyrate":<Double_value>,
"icmpv6errns":<Double_value>,
"icmpv6txnsrate":<Double_value>,
"icmpv6txbytesrate":<Double_value>,
"icmpv6tottxns":<Double_value>,
"icmpv6totrxechoreply":<Double_value>,
"icmpv6badchecksums":<Double_value>,
"icmpv6txrsrate":<Double_value>,
"icmpv6tottxna":<Double_value>,
"icmpv6totrxra":<Double_value>,
"icmpv6tottxrs":<Double_value>,
"icmpv6totrxns":<Double_value>,
"icmpv6rxechoreplyrate":<Double_value>,
"icmpv6txechoreqrate":<Double_value>,
"icmpv6errna":<Double_value>,
"icmpv6rxbytesrate":<Double_value>,
"icmpv6totrxna":<Double_value>,
"icmpv6totrxbytes":<Double_value>,
"icmpv6txrarate":<Double_value>,
"icmpv6totrxechoreq":<Double_value>,
"icmpv6tottxechoreq":<Double_value>,
"icmpv6rxrarate":<Double_value>,
"icmpv6rxechoreqrate":<Double_value>,
"icmpv6tottxpkts":<Double_value>,
"icmpv6tottxbytes":<Double_value>,
"icmpv6rxnarate":<Double_value>,
"icmpv6errra":<Double_value>
}]}
<!--NeedCopy-->