lsnnat64
Read/write properties
Properties
(click to see Operations )
| Name | Data Type | Permissions | Description |
|---|---|---|---|
| clearstats |
|
Read-write | Clear the statsistics / counters.
Possible values = basic, full |
| lsncurnat64sessions |
|
Read-only | Current number of LSN NAT64 sessions. |
| lsncurnat64sessionsrate |
|
Read-only | Rate (/s) counter for lsncurnat64sessions |
| lsnnat64cursubscribers |
|
Read-only | Current number of LSN NAT64 subscribers. |
| lsnnat64cursubscribersrate |
|
Read-only | Rate (/s) counter for lsnnat64cursubscribers |
| lsntotnat64rxpkts |
|
Read-only | Total number of LSN NAT64 rx pkts. |
| lsnnat64rxpktsrate |
|
Read-only | Rate (/s) counter for lsntotnat64rxpkts |
| lsntotnat64rxbytes |
|
Read-only | Total number of LSN NAT64 rx bytes. |
| lsnnat64rxbytesrate |
|
Read-only | Rate (/s) counter for lsntotnat64rxbytes |
| lsntotnat64txpkts |
|
Read-only | Total number of LSN NAT64 tx pkts. |
| lsnnat64txpktsrate |
|
Read-only | Rate (/s) counter for lsntotnat64txpkts |
| lsntotnat64txbytes |
|
Read-only | Total number of LSN NAT64 tx bytes. |
| lsnnat64txbytesrate |
|
Read-only | Rate (/s) counter for lsntotnat64txbytes |
| lsncurnat64tcpsessions |
|
Read-only | Number of LSN NAT64 TCP Current Sessions. |
| lsncurnat64tcpsessionsrate |
|
Read-only | Rate (/s) counter for lsncurnat64tcpsessions |
| lsntotnat64tcprxpkts |
|
Read-only | Number of LSN NAT64 TCP Received packets. |
| lsnnat64tcprxpktsrate |
|
Read-only | Rate (/s) counter for lsntotnat64tcprxpkts |
| lsntotnat64tcprxbytes |
|
Read-only | Number of LSN NAT64 TCP Received bytes. |
| lsnnat64tcprxbytesrate |
|
Read-only | Rate (/s) counter for lsntotnat64tcprxbytes |
| lsntotnat64tcptxpkts |
|
Read-only | Number of LSN NAT64 TCP Transmitted packets. |
| lsnnat64tcptxpktsrate |
|
Read-only | Rate (/s) counter for lsntotnat64tcptxpkts |
| lsntotnat64tcptxbytes |
|
Read-only | Number of LSN NAT64 TCP Transmitted bytes. |
| lsnnat64tcptxbytesrate |
|
Read-only | Rate (/s) counter for lsntotnat64tcptxbytes |
| lsntotnat64tcpdrppkts |
|
Read-only | Number of LSN NAT64 TCP Dropped packets. |
| lsnnat64tcpdrppktsrate |
|
Read-only | Rate (/s) counter for lsntotnat64tcpdrppkts |
| lsncurnat64udpsessions |
|
Read-only | Number of LSN NAT64 UDP Current Sessions. |
| lsncurnat64udpsessionsrate |
|
Read-only | Rate (/s) counter for lsncurnat64udpsessions |
| lsntotnat64udprxpkts |
|
Read-only | Number of LSN NAT64 UDP Received packets. |
| lsnnat64udprxpktsrate |
|
Read-only | Rate (/s) counter for lsntotnat64udprxpkts |
| lsntotnat64udprxbytes |
|
Read-only | Number of LSN NAT64 UDP Received bytes. |
| lsnnat64udprxbytesrate |
|
Read-only | Rate (/s) counter for lsntotnat64udprxbytes |
| lsntotnat64udptxpkts |
|
Read-only | Number of LSN NAT64 UDP Transmitted packets. |
| lsnnat64udptxpktsrate |
|
Read-only | Rate (/s) counter for lsntotnat64udptxpkts |
| lsntotnat64udptxbytes |
|
Read-only | Number of LSN NAT64 UDP Transmitted bytes. |
| lsnnat64udptxbytesrate |
|
Read-only | Rate (/s) counter for lsntotnat64udptxbytes |
| lsntotnat64udpdrppkts |
|
Read-only | Number of LSN NAT64 UDP Dropped packets. |
| lsnnat64udpdrppktsrate |
|
Read-only | Rate (/s) counter for lsntotnat64udpdrppkts |
| lsncurnat64icmpsessions |
|
Read-only | Number of LSN NAT64 ICMP Current Sessions. |
| lsncurnat64icmpsessionsrate |
|
Read-only | Rate (/s) counter for lsncurnat64icmpsessions |
| lsntotnat64icmprxpkts |
|
Read-only | Number of LSN NAT64 ICMP Received packets. |
| lsnnat64icmprxpktsrate |
|
Read-only | Rate (/s) counter for lsntotnat64icmprxpkts |
| lsntotnat64icmprxbytes |
|
Read-only | Number of LSN NAT64 ICMP Received bytes. |
| lsnnat64icmprxbytesrate |
|
Read-only | Rate (/s) counter for lsntotnat64icmprxbytes |
| lsntotnat64icmptxpkts |
|
Read-only | Number of LSN NAT64 ICMP Transmitted packets. |
| lsnnat64icmptxpktsrate |
|
Read-only | Rate (/s) counter for lsntotnat64icmptxpkts |
| lsntotnat64icmptxbytes |
|
Read-only | Number of LSN NAT64 ICMP Transmitted bytes. |
| lsnnat64icmptxbytesrate |
|
Read-only | Rate (/s) counter for lsntotnat64icmptxbytes |
| lsntotnat64icmpdrppkts |
|
Read-only | Number of LSN NAT64 ICMP Dropped packets. |
| lsnnat64icmpdrppktsrate |
|
Read-only | Rate (/s) counter for lsntotnat64icmpdrppkts |
Operations
(click to see Properties )
- GET (ALL)
Some options that you can use for each operations:
-
Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
-
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
*Note:
*
Mandatory parameters are marked in red and placeholder content is marked in green
get (all)
URL: http:// <netscaler-ip-address> /nitro/v1/stat/lsnnat64
Query-parameters:
args
http:// <netscaler-ip-address> /nitro/v1/stat/lsnnat64? args=detail: <Boolean_value> ,fullvalues: <Boolean_value> ,ntimes: <Double_value> ,logfile: <String_value> ,clearstats: <String_value>
Use this query-parameter to get lsnnat64 resources based on additional properties.
HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response:
HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "lsnnat64": [ {
"lsnnat64icmptxbytesrate":<Double_value>,
"lsntotnat64icmprxpkts":<Double_value>,
"lsnnat64tcptxpktsrate":<Double_value>,
"lsncurnat64icmpsessions":<Double_value>,
"lsnnat64rxpktsrate":<Double_value>,
"lsnnat64udptxbytesrate":<Double_value>,
"lsntotnat64udprxbytes":<Double_value>,
"lsntotnat64rxpkts":<Double_value>,
"lsnnat64txpktsrate":<Double_value>,
"lsntotnat64icmptxpkts":<Double_value>,
"lsntotnat64udpdrppkts":<Double_value>,
"lsncurnat64udpsessionsrate":<Double_value>,
"lsncurnat64tcpsessions":<Double_value>,
"lsntotnat64tcptxbytes":<Double_value>,
"lsntotnat64txbytes":<Double_value>,
"lsnnat64txbytesrate":<Double_value>,
"lsncurnat64sessions":<Double_value>,
"lsnnat64icmpdrppktsrate":<Double_value>,
"lsntotnat64udptxbytes":<Double_value>,
"lsncurnat64icmpsessionsrate":<Double_value>,
"lsnnat64tcprxpktsrate":<Double_value>,
"lsnnat64icmptxpktsrate":<Double_value>,
"lsnnat64udpdrppktsrate":<Double_value>,
"lsntotnat64txpkts":<Double_value>,
"lsncurnat64udpsessions":<Double_value>,
"lsntotnat64tcprxpkts":<Double_value>,
"lsnnat64tcpdrppktsrate":<Double_value>,
"lsnnat64tcptxbytesrate":<Double_value>,
"lsntotnat64icmptxbytes":<Double_value>,
"lsnnat64udptxpktsrate":<Double_value>,
"lsntotnat64tcptxpkts":<Double_value>,
"lsnnat64tcprxbytesrate":<Double_value>,
"lsnnat64icmprxpktsrate":<Double_value>,
"lsntotnat64udprxpkts":<Double_value>,
"lsntotnat64tcpdrppkts":<Double_value>,
"lsncurnat64tcpsessionsrate":<Double_value>,
"lsnnat64udprxpktsrate":<Double_value>,
"lsntotnat64icmpdrppkts":<Double_value>,
"lsnnat64udprxbytesrate":<Double_value>,
"lsnnat64icmprxbytesrate":<Double_value>,
"lsncurnat64sessionsrate":<Double_value>,
"lsnnat64rxbytesrate":<Double_value>,
"lsntotnat64icmprxbytes":<Double_value>,
"lsnnat64cursubscribers":<Double_value>,
"lsnnat64cursubscribersrate":<Double_value>,
"lsntotnat64udptxpkts":<Double_value>,
"lsntotnat64rxbytes":<Double_value>,
"lsntotnat64tcprxbytes":<Double_value>
}]}
<!--NeedCopy-->