lbvserver
Statistics for Load Balancing Virtual Server resource.
Properties
(click to see Operations )
Name | Data Type | Permissions | Description |
---|---|---|---|
name |
|
Read-write | Name of the virtual server. If no name is provided, statistical data of all configured virtual servers is displayed.
Minimum length = 1 |
clearstats |
|
Read-write | Clear the statsistics / counters.
Possible values = basic, full |
sortby |
|
Read-write | use this argument to sort by specific key.
Possible values = |
sortorder |
|
Read-write | use this argument to specify sort order.
Default value: SORT_DESCENDING Possible values = ascending, descending |
avgcltttlb |
|
Read-only | Average TTLB between the client and the server. TTLB is the time interval between sending the request packet to a service and receiving the ACK for response from client. |
cltresponsetimeapdex |
|
Read-only | Vserver APDEX index based on client response times. |
vsvrsurgecount |
|
Read-only | Number of requests waiting on this vserver. |
establishedconn |
|
Read-only | Number of client connections in ESTABLISHED state. |
inactsvcs |
|
Read-only | number of INACTIVE services bound to a vserver |
vslbhealth |
|
Read-only | Health of the vserver. This gives percentage of UP services bound to this vserver. |
primaryipaddress |
|
Read-only | IP address of the vserver |
primaryport |
|
Read-only | The port on which the service is running. |
type |
|
Read-only | Protocol associated with the vserver |
state |
|
Read-only | Current state of the server. There are seven possible values: UP(7), DOWN(1), UNKNOWN(2), BUSY(3), OFS(Out of Service)(4), TROFS(Transition Out of Service)(5), TROFS_DOWN(Down When going Out of Service)(8) |
actsvcs |
|
Read-only | number of ACTIVE services bound to a vserver |
cpuusagepm |
|
Read-only | Vserver CPU usage in per-mille(parts per thousand) |
tothits |
|
Read-only | Total vserver hits |
hitsrate |
|
Read-only | Rate (/s) counter for tothits |
totalrequests |
|
Read-only | Total number of requests received on this service or virtual server. (This applies to HTTP/SSL services and servers.) |
requestsrate |
|
Read-only | Rate (/s) counter for totalrequests |
totalresponses |
|
Read-only | Number of responses received on this service or virtual server. (This applies to HTTP/SSL services and servers.) |
responsesrate |
|
Read-only | Rate (/s) counter for totalresponses |
totalrequestbytes |
|
Read-only | Total number of request bytes received on this service or virtual server. |
requestbytesrate |
|
Read-only | Rate (/s) counter for totalrequestbytes |
totalresponsebytes |
|
Read-only | Number of response bytes received by this service or virtual server. |
responsebytesrate |
|
Read-only | Rate (/s) counter for totalresponsebytes |
totalh2requests |
|
Read-only | Total number of Http2 requests received on this service or virtual server. (This applies to HTTP/SSL services and servers.) |
h2requestsrate |
|
Read-only | Rate (/s) counter for totalh2requests |
totalh2responses |
|
Read-only | Number of Http2 responses received on this service or virtual server. (This applies to HTTP/SSL services and servers.) |
h2responsesrate |
|
Read-only | Rate (/s) counter for totalh2responses |
totalpktsrecvd |
|
Read-only | Total number of packets received by this service or virtual server. |
pktsrecvdrate |
|
Read-only | Rate (/s) counter for totalpktsrecvd |
totalpktssent |
|
Read-only | Total number of packets sent. |
pktssentrate |
|
Read-only | Rate (/s) counter for totalpktssent |
curclntconnections |
|
Read-only | Number of current client connections. |
cursrvrconnections |
|
Read-only | Number of current connections to the actual servers behind the virtual server. |
curpersistencesessions |
|
Read-only | current vserver owned persistence sessions |
curbackuppersistencesessions |
|
Read-only | current vserver owned backup persistence sessions |
surgecount |
|
Read-only | Number of requests in the surge queue. |
svcsurgecount |
|
Read-only | Total number of requests in the surge queues of all the services bound to this LB-vserver. |
sothreshold |
|
Read-only | Spill Over Threshold set on the VServer. |
totspillovers |
|
Read-only | Number of times vserver experienced spill over. |
labelledconn |
|
Read-only | Number of Labeled connection on this vserver |
pushlabel |
|
Read-only | Number of labels for this push vserver. |
deferredreq |
|
Read-only | Number of deferred request on this vserver |
deferredreqrate |
|
Read-only | Rate (/s) counter for deferredreq |
invalidrequestresponse |
|
Read-only | Number invalid requests/responses on this vserver |
invalidrequestresponsedropped |
|
Read-only | Number invalid requests/responses dropped on this vserver |
totvserverdownbackuphits |
|
Read-only | Number of times traffic was diverted to backup vserver since primary vserver was DOWN. |
curmptcpsessions |
|
Read-only | Current Multipath TCP sessions |
cursubflowconn |
|
Read-only | Current Multipath TCP subflows |
totalconnreassemblyqueue75 |
|
Read-only | Total no of connections with 75% TCP reassembly queue |
totalconnreassemblyqueueflush |
|
Read-only | Total no of connections incurred TCP reassembly queue flush |
totalsvrbusyerr |
|
Read-only | Total no of server busy error |
svrbusyerrrate |
|
Read-only | Rate (/s) counter for totalsvrbusyerr |
reqretrycount |
|
Read-only | Number of times request has been retried due to server failure. |
reqretrycountexceeded |
|
Read-only | Number of times Maximum retry count threshold is exceeded and error returned to client. |
httpmaxhdrszpkts |
|
Read-only | Number of http max header size packet parsing failures |
httpmaxhdrfldlenpkts |
|
Read-only | Number of HTTP requests exceeding max header field length |
tcpmaxooopkts |
|
Read-only | No of times max out of order packets reached |
totcltttlbtransactions |
|
Read-only | Total transactions where client TTLB is calculated. |
toleratingttlbtransactions |
|
Read-only | Tolerable transactions based on APDEX threshold (>T ;; <4T). |
frustratingttlbtransactions |
|
Read-only | Frustrating transactions based on APDEX threshold (>4T). |
Operations
(click to see Properties )
- GET (ALL)
- GET
Some options that you can use for each operations:
-
Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
-
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
*Note:
*
Mandatory parameters are marked in
red
and placeholder content is marked in
green
get (all)
URL: http:// <netscaler-ip-address> /nitro/v1/stat/lbvserver Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/stat/lbvserver? args=name: <String_value> ,detail: <Boolean_value> ,fullvalues: <Boolean_value> ,ntimes: <Double_value> ,logfile: <String_value> ,clearstats: <String_value> ,sortby: <String_value> ,sortorder: <String_value> ,sortorder: <String_value>
Use this query-parameter to get lbvserver resources based on additional properties.
attrs http:// <netscaler-ip-address> /nitro/v1/stat/lbvserver? attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "lbvserver": [ {
"name":<String_value>,
"curclntconnections":<Double_value>,
"establishedconn":<Double_value>,
"totalpktssent":<Double_value>,
"labelledconn":<Double_value>,
"tothits":<Double_value>,
"totalrequests":<Double_value>,
"sothreshold":<Double_value>,
"cursubflowconn":<Double_value>,
"svrbusyerrrate":<Double_value>,
"surgecount":<Double_value>,
"responsebytesrate":<Double_value>,
"invalidrequestresponsedropped":<Double_value>,
"totalresponses":<Double_value>,
"curpersistencesessions":<Double_value>,
"requestbytesrate":<Double_value>,
"totalsvrbusyerr":<Double_value>,
"avgcltttlb":<Double_value>,
"type":<String_value>,
"hitsrate":<Double_value>,
"totalconnreassemblyqueue75":<Double_value>,
"reqretrycountexceeded":<Double_value>,
"cursrvrconnections":<Double_value>,
"totalconnreassemblyqueueflush":<Double_value>,
"cltresponsetimeapdex":<Double_value>,
"totcltttlbtransactions":<Double_value>,
"cpuusagepm":<Double_value>,
"pktsrecvdrate":<Double_value>,
"primaryipaddress":<String_value>,
"vsvrsurgecount":<Double_value>,
"pushlabel":<Double_value>,
"toleratingttlbtransactions":<Double_value>,
"responsesrate":<Double_value>,
"deferredreq":<Double_value>,
"totalh2requests":<Double_value>,
"curmptcpsessions":<Double_value>,
"tcpmaxooopkts":<Double_value>,
"totspillovers":<Double_value>,
"svcsurgecount":<Double_value>,
"h2responsesrate":<Double_value>,
"totalrequestbytes":<Double_value>,
"invalidrequestresponse":<Double_value>,
"state":<String_value>,
"httpmaxhdrszpkts":<Double_value>,
"vslbhealth":<Double_value>,
"deferredreqrate":<Double_value>,
"actsvcs":<Double_value>,
"totalpktsrecvd":<Double_value>,
"curbackuppersistencesessions":<Double_value>,
"pktssentrate":<Double_value>,
"frustratingttlbtransactions":<Double_value>,
"totalresponsebytes":<Double_value>,
"totalh2responses":<Double_value>,
"primaryport":<Integer_value>,
"requestsrate":<Double_value>,
"reqretrycount":<Double_value>,
"totvserverdownbackuphits":<Double_value>,
"inactsvcs":<Double_value>,
"h2requestsrate":<Double_value>,
"httpmaxhdrfldlenpkts":<Double_value>
}]}
<!--NeedCopy-->
get
URL: http:// <netscaler-ip-address> /nitro/v1/stat/lbvserver/ name_value><String> HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "lbvserver": [ {
"name":<String_value>,
"curclntconnections":<Double_value>,
"establishedconn":<Double_value>,
"totalpktssent":<Double_value>,
"labelledconn":<Double_value>,
"tothits":<Double_value>,
"totalrequests":<Double_value>,
"sothreshold":<Double_value>,
"cursubflowconn":<Double_value>,
"svrbusyerrrate":<Double_value>,
"surgecount":<Double_value>,
"responsebytesrate":<Double_value>,
"invalidrequestresponsedropped":<Double_value>,
"totalresponses":<Double_value>,
"curpersistencesessions":<Double_value>,
"requestbytesrate":<Double_value>,
"totalsvrbusyerr":<Double_value>,
"avgcltttlb":<Double_value>,
"type":<String_value>,
"hitsrate":<Double_value>,
"totalconnreassemblyqueue75":<Double_value>,
"reqretrycountexceeded":<Double_value>,
"cursrvrconnections":<Double_value>,
"totalconnreassemblyqueueflush":<Double_value>,
"cltresponsetimeapdex":<Double_value>,
"totcltttlbtransactions":<Double_value>,
"cpuusagepm":<Double_value>,
"pktsrecvdrate":<Double_value>,
"primaryipaddress":<String_value>,
"vsvrsurgecount":<Double_value>,
"pushlabel":<Double_value>,
"toleratingttlbtransactions":<Double_value>,
"responsesrate":<Double_value>,
"deferredreq":<Double_value>,
"totalh2requests":<Double_value>,
"curmptcpsessions":<Double_value>,
"tcpmaxooopkts":<Double_value>,
"totspillovers":<Double_value>,
"svcsurgecount":<Double_value>,
"h2responsesrate":<Double_value>,
"totalrequestbytes":<Double_value>,
"invalidrequestresponse":<Double_value>,
"state":<String_value>,
"httpmaxhdrszpkts":<Double_value>,
"vslbhealth":<Double_value>,
"deferredreqrate":<Double_value>,
"actsvcs":<Double_value>,
"totalpktsrecvd":<Double_value>,
"curbackuppersistencesessions":<Double_value>,
"pktssentrate":<Double_value>,
"frustratingttlbtransactions":<Double_value>,
"totalresponsebytes":<Double_value>,
"totalh2responses":<Double_value>,
"primaryport":<Integer_value>,
"requestsrate":<Double_value>,
"reqretrycount":<Double_value>,
"totvserverdownbackuphits":<Double_value>,
"inactsvcs":<Double_value>,
"h2requestsrate":<Double_value>,
"httpmaxhdrfldlenpkts":<Double_value>
}]}
<!--NeedCopy-->