lsndslite
Read/write properties
Properties
(click to see Operations )
| Name | Data Type | Permissions | Description |
|---|---|---|---|
| clearstats |
|
Read-write | Clear the statsistics / counters.
Possible values = basic, full |
| lsntotdsliterxpkts |
|
Read-only | Total number of LSN DS-Lite rx pkts. |
| lsndsliterxpktsrate |
|
Read-only | Rate (/s) counter for lsntotdsliterxpkts |
| lsntotdsliterxbytes |
|
Read-only | Total number of LSN DS-Lite rx bytes. |
| lsndsliterxbytesrate |
|
Read-only | Rate (/s) counter for lsntotdsliterxbytes |
| lsntotdslitetxpkts |
|
Read-only | Total number of LSN DS-Lite tx pkts. |
| lsndslitetxpktsrate |
|
Read-only | Rate (/s) counter for lsntotdslitetxpkts |
| lsntotdslitetxbytes |
|
Read-only | Total number of LSN DS-Lite tx bytes. |
| lsndslitetxbytesrate |
|
Read-only | Rate (/s) counter for lsntotdslitetxbytes |
| lsntotdslitetcprxpkts |
|
Read-only | Number of LSN DS-Lite TCP Received packets. |
| lsndslitetcprxpktsrate |
|
Read-only | Rate (/s) counter for lsntotdslitetcprxpkts |
| lsntotdslitetcprxbytes |
|
Read-only | Number of LSN DS-Lite TCP Received bytes. |
| lsndslitetcprxbytesrate |
|
Read-only | Rate (/s) counter for lsntotdslitetcprxbytes |
| lsntotdslitetcptxpkts |
|
Read-only | Number of LSN DS-Lite TCP Transmitted packets. |
| lsndslitetcptxpktsrate |
|
Read-only | Rate (/s) counter for lsntotdslitetcptxpkts |
| lsntotdslitetcptxbytes |
|
Read-only | Number of LSN DS-Lite TCP Transmitted bytes. |
| lsndslitetcptxbytesrate |
|
Read-only | Rate (/s) counter for lsntotdslitetcptxbytes |
| lsntotdslitetcpdrppkts |
|
Read-only | Number of LSN DS-Lite TCP Dropped packets. |
| lsndslitetcpdrppktsrate |
|
Read-only | Rate (/s) counter for lsntotdslitetcpdrppkts |
| lsncurdslitetcpsessions |
|
Read-only | Number of LSN DS-Lite TCP Current Sessions. |
| lsncurdslitetcpsessionsrate |
|
Read-only | Rate (/s) counter for lsncurdslitetcpsessions |
| lsntotdsliteudprxpkts |
|
Read-only | Number of LSN DS-Lite UDP Received packets. |
| lsndsliteudprxpktsrate |
|
Read-only | Rate (/s) counter for lsntotdsliteudprxpkts |
| lsntotdsliteudprxbytes |
|
Read-only | Number of LSN DS-Lite UDP Received bytes. |
| lsndsliteudprxbytesrate |
|
Read-only | Rate (/s) counter for lsntotdsliteudprxbytes |
| lsntotdsliteudptxpkts |
|
Read-only | Number of LSN DS-Lite UDP Transmitted packets. |
| lsndsliteudptxpktsrate |
|
Read-only | Rate (/s) counter for lsntotdsliteudptxpkts |
| lsntotdsliteudptxbytes |
|
Read-only | Number of LSN DS-Lite UDP Transmitted bytes. |
| lsndsliteudptxbytesrate |
|
Read-only | Rate (/s) counter for lsntotdsliteudptxbytes |
| lsntotdsliteudpdrppkts |
|
Read-only | Number of LSN DS-Lite UDP Dropped packets. |
| lsndsliteudpdrppktsrate |
|
Read-only | Rate (/s) counter for lsntotdsliteudpdrppkts |
| lsncurdsliteudpsessions |
|
Read-only | Number of LSN DS-Lite UDP Current Sessions. |
| lsncurdsliteudpsessionsrate |
|
Read-only | Rate (/s) counter for lsncurdsliteudpsessions |
| lsntotdsliteicmprxpkts |
|
Read-only | Number of LSN DS-Lite ICMP Received packets. |
| lsndsliteicmprxpktsrate |
|
Read-only | Rate (/s) counter for lsntotdsliteicmprxpkts |
| lsntotdsliteicmprxbytes |
|
Read-only | Number of LSN DS-Lite ICMP Received bytes. |
| lsndsliteicmprxbytesrate |
|
Read-only | Rate (/s) counter for lsntotdsliteicmprxbytes |
| lsntotdsliteicmptxpkts |
|
Read-only | Number of LSN DS-Lite ICMP Transmitted packets. |
| lsndsliteicmptxpktsrate |
|
Read-only | Rate (/s) counter for lsntotdsliteicmptxpkts |
| lsntotdsliteicmptxbytes |
|
Read-only | Number of LSN DS-Lite ICMP Transmitted bytes. |
| lsndsliteicmptxbytesrate |
|
Read-only | Rate (/s) counter for lsntotdsliteicmptxbytes |
| lsntotdsliteicmpdrppkts |
|
Read-only | Number of LSN DS-Lite ICMP Dropped packets. |
| lsndsliteicmpdrppktsrate |
|
Read-only | Rate (/s) counter for lsntotdsliteicmpdrppkts |
| lsncurdsliteicmpsessions |
|
Read-only | Number of LSN DS-Lite ICMP Current Sessions. |
| lsncurdsliteicmpsessionsrate |
|
Read-only | Rate (/s) counter for lsncurdsliteicmpsessions |
| lsncurdslitesessions |
|
Read-only | Current number of LSN DS-Lite sessions. |
| lsncurdslitesessionsrate |
|
Read-only | Rate (/s) counter for lsncurdslitesessions |
| lsndslitecursubscribers |
|
Read-only | Current number of LSN DS-Lite subscribers. |
| lsndslitecursubscribersrate |
|
Read-only | Rate (/s) counter for lsndslitecursubscribers |
Operations
(click to see Properties )
- GET (ALL)
Some options that you can use for each operations:
-
Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
-
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
*Note:
*
Mandatory parameters are marked in
red
and placeholder content is marked in
green
get (all)
URL: http:// <netscaler-ip-address> /nitro/v1/stat/lsndslite Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/stat/lsndslite? args=detail: <Boolean_value> ,fullvalues: <Boolean_value> ,ntimes: <Double_value> ,logfile: <String_value> ,clearstats: <String_value>
Use this query-parameter to get lsndslite resources based on additional properties.
attrs http:// <netscaler-ip-address> /nitro/v1/stat/lsndslite? attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response: HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "lsndslite": [ {
"lsntotdsliteudpdrppkts":<Double_value>,
"lsndsliteudprxpktsrate":<Double_value>,
"lsntotdsliterxpkts":<Double_value>,
"lsntotdslitetxbytes":<Double_value>,
"lsncurdsliteicmpsessionsrate":<Double_value>,
"lsntotdsliteudptxbytes":<Double_value>,
"lsntotdsliteicmptxpkts":<Double_value>,
"lsndslitetxpktsrate":<Double_value>,
"lsntotdsliteicmptxbytes":<Double_value>,
"lsntotdsliterxbytes":<Double_value>,
"lsntotdsliteicmpdrppkts":<Double_value>,
"lsncurdslitetcpsessionsrate":<Double_value>,
"lsndsliteudptxbytesrate":<Double_value>,
"lsntotdsliteudprxbytes":<Double_value>,
"lsndsliterxbytesrate":<Double_value>,
"lsncurdsliteicmpsessions":<Double_value>,
"lsndsliteicmprxbytesrate":<Double_value>,
"lsndsliteudpdrppktsrate":<Double_value>,
"lsntotdslitetcpdrppkts":<Double_value>,
"lsntotdsliteicmprxbytes":<Double_value>,
"lsncurdslitesessionsrate":<Double_value>,
"lsntotdsliteicmprxpkts":<Double_value>,
"lsntotdslitetxpkts":<Double_value>,
"lsncurdsliteudpsessionsrate":<Double_value>,
"lsndslitetcptxpktsrate":<Double_value>,
"lsntotdslitetcptxpkts":<Double_value>,
"lsndsliteicmptxpktsrate":<Double_value>,
"lsndsliteicmpdrppktsrate":<Double_value>,
"lsntotdsliteudprxpkts":<Double_value>,
"lsncurdslitetcpsessions":<Double_value>,
"lsndslitetxbytesrate":<Double_value>,
"lsntotdslitetcprxbytes":<Double_value>,
"lsndsliteicmptxbytesrate":<Double_value>,
"lsndsliteicmprxpktsrate":<Double_value>,
"lsncurdslitesessions":<Double_value>,
"lsndslitetcprxbytesrate":<Double_value>,
"lsndslitecursubscribers":<Double_value>,
"lsntotdslitetcprxpkts":<Double_value>,
"lsndsliterxpktsrate":<Double_value>,
"lsncurdsliteudpsessions":<Double_value>,
"lsndslitetcprxpktsrate":<Double_value>,
"lsntotdsliteudptxpkts":<Double_value>,
"lsntotdslitetcptxbytes":<Double_value>,
"lsndslitetcpdrppktsrate":<Double_value>,
"lsndslitetcptxbytesrate":<Double_value>,
"lsndsliteudprxbytesrate":<Double_value>,
"lsndsliteudptxpktsrate":<Double_value>,
"lsndslitecursubscribersrate":<Double_value>
}]}
<!--NeedCopy-->