NetScaler SDX 14.1 NITRO API Reference

snmp_user

Configuration for SNMP User resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
security_level Read-write Security Level of SNMP User. Values: 0: noAuthNoPriv, 1: authNoPriv, 2: authPriv.

Maximum value =
auth_password Read-write Authentication Password of SNMP User.

Minimum length = 8

Maximum length = 32
privacy_protocol Read-write Privacy Protocol of SNMP User. Values: 0:noValue, 1: DES, 2: AES.

Maximum value =
name Read-write Name of SNMP User.

Minimum length = 1

Maximum length = 32
privacy_password Read-write Privacy Password of SNMP User.

Minimum length = 8

Maximum length = 32
view_name Read-write SNMP View Name attached to the SNMP User.

Maximum length = 32
auth_protocol Read-write Authentication Protocol of SNMP User. Values: 0:noValue, 1: MD5, 2: SHA1.

Maximum value =

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET (ALL)
  • GET
  • UPDATE

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

The following parameters can be used in the nitro request : onerror <String_value>

Use this parameter to set the onerror status for nitro request. Applicable only for bulk requests.

Default value: EXIT

Possible values = EXIT, CONTINUE

add

URL: https://<MGMT-IP>/nitro/v2/config/snmp_user?onerror=<String_value> HTTPS Method: POST

Request Headers: Content-Type: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Request Payload:

{"snmp_user": {
<b>"security_level":<Integer_value></b>,
<b>"name":<String_value></b>,
"privacy_password":<String_value>,
"auth_protocol":<Integer_value>,
"view_name":<String_value>,
"auth_password":<String_value>,
"privacy_protocol":<Integer_value>}}

<!--NeedCopy-->

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "snmp_user":[{
"security_level":<Integer_value>,
"auth_password":<String_value>,
"privacy_protocol":<Integer_value>,
"name":<String_value>,
"privacy_password":<String_value>,
"view_name":<String_value>,
"auth_protocol":<Integer_value>,
"security_level_str":<String_value>,
"privacy_protocol_str":<String_value>,
"auth_protocol_str":<String_value>}]}

<!--NeedCopy-->

delete

URL: https://<MGMT-IP>/nitro/v2/config/snmp_user/name_value<String> HTTPS Method: DELETE

Request Headers: X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt }

<!--NeedCopy-->

get (all)

URL: https://<MGMT-IP>/nitro/v2/config/snmp_user Query-parameters:

filter https://<MGMT-IP>/nitro/v2/config/snmp_user ?filter=property-name1:property-value1,property-name2:property-value2 Use this query-parameter to get the filtered set of snmp_user resources configured on the system. You can set a filter on any property of the resource.

pagesize=#no;pageno=#no https://<MGMT-IP>/nitro/v2/config/snmp_user ?pagesize=#no;pageno=#no Use this query-parameter to get the snmp_user resources in chunks.

count https://<MGMT-IP>/nitro/v2/config/snmp_user ?count=yes Use this query-parameter to get the count of snmp_user resources.

HTTPS Method: GET

Request Headers: Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "snmp_user":[{
"security_level":<Integer_value>,
"auth_password":<String_value>,
"privacy_protocol":<Integer_value>,
"name":<String_value>,
"privacy_password":<String_value>,
"view_name":<String_value>,
"auth_protocol":<Integer_value>,
"security_level_str":<String_value>,
"privacy_protocol_str":<String_value>,
"auth_protocol_str":<String_value>}]}

<!--NeedCopy-->

get

URL: https://<MGMT-IP>/nitro/v2/config/snmp_user/name_value<String> HTTPS Method: GET

Request Headers: Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "snmp_user":[{
"security_level":<Integer_value>,
"auth_password":<String_value>,
"privacy_protocol":<Integer_value>,
"name":<String_value>,
"privacy_password":<String_value>,
"view_name":<String_value>,
"auth_protocol":<Integer_value>,
"security_level_str":<String_value>,
"privacy_protocol_str":<String_value>,
"auth_protocol_str":<String_value>}]}

<!--NeedCopy-->

update

URL: https://<MGMT-IP>/nitro/v2/config/snmp_user/name_value<String> HTTPS Method: PUT

Request Headers: Content-Type: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Request Payload:

{"snmp_user":{
<b>"security_level":<Integer_value></b>,
<b>"name":<String_value></b>,
"privacy_password":<String_value>,
"auth_protocol":<Integer_value>,
"view_name":<String_value>,
"auth_password":<String_value>,
"privacy_protocol":<Integer_value>}}

<!--NeedCopy-->

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "snmp_user":[{
"security_level":<Integer_value>,
"auth_password":<String_value>,
"privacy_protocol":<Integer_value>,
"name":<String_value>,
"privacy_password":<String_value>,
"view_name":<String_value>,
"auth_protocol":<Integer_value>,
"security_level_str":<String_value>,
"privacy_protocol_str":<String_value>,
"auth_protocol_str":<String_value>}]}

<!--NeedCopy-->
snmp_user