ADC CLI Commands

ns-dhcpParams

The following operations can be performed on “ns-dhcpParams”:

show unset set

show ns dhcpParams

Displays the parameters configured for the DHCP client.

Synopsis

show ns dhcpParams

Arguments

Output

dhcpClient ON, if DHCP client active on next reboot, else OFF

IPAddress DHCP acquired IP

netmask DHCP acquired Netmask

hostRtGw DHCP acquired Gateway

running DHCP mode

saveroute DHCP acquired gateway save flag

unset ns dhcpParams

Use this command to remove ns dhcpParams settings.Refer to the set ns dhcpParams command for meanings of the arguments.

Synopsis

unset ns dhcpParams [-dhcpClient] [-saveroute]

set ns dhcpParams

Sets the DHCP client parameters.

Synopsis

set ns dhcpParams [-dhcpClient ( ON OFF )] [-saveroute ( ON OFF )]

Arguments

dhcpClient Enables DHCP client to acquire IP address from the DHCP server in the next boot. When set to OFF, disables the DHCP client in the next boot.

Possible values: ON, OFF Default value: OFF

saveroute DHCP acquired routes are saved on the Citrix ADC.

Possible values: ON, OFF Default value: OFF

ns-dhcpParams