ADM NITRO APIs

device_event_summary

Configuration for devices events summary resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
id Read-write Id is system generated key.
device_ip_address Read-write ip_address of the device..
instance_id Read-write Instance ID of the managed device..

Minimum length = 1

Maximum length = 256
type Read-write Device Family.

Minimum length = 1

Maximum length = 64
hostname Read-write Assign hostname to managed device, if this is not provided, name will be set as host name .

Minimum length = 1

Maximum length = 256
total_critical_events Read-only Total number of Critical events city wise..
total_major_events Read-only Total number of major events city wise..
total_events Read-only Total number of events.
instance_state Read-only State of device, UP only if device accessible.

Operations

(click to see Properties )

  • GET (ALL)
  • GET

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

The following parameters can be used in the nitro request : onerror <String_value>

Use this parameter to set the onerror status for nitro request. Applicable only for bulk requests.

Default value: EXIT

Possible values = EXIT, CONTINUE

get (all)

URL: https://<MGMT-IP>/nitro/v2/config/device_event_summary Query-parameters:

filter https://<MGMT-IP>/nitro/v2/config/device_event_summary ?filter=property-name1:property-value1,property-name2:property-value2 Use this query-parameter to get the filtered set of device_event_summary resources configured on the system. You can set a filter on any property of the resource.

pagesize=#no;pageno=#no https://<MGMT-IP>/nitro/v2/config/device_event_summary ?pagesize=#no;pageno=#no Use this query-parameter to get the device_event_summary resources in chunks.

count https://<MGMT-IP>/nitro/v2/config/device_event_summary ?count=yes Use this query-parameter to get the count of device_event_summary resources.

HTTPS Method: GET

Request Headers: Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "device_event_summary":[{
"total_critical_events":<Integer_value>,
"total_major_events":<Integer_value>,
"id":<String_value>,
"device_ip_address":<String_value>,
"instance_id":<String_value>,
"total_events":<Integer_value>,
"type":<String_value>,
"hostname":<String_value>,
"instance_state":<String_value>}]}

<!--NeedCopy-->

get

URL: https://<MGMT-IP>/nitro/v2/config/device_event_summary/id_value<String> HTTPS Method: GET

Request Headers: Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "device_event_summary":[{
"total_critical_events":<Integer_value>,
"total_major_events":<Integer_value>,
"id":<String_value>,
"device_ip_address":<String_value>,
"instance_id":<String_value>,
"total_events":<Integer_value>,
"type":<String_value>,
"hostname":<String_value>,
"instance_state":<String_value>}]}

<!--NeedCopy-->
device_event_summary