Developer Documentation
ADM NITRO APIs

perf_ssl_backend_ciphers_report

June 20, 2023
Contributed by: 
C

Configuration for SSL Back-end Ciphers report resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
sslbkendcipheraes256rate Read-write sslbkendcipheraes256rate Value .
sslbe40bitdesciphersrate Read-write sslbe40bitdesciphersrate Value .
sslbe56bitdesciphersrate Read-write sslbe56bitdesciphersrate Value .
sslbe168bit3desciphersrate Read-write sslbe168bit3desciphersrate Value .
sslbe40bitrc2ciphersrate Read-write sslbe40bitrc2ciphersrate Value .
timestamp Read-write timestamp in milliseconds.
id Read-write Id is system generated key for all the entries in this perf table configuration.

Maximum length = 256
sslbe128bitrc4ciphersrate Read-write sslbe128bitrc4ciphersrate Value .
agg_level Read-write whether the row is Aggregated for Avg, Min, Max etc.
sslbenullciphersrate Read-write sslbenullciphersrate Value .
sslbe64bitrc4ciphersrate Read-write sslbe64bitrc4ciphersrate Value .
sslbe56bitrc2ciphersrate Read-write sslbe56bitrc2ciphersrate Value .
sslbe40bitrc4ciphersrate Read-write sslbe40bitrc4ciphersrate Value.
report_level Read-write whether the row is for minutely, hourly etc.
device_ip_address Read-write Device IP Address.

Minimum length = 1

Maximum length = 64
sslbe128bitrc2ciphersrate Read-write sslbe128bitrc2ciphersrate Value .
sslbkendcipheraes128rate Read-write sslbkendcipheraes128rate Value .
sslbe56bitrc4ciphersrate Read-write sslbe56bitrc4ciphersrate Value .
report_start_time Read-write report_start_time in seconds.
report_end_time Read-write report_end_time in seconds.

Operations

(click to see Properties )

  • GET

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

The following parameters can be used in the nitro request : onerror <String_value>

Use this parameter to set the onerror status for nitro request. Applicable only for bulk requests.

Default value: EXIT

Possible values = EXIT, CONTINUE

get

URL: https://<MGMT-IP>/nitro/v2/config/perf_ssl_backend_ciphers_report HTTPS Method: GET

Request Headers: Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload: 

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "perf_ssl_backend_ciphers_report":[{
"sslbkendcipheraes256rate":<Double_value>,
"sslbe40bitdesciphersrate":<Double_value>,
"sslbe56bitdesciphersrate":<Double_value>,
"sslbe168bit3desciphersrate":<Double_value>,
"sslbe40bitrc2ciphersrate":<Double_value>,
"timestamp":<Double_value>,
"id":<String_value>,
"sslbe128bitrc4ciphersrate":<Double_value>,
"agg_level":<Integer_value>,
"sslbenullciphersrate":<Double_value>,
"sslbe64bitrc4ciphersrate":<Double_value>,
"sslbe56bitrc2ciphersrate":<Double_value>,
"sslbe40bitrc4ciphersrate":<Double_value>,
"report_level":<Integer_value>,
"device_ip_address":<String_value>,
"sslbe128bitrc2ciphersrate":<Double_value>,
"sslbkendcipheraes128rate":<Double_value>,
"sslbe56bitrc4ciphersrate":<Double_value>,
"report_start_time":<Double_value>,
"report_end_time":<Double_value>}]}

<!--NeedCopy-->
perf_ssl_backend_ciphers_report
June 20, 2023
Contributed by: 
C
June 20, 2023
Contributed by: 
C

In this article

Site feedback | Your privacy choices footer linkYour Privacy Choices | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
© 1999- Cloud Software Group, Inc. All rights reserved.