ipsec-parameter

Last published : Oct 30, 2026
The following operations can be performed on "ipsec-parameter":

show ipsec parameter

Show global parameters for IPSEC

Synopsis

show ipsec parameter

Arguments

Output

ikeVersion IKE Protocol Version
encAlgo Type of encryption algorithm (Note: Selection of AES enables AES128)
hashAlgo Type of hashing algorithm
lifetime Lifetime of IKE SA in seconds. Lifetime of IPSec SA will be (lifetime of IKE SA/8)
livenessCheckInterval Number of seconds after which a notify payload is sent to check the liveliness of the peer. Additional retries are done as per retransmit interval setting. Zero value disables liveliness checks.
replayWindowSize IPSec Replay window size for the data traffic
ikeRetryInterval IKE retry interval for bringing up the connection
perfectForwardSecrecy Enable/Disable PFS.
responderOnly Responder Only config for IKED.
retransmissiontime The interval in seconds to retry sending the IKE messages to peer, three consecutive attempts are done with doubled interval after every failure, increases for every retransmit till 6 retransmits.

set ipsec parameter

Set global parameters for IPSEC

Synopsis

set ipsec parameter

Arguments

ikeVersion IKE Protocol Version
Possible values: V1, V2 Default value: V2
encAlgo Type of encryption algorithm (Note: Selection of AES enables AES128) Default value: AES
hashAlgo Type of hashing algorithm Default value: HMAC_SHA256
lifetime Lifetime of IKE SA in seconds. Lifetime of IPSec SA will be (lifetime of IKE SA/8) Minimum value: 480 Maximum value: 31536000
livenessCheckInterval Number of seconds after which a notify payload is sent to check the liveliness of the peer. Additional retries are done as per retransmit interval setting. Zero value disables liveliness checks. Minimum value: 0 Maximum value: 64999
replayWindowSize IPSec Replay window size for the data traffic Minimum value: 0 Maximum value: 16384
ikeRetryInterval IKE retry interval for bringing up the connection Minimum value: 60 Maximum value: 3600
perfectForwardSecrecy Enable/Disable PFS.
Possible values: ENABLE, DISABLE Default value: DISABLE
retransmissiontime The interval in seconds to retry sending the IKE messages to peer, three consecutive attempts are done with doubled interval after every failure, increases for every retransmit till 6 retransmits. Minimum value: 1 Maximum value: 99

unset ipsec parameter

Set global parameters for IPSEC.Refer to the set ipsec parameter command for meanings of the arguments.

Synopsis

unset ipsec parameter