subscriber-profile
The following operations can be performed on "subscriber-profile":
unset subscriber profile
Use this command to remove subscriber profile settings.Refer to the set subscriber profile command for meanings of the arguments.
add subscriber profile
Creates a static subscriber profile for mobile subscribers. When traffic passes through Citrix ADC, Citrix ADC can identify the subscribers for this traffic and Subscriber based policy expressions could be configured to enable subscriber aware traffic processing.
Arguments
ip Subscriber ip address
vlan The vlan number on which the subscriber is located. Default value: 0 Minimum value: 0 Maximum value: 4096
subscriberRules Rules configured for this subscriber. This is similar to rules received from PCRF for dynamic subscriber sessions.
subscriptionIdType Subscription-Id type
Possible values: E164, IMSI, SIP_URI, NAI, PRIVATE
subscriptionIdvalue Subscription-Id value
servicePath Name of the servicepath to be taken for this subscriber.
Example
add subscriber profile 10.102.217.4 -subscriberRules rule1 rule2
rm subscriber profile
Deletes a static subscriber
Arguments
ip Subscriber ip address
vlan The vlan number on which the subscriber is located. Default value: 0 Minimum value: 0 Maximum value: 4096
Example
rm subscriber profile 10.102.217.4
set subscriber profile
Modifies a static subscriber
Arguments
ip Subscriber ip address
vlan The vlan number on which the subscriber is located. Default value: 0 Minimum value: 0 Maximum value: 4096
subscriberRules Rules configured for this subscriber. This is similar to rules received from PCRF for dynamic subscriber sessions.
subscriptionIdType Subscription-Id type
Possible values: E164, IMSI, SIP_URI, NAI, PRIVATE
subscriptionIdvalue Subscription-Id value
servicePath Name of the servicepath to be taken for this subscriber.
Example
set subscriber profile 10.102.217.4 -subscriberRules rule1 rule2
show subscriber profile
show command of a static subscriber
Arguments
ip Subscriber ip address
vlan The vlan number on which the subscriber is located. Default value: 0 Minimum value: 0 Maximum value: 4096
Output
subscriptionIdType Subscription-Id type
subscriptionIdvalue Subscription-Id value
subscriberRules Rules configured for this subscriber. This is similar to rules received from PCRF for dynamic subscriber sessions.
stateflag Flags controlling the display.
flags Subscriber Session flags
TTL Subscriber Session TTL
avpdisplaybuffer Subscriber Attributes Display
servicePath Name of the servicepath to be taken for this subscriber.
devno count
Example
show subscriber profile 10.102.217.4