netProfile
The following operations can be performed on "netProfile":
set netProfile
Modifies the srcIP parameter of a net profile.
Arguments
name Name of the net profile whose parameter you want to modify.
srcIP IP address or the name of an IP set.
srcippersistency When the net profile is associated with a virtual server or its bound services, this option enables the Citrix ADC to use the same address, specified in the net profile, to communicate to servers for all sessions initiated from a particular client to the virtual server.
Possible values: ENABLED, DISABLED Default value: DISABLED
overrideLsn USNIP/USIP settings override LSN settings for configured service/virtual server traffic..
Possible values: ENABLED, DISABLED Default value: DISABLED
MBF Response will be sent using learnt info if enabled. When creating a netprofile, if you do not set this parameter, the netprofile inherits the global MBF setting (available in the enable ns mode and disable ns mode CLI commands, or in the System > Settings > Configure modes > Configure Modes dialog box). However, you can override this setting after you create the netprofile
Possible values: ENABLED, DISABLED
Example
set netProfile prof_1 -srcIP 10.102.1.10
unset netProfile
Removes the srcIP attribute of a net profile..Refer to the set netProfile command for meanings of the arguments.
Example
unset netProfile prof1 -srcIP
bind netProfile
Binds specified port range to a netprofile.
Arguments
name Name of the netprofile to which to bind port ranges.
srcPortRange When the source port range is configured and associated with the netprofile bound to a service group, Citrix ADC will choose a port from the range configured for connection establishment at the backend servers. Minimum value: 1024 Maximum value: 65535
natRule When Natrule is configured and netprofile is bound to lb vserver, Citrix ADC will use the prefix of rewrite IP for outgoing packets if prefix of source IP of incoming packet matches with prefix of IP of natrule. This will take preference over USIP and USNIP configuration. ip_addr : IP for which prefix need to rewritten. netmask : Netmask for NatRule IP and RewriteIP. rewriteIp : Prefix for modified IP.
netmask rewriteIp
Example
bind netprofile npf_1 -srcportrange 2000-3000 bind netprofile npf_1 -natRule 10.0.0.0 255.0.0.0 11.0.0.0
add netProfile
Creates a net profile. A net profile (or network profile) contains an IP address or an IP set. During communication with physical servers or peers, the Citrix ADC uses the addresses specified in the profile as the source IP address.
Arguments
name Name for the net profile. Must begin with a letter, number, or the underscore character (_), and can consist of letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore characters. Cannot be changed after the profile is created. Choose a name that helps identify the net profile.
td Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. Minimum value: 0 Maximum value: 4094
srcIP IP address or the name of an IP set.
srcippersistency When the net profile is associated with a virtual server or its bound services, this option enables the Citrix ADC to use the same address, specified in the net profile, to communicate to servers for all sessions initiated from a particular client to the virtual server.
Possible values: ENABLED, DISABLED Default value: DISABLED
overrideLsn USNIP/USIP settings override LSN settings for configured service/virtual server traffic..
Possible values: ENABLED, DISABLED Default value: DISABLED
MBF Response will be sent using learnt info if enabled. When creating a netprofile, if you do not set this parameter, the netprofile inherits the global MBF setting (available in the enable ns mode and disable ns mode CLI commands, or in the System > Settings > Configure modes > Configure Modes dialog box). However, you can override this setting after you create the netprofile
Possible values: ENABLED, DISABLED
Example
add netProfile prof1 -srcip 10.102.1.10
rm netProfile
Removes a net profile from the Citrix ADC.
Synopsis
rm netProfile <name> ...
Arguments
name Name of the net profile to be removed.
Example
rm netProfile prof1
show netProfile
Displays the settings of all net profiles configured on the Citrix ADC, or of the specified net profile.
Arguments
name Name of the net profile whose details you want to display.
Output
srcIP Source IPaddress or IPSET name.
td Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.
srcippersistency When the net profile is associated with a virtual server or its bound services, this option enables the Citrix ADC to use the same address, specified in the net profile, to communicate to servers for all sessions initiated from a particular client to the virtual server.
netprofRefcount Used to keep reference count of IP
overrideLsn USNIP/USIP settings override LSN settings for configured service/virtual server traffic..
srcPortRange When the source port range is configured and associated with the netprofile bound to a service group, Citrix ADC will choose a port from the range configured for connection establishment at the backend servers.
stateflag state flag
flags natRule IPv4 network address on whose traffic you want the Citrix ADC to do rewrite ip prefix.
netmask rewriteIp MBF Response will be sent using learnt info if enabled. When creating a netprofile, if you do not set this parameter, the netprofile inherits the global MBF setting (available in the enable ns mode and disable ns mode CLI commands, or in the System > Settings > Configure modes > Configure Modes dialog box). However, you can override this setting after you create the netprofile
devno count
Example
show netProfile
unbind netProfile
Unbinds the specified port range from a netprofile.
Arguments
name Name of the netprofile to which to bind port ranges.
srcPortRange When the source port range is configured and associated with the netprofile bound to a service group, Citrix ADC will choose a port from the range configured for connection establishment at the backend servers. Minimum value: 1024 Maximum value: 65535
natRule Unbind the already bound natrule from netProfile.
netmask
Example
unbind netprofile npf_1 -srcportrange 2000-3000 unbind netprofile npf_1 -natrule 1.0.0.0 255.0.0.0