lb-wlm

Last published : Oct 30, 2026
The following operations can be performed on "lb-wlm":
unset| rm| unbind| add| bind| show| set|

unset lb wlm

Use this command to remove lb wlm settings.Refer to the set lb wlm command for meanings of the arguments.NOTE: This command is deprecated.

Synopsis

rm lb wlm

Removes a Work Load Manager. NOTE: This command is deprecated.WLM feature has been deprecated from Kos onwards as classic build is not supported.

Synopsis

Arguments

wlmName The name of the Work Load Manager to be removed.

Example

rm lb wlm ibm_wlm

unbind lb wlm

Unbind a vserver from Work Load Manager. NOTE: This command is deprecated.WLM feature has been deprecated from Kos onwards as classic build is not supported.

Synopsis

Arguments

wlmName The name of the Work Load Manager.
vServerName Name of the virtual server which is to be unbound from the WLM.

Example

unbind lb wlm ibm_wlm http_vip To unbind multiple vservers from Work Load Manager use the following command: unbind lb wlm ibm_wlm http_vip

add lb wlm

Add a Work Load Manager. NOTE: This command is deprecated.WLM feature has been deprecated from Kos onwards as classic build is not supported.

Synopsis

Arguments

wlmName The name of the Work Load Manager.
IPAddress The IP address of the WLM.
port The port of the WLM.
LBUID The LBUID for the Load Balancer to communicate to the Work Load Manager.
KATimeout The idle time period after which Citrix ADC would probe the WLM. The value ranges from 1 to 1440 minutes. Default value: 2 Maximum value: 1440

Example

add lb wlm ibm_wlm 10.102.1.10 3060

bind lb wlm

Bind a vserver to Work Load Manager. NOTE: This command is deprecated.WLM feature has been deprecated from Kos onwards as classic build is not supported.

Synopsis

Arguments

wlmName The name of the Work Load Manager.
vServerName Name of the virtual server which is to be bound to the WLM.

Example

bind lb wlm ibm_wlm http_vip To bind multiple vservers to workload manager use the following command: bind lb wlm ibm_wlm http_vip

show lb wlm

show Work Load Manager details NOTE: This command is deprecated.WLM feature has been deprecated from Kos onwards as classic build is not supported.

Synopsis

Arguments

wlmName The name of the work load manager.

Output

IPAddress The IP address of the WLM.
port A port number for the virtual server.
stateflag secure Use this parameter to enable secure mode of communication with WLM.
KATimeout The idle time period after which Citrix ADC would probe the WLM. The value ranges from 1 to 1440 minutes.
LBUID The LBUID for the Load Balancer to communicate to the Work Load Manager.
state State of the WLM.
vServerName Name of the virtual server which is to be bound to the WLM.
devno count

Example

show lb wlm ibm_wlm

set lb wlm

set Work Load Manager attributes NOTE: This command is deprecated.

Synopsis

Arguments

wlmName The name of the work load manager.
KATimeout The idle time period after which Citrix ADC would probe the WLM. The value ranges from 1 to 1440 minutes. Default value: 2 Maximum value: 1440

Example

set lb wlm ibm_wlm -ka_timeout 6