ADM NITRO APIs

command_execution_profile

June 20, 2023

Contributed by:

Configuration for Command Execution Profile for Event Rule resource.

Properties

(click to see Operations )

Name	Permissions	Description
append_errors	Read-write	Errors to be appended.
id	Read-write	Id is system generated key for all the run command profile..
append_output	Read-write	Output to be appended.
command_text	Read-write	Run Command Text. Minimum length = 1 Maximum length = 128
profile_name	Read-write	Profile name for the run command setting.. Minimum length = 1 Maximum length = 128

Operations

(click to see Properties )

ADD
DELETE
GET (ALL)
GET
UPDATE

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:* Mandatory parameters are marked in red and placeholder content is marked in green

The following parameters can be used in the nitro request : onerror <String_value>

Use this parameter to set the onerror status for nitro request. Applicable only for bulk requests.

Default value: EXIT

Possible values = EXIT, CONTINUE

add

URL: https://<MGMT-IP>/nitro/v2/config/command_execution_profile?onerror=<String_value> HTTPS Method: POST

Request Headers: Content-Type: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Request Payload:

{"command_execution_profile": {
<b>"command_text":<String_value></b>,
<b>"profile_name":<String_value></b>,
"append_output":<Boolean_value>,
"id":<String_value>,
"append_errors":<Boolean_value>}}

<!--NeedCopy-->

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "command_execution_profile":[{
"tenant_id":<String_value>,
"append_errors":<Boolean_value>,
"id":<String_value>,
"append_output":<Boolean_value>,
"command_text":<String_value>,
"profile_name":<String_value>}]}

<!--NeedCopy-->

delete

URL: https://<MGMT-IP>/nitro/v2/config/command_execution_profile/id_value<String> HTTPS Method: DELETE

Request Headers: X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt }

<!--NeedCopy-->

get (all)

URL: https://<MGMT-IP>/nitro/v2/config/command_execution_profile Query-parameters:

filter https://<MGMT-IP>/nitro/v2/config/command_execution_profile ?filter=property-name1:property-value1,property-name2:property-value2 Use this query-parameter to get the filtered set of command_execution_profile resources configured on the system. You can set a filter on any property of the resource.

pagesize=#no;pageno=#no https://<MGMT-IP>/nitro/v2/config/command_execution_profile ?pagesize=#no;pageno=#no Use this query-parameter to get the command_execution_profile resources in chunks.

count https://<MGMT-IP>/nitro/v2/config/command_execution_profile ?count=yes Use this query-parameter to get the count of command_execution_profile resources.

HTTPS Method: GET

Request Headers: Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "command_execution_profile":[{
"tenant_id":<String_value>,
"append_errors":<Boolean_value>,
"id":<String_value>,
"append_output":<Boolean_value>,
"command_text":<String_value>,
"profile_name":<String_value>}]}

<!--NeedCopy-->

get

URL: https://<MGMT-IP>/nitro/v2/config/command_execution_profile/id_value<String> HTTPS Method: GET

Request Headers: Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "command_execution_profile":[{
"tenant_id":<String_value>,
"append_errors":<Boolean_value>,
"id":<String_value>,
"append_output":<Boolean_value>,
"command_text":<String_value>,
"profile_name":<String_value>}]}

<!--NeedCopy-->

update

URL: https://<MGMT-IP>/nitro/v2/config/command_execution_profile/id_value<String> HTTPS Method: PUT

Request Headers: Content-Type: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Request Payload:

{"command_execution_profile":{
<b>"id":<String_value></b>,
"append_output":<Boolean_value>,
"profile_name":<String_value>,
"append_errors":<Boolean_value>,
"command_text":<String_value>}}

<!--NeedCopy-->

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "command_execution_profile":[{
"tenant_id":<String_value>,
"append_errors":<Boolean_value>,
"id":<String_value>,
"append_output":<Boolean_value>,
"command_text":<String_value>,
"profile_name":<String_value>}]}

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

command_execution_profile

June 20, 2023

Contributed by:

June 20, 2023

Contributed by:

command_execution_profile

Properties

Operations

add

delete

get (all)

get

update

In this article