authenticationtacacsaction

Last published : Oct 30, 2026
Configuration for TACACS action resource.

Properties

(click to see Operations)
Name Data Type Permissions Description
name <String> Read-write Name for the TACACS+ profile (action).
Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after TACACS profile is created.
The following requirement applies only to the Citrix ADC CLI:
If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my authentication action" or 'y authentication action').
Minimum length = 1
serverip <String> Read-write IP address assigned to the TACACS+ server.
Minimum length = 1
serverport <Integer> Read-write Port number on which the TACACS+ server listens for connections.
Default value: 49
Minimum value = 1
authtimeout <Double> Read-write Number of seconds the Citrix ADC waits for a response from the TACACS+ server.
Default value: 3
Minimum value = 1
tacacssecret <String> Read-write Key shared between the TACACS+ server and the Citrix ADC.
Required for allowing the Citrix ADC to communicate with the TACACS+ server.
Minimum length = 1
authorization <String> Read-write Use streaming authorization on the TACACS+ server.
Possible values = ON, OFF
accounting <String> Read-write Whether the TACACS+ server is currently accepting accounting messages.
Possible values = ON, OFF
auditfailedcmds <String> Read-write The state of the TACACS+ server that will receive accounting messages.
Possible values = ON, OFF
groupattrname <String> Read-write TACACS+ group attribute name.
Used for group extraction on the TACACS+ server.
defaultauthenticationgroup <String> Read-write This is the default group that is chosen when the authentication succeeds in addition to extracted groups.
attribute1 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '1' (where '1' changes for each attribute).
attribute2 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '2' (where '2' changes for each attribute).
attribute3 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '3' (where '3' changes for each attribute).
attribute4 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '4' (where '4' changes for each attribute).
attribute5 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '5' (where '5' changes for each attribute).
attribute6 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '6' (where '6' changes for each attribute).
attribute7 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '7' (where '7' changes for each attribute).
attribute8 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '8' (where '8' changes for each attribute).
attribute9 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '9' (where '9' changes for each attribute).
attribute10 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '10' (where '10' changes for each attribute).
attribute11 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '11' (where '11' changes for each attribute).
attribute12 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '12' (where '12' changes for each attribute).
attribute13 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '13' (where '13' changes for each attribute).
attribute14 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '14' (where '14' changes for each attribute).
attribute15 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '15' (where '15' changes for each attribute).
attribute16 <String> Read-write Name of the custom attribute to be extracted from server and stored at index '16' (where '16' changes for each attribute).
attributes <String> Read-write List of attribute names separated by ',' which needs to be fetched from tacacs server.
Note that preceeding and trailing spaces will be removed.
Attribute name can be 127 bytes and total length of this string should not cross 2047 bytes.
These attributes have multi-value support separated by ',' and stored as key-value pair in AAA session.
success <Double> Read-only .
failure <Double> Read-only .
__count <Double> Read-only count parameter

Operations

(click to see Properties)
Some options that you can use for each operations:
  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:
    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes
    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".
  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
    To do this, you must specify the username and password in the request header of the NITRO request as follows:
    X-NITRO-USER:<username>
    X-NITRO-PASS:<password>
    Note:In such cases, make sure that the request header DOES not include the following:
    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
*Note:*
Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationtacacsaction
HTTP Method:POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json
Request Payload:

{"authenticationtacacsaction":{
<b>"name":<String_value>,
</b>"serverip":<String_value>,
"serverport":<Integer_value>,
"authtimeout":<Double_value>,
"tacacssecret":<String_value>,
"authorization":<String_value>,
"accounting":<String_value>,
"auditfailedcmds":<String_value>,
"groupattrname":<String_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"attributes":<String_value>
}}
Response:
HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

delete

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationtacacsaction/name_value<String>
HTTP Method:DELETE
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

update

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationtacacsaction
HTTP Method:PUT
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json
Request Payload:

{"authenticationtacacsaction":{
<b>"name":<String_value>,
</b>"serverip":<String_value>,
"serverport":<Integer_value>,
"authtimeout":<Double_value>,
"tacacssecret":<String_value>,
"authorization":<String_value>,
"accounting":<String_value>,
"auditfailedcmds":<String_value>,
"groupattrname":<String_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"attributes":<String_value>
}}
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

unset

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationtacacsaction?action=unset
HTTP Method:POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json
Request Payload:

{"authenticationtacacsaction":{
<b>"name":<String_value>,
</b>"serverip":true,
"serverport":true,
"authtimeout":true,
"tacacssecret":true,
"authorization":true,
"accounting":true,
"auditfailedcmds":true,
"groupattrname":true,
"defaultauthenticationgroup":true,
"attribute1":true,
"attribute2":true,
"attribute3":true,
"attribute4":true,
"attribute5":true,
"attribute6":true,
"attribute7":true,
"attribute8":true,
"attribute9":true,
"attribute10":true,
"attribute11":true,
"attribute12":true,
"attribute13":true,
"attribute14":true,
"attribute15":true,
"attribute16":true,
"attributes":true
}}
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationtacacsaction
Query-parameters:
attrs
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationtacacsaction?attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
filter
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationtacacsaction?filter=property-name1:property-val1,property-name2:property-val2
Use this query-parameter to get the filtered set of authenticationtacacsaction resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.
view
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationtacacsaction?view=summary
Note:By default, the retrieved results are displayed in detail view (?view=detail).
pagination
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationtacacsaction?pagesize=#no;pageno=#no
Use this query-parameter to get the authenticationtacacsaction resources in chunks.
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:

{ "authenticationtacacsaction": [ {
"name":<String_value>,
"serverip":<String_value>,
"serverport":<Integer_value>,
"authtimeout":<Double_value>,
"tacacssecret":<String_value>,
"authorization":<String_value>,
"accounting":<String_value>,
"auditfailedcmds":<String_value>,
"groupattrname":<String_value>,
"success":<Double_value>,
"failure":<Double_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"attributes":<String_value>
}]}

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationtacacsaction/name_value<String>
Query-parameters:
attrs
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationtacacsaction/name_value<String>?attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
view
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationtacacsaction/name_value<String>?view=summary
Note:By default, the retrieved results are displayed in detail view (?view=detail).
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:

{ "authenticationtacacsaction": [ {
"name":<String_value>,
"serverip":<String_value>,
"serverport":<Integer_value>,
"authtimeout":<Double_value>,
"tacacssecret":<String_value>,
"authorization":<String_value>,
"accounting":<String_value>,
"auditfailedcmds":<String_value>,
"groupattrname":<String_value>,
"success":<Double_value>,
"failure":<Double_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"attributes":<String_value>
}]}

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationtacacsaction?count=yes
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:

{ "authenticationtacacsaction": [ { "__count": "#no"} ] }