lbprofile
Configuration for LB profile resource.
Properties
(click to see Operations)
| Name | Data Type | Permissions | Description |
|---|---|---|---|
| lbprofilename | <String> | Read-write | Name of the LB profile.
Minimum length = 1
|
| dbslb | <String> | Read-write | Enable database specific load balancing for MySQL and MSSQL service types.
Default value: DISABLED
Possible values = ENABLED, DISABLED
|
| processlocal | <String> | Read-write | By turning on this option packets destined to a vserver in a cluster will not under go any steering. Turn this option for single pa
cket request response mode or when the upstream device is performing a proper RSS for connection based distribution.
Default value: DISABLED
Possible values = ENABLED, DISABLED
|
| httponlycookieflag | <String> | Read-write | Include the HttpOnly attribute in persistence cookies. The HttpOnly attribute limits the scope of a cookie to HTTP requests and helps mitigate the risk of cross-site scripting attacks.
Default value: ENABLED
Possible values = ENABLED, DISABLED
|
| cookiepassphrase | <String> | Read-write | Use this parameter to specify the passphrase used to generate secured persistence cookie value. It specifies the passphrase with a maximum of 31 characters. |
| usesecuredpersistencecookie | <String> | Read-write | Encode persistence cookie values using SHA2 hash.
Default value: DISABLED
Possible values = ENABLED, DISABLED
|
| useencryptedpersistencecookie | <String> | Read-write | Encode persistence cookie values using SHA2 hash.
Default value: DISABLED
Possible values = ENABLED, DISABLED
|
| vsvrcount | <Double> | Read-only | Total number of vservers , the profile is bound to. |
| __count | <Double> | Read-only | count parameter |
Operations
(click to see Properties)
Some options that you can use for each operations:
-
Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yesIf any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".
-
Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,To do this, you must specify the username and password in the request header of the NITRO request as follows:X-NITRO-USER:<username>X-NITRO-PASS:<password>Note:In such cases, make sure that the request header DOES not include the following:Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
*Note:*
Mandatory parameters are marked in redand placeholder content is marked in <green>.
add
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lbprofile
HTTP Method:POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json
Request Payload:
{"lbprofile":{
<b>"lbprofilename":<String_value>,
</b>"dbslb":<String_value>,
"processlocal":<String_value>,
"httponlycookieflag":<String_value>,
"cookiepassphrase":<String_value>,
"usesecuredpersistencecookie":<String_value>,
"useencryptedpersistencecookie":<String_value>
}}
Response:
HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error
delete
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lbprofile/lbprofilename_value<String>
HTTP Method:DELETE
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error
update
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lbprofile
HTTP Method:PUT
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json
Request Payload:
{"lbprofile":{
<b>"lbprofilename":<String_value>,
</b>"dbslb":<String_value>,
"processlocal":<String_value>,
"httponlycookieflag":<String_value>,
"cookiepassphrase":<String_value>,
"usesecuredpersistencecookie":<String_value>,
"useencryptedpersistencecookie":<String_value>
}}
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error
unset
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lbprofile?action=unset
HTTP Method:POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json
Request Payload:
{"lbprofile":{
<b>"lbprofilename":<String_value>,
</b>"dbslb":true,
"processlocal":true,
"httponlycookieflag":true,
"cookiepassphrase":true,
"usesecuredpersistencecookie":true,
"useencryptedpersistencecookie":true
}}
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error
get (all)
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lbprofile
Query-parameters:
attrs
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lbprofile?attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
filter
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lbprofile?filter=property-name1:property-val1,property-name2:property-val2
Use this query-parameter to get the filtered set of lbprofile resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.
view
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lbprofile?view=summary
Note:By default, the retrieved results are displayed in detail view (?view=detail).
pagination
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lbprofile?pagesize=#no;pageno=#no
Use this query-parameter to get the lbprofile resources in chunks.
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:
{ "lbprofile": [ {
"lbprofilename":<String_value>,
"dbslb":<String_value>,
"processlocal":<String_value>,
"httponlycookieflag":<String_value>,
"cookiepassphrase":<String_value>,
"usesecuredpersistencecookie":<String_value>,
"useencryptedpersistencecookie":<String_value>,
"vsvrcount":<Double_value>
}]}
get
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lbprofile/lbprofilename_value<String>
Query-parameters:
attrs
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lbprofile/lbprofilename_value<String>?attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
view
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lbprofile/lbprofilename_value<String>?view=summary
Note:By default, the retrieved results are displayed in detail view (?view=detail).
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:
{ "lbprofile": [ {
"lbprofilename":<String_value>,
"dbslb":<String_value>,
"processlocal":<String_value>,
"httponlycookieflag":<String_value>,
"cookiepassphrase":<String_value>,
"usesecuredpersistencecookie":<String_value>,
"useencryptedpersistencecookie":<String_value>,
"vsvrcount":<Double_value>
}]}
count
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lbprofile?count=yes
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:
{ "lbprofile": [ { "__count": "#no"} ] }