| NSERR_1GSFPSPEEDLIMIT |
3968 |
0xf80 |
1G SFPs are restricted to speed 1000 or AUTO only |
| NSERR_1GSFPDUPLEXLIMIT |
3969 |
0xf81 |
1G SFPs are restricted to duplex FULL or AUTO only |
| NSERR_1GSPEEDLIMIT |
3970 |
0xf82 |
1G port can not be configured as 10G speed |
| NSERR_1GDUPLEXLIMIT |
3971 |
0xf83 |
1G port can not be configured as HALF duplex |
| NSERR_10GSPEEDLIMIT |
3972 |
0xf84 |
10G ports on this platform can only be configured as speed 1G, 10G or AUTO only |
| NSERR_10GDUPLEXLIMIT |
3973 |
0xf85 |
10G ports on this platform can only be configured as duplex FULL or AUTO only |
| NSERR_10GAUTONEGLIMIT |
3974 |
0xf86 |
10G ports on this platform do not support AUTONEG |
| NSERR_10GSPEEDONLY |
3975 |
0xf87 |
10G ports on this platform are restricted to speed 10000 or AUTO only |
| NSERR_FULLDUPLEXONLY |
3976 |
0xf88 |
These ports do not support HALF duplex mode |
| NSERR_AUTOINVALSPEED |
3977 |
0xf89 |
Static CLAG does not support speed as AUTO |
| NSERR_CLAGSPEEDREQ |
3978 |
0xf8a |
Static CLAG explicitly requires speed to be configured other than AUTO |
| NSERR_THROUGHPUTLIMIT |
3979 |
0xf8b |
Throughput limit error. Possible values: 1G port - 1000Mbps, 10G port - 10000Mbps, 40G port - 40000Mbps, Link Aggregation - 80000Mbps |
| NSERR_BANDWIDTHLIMIT |
3980 |
0xf8c |
Bandwidth limit error. Possible values: 1G port - 1000Mbps, 10G port - 10000Mbps, 40G port - 40000Mbps, Link Aggregation - 80000Mbps |
| NSERR_10GDAC_SPEEDLIMIT |
3981 |
0xf8d |
DAC port speed must be configured as 10G or AUTO |
| NSERR_VIF_LACP_CAUTION |
3982 |
0xf8e |
Ensure that the physical interface is not shared with any other VMs. |
| NSERR_LA_SLAVE_LIMIT |
3983 |
0xf8f |
Trying to bind more interfaces than allowed limit |
| NSERR_SLAVE_MTU_MISMATCH |
3987 |
0xf93 |
Interface MTU should be same as Channel MTU. |
| NSERR_BKPLANE_MTU_MISMATCH |
3988 |
0xf94 |
Interface MTU should be default or same as Backplane MTU. |
| NSERR_MTU_NOTALLOWED |
3989 |
0xf95 |
MTU change is not allowed on this interface. |
| NSERR_BACKPLANE_MTU_LIMIT |
3990 |
0xf96 |
Backplane Interface, Minimum user configured value for MTU is 1579. |
| NSERR_INTERFACE_SLAVE_MTU_LIMIT |
3991 |
0xf97 |
Interface is a part of channel, MTU change is not allowed. |
| NSERR_CHANNEL_RESTRICT |
447 |
0x1BF |
LA channel configuration on VPX running on SDX should be done only from Service VM |
| NSERR_PTP_CLUS_L3 |
3992 |
0xf98 |
Cluster INC Mode Enabled, PTP state change is not allowed. |
| NSERR_40GDUPLEXLIMIT |
3993 |
0xf99 |
40G ports on this platform can only be configured as duplex FULL or AUTO only |
| NSERR_40GSPEEDONLY |
3994 |
0xf9a |
40G ports on this platform are restricted to speed 40000 or AUTO only |
| NSERR_LRSET_FC_NOT_ALLOWED |
3996 |
0xf9c |
Flow Controle settings not allowed for link redundant set interface |
| NSERR_LRSET_LACP_SET_NOT_ALLOWED |
3997 |
0xf9d |
Dynamic LA(LACP) settings are not allowed for link redundant set interface |
| NSERR_LRSET_LLDPSET_NOT_ALLOWED |
3998 |
0xf9e |
LLDP settings are not allowed for link redundant set interface |
| NSERR_LRSET_SPEED_NOT_ALLOWED |
3999 |
0xf9f |
speed setting not allowed for link redundant set interface |
| NSERR_LRSET_PRIORITY_NOT_ALLOWED |
4026 |
0xfba |
lrset priority not allowed for link redundant set master interface |
| NSERR_LRSET_THROUGHPUT_NOT_ALLOWED |
4027 |
0xfbb |
throughput setting not allowed for link redundant set master interface |
| NSERR_LRSET_BW_SET_NOT_ALLOWED |
4028 |
0xfbc |
Bandwidth settings are not allowed for link redundant set interface |
| NSERR_LRSET_LAG_TYPE_NOT_ALLOWED |
4029 |
0xfbd |
Lagtype setting not allowed for link redundant set interface |
| NSERR_LRSET_DUPLEX_NOT_ALLOWED |
4030 |
0xfbe |
Duplex setting not allowed for link redundant set interface |
| NSERR_LRSET_AUTO_NEG_NOT_ALLOWED |
4031 |
0xfbf |
Disabling autonegotiation not allowed for link redundant set interface |
| NSERR_JF_ESX_VERSION_SUPPORT |
4070 |
0xfe6 |
Jumbo Frames are supported on ESX 5.5 version and onward |
| NSERR_TP_SETTINGS_NOT_ALLOWED |
3385 |
0xd39 |
Trunk Port settings on this interface is not supported |
| NSERR_LACP_SETTINGS_ON_TP_NOT_ALLOWED |
3386 |
0xd3a |
LACP settings on Trunk Port is not allowed |
| NSERR_IP6_ADDRESS_SETTING_FAILED |
3387 |
0xd3b |
IPv6 Address can not be added because MTA table got exhausted |
| NSERR_50GSPEEDLIMIT |
3388 |
0xd3c |
50G ports on this platform can only be configured as speed 10G, 25G, 40G, 50G or AUTO |
| NSERR_100GSPEEDLIMIT |
3389 |
0xd3d |
100G ports on this platform can only be configured as speed 10G, 25G, 40G, 50G, 100G or AUTO |