| NSERR_SLESSLB_LBMETHOD_NOTSUPPORTED |
1280 |
0x500 |
Incompatible LB method for sessionless vserver |
| NSERR_SLESSLB_PERSIST_NOTSUPPORTED |
1281 |
0x501 |
Incompatible persistence method for sessionless vserver |
| NSERR_SLESSLB_TYPE_NOTSUPPORTED |
1282 |
0x502 |
Sessionless vserver must be of type ANY, DNS or UDP |
| NSERR_SLESSLB_MODE_NOTSUPPORTED |
1283 |
0x503 |
Sessionless vserver must have MAC or IPTUNNEL mode set |
| NSERR_SLESSLB_SVC_USIPNOTSET |
1284 |
0x504 |
Service bound to a sessionless vserver must have UseSourceIP mode enabled |
| NSERR_WILDCARDVIP_LBMETHOD_INVAL |
1286 |
0x506 |
Invalid LB method for a wildcard vserver |
| NSERR_WILDCARDVIP_PERSIST_INVAL |
1287 |
0x507 |
Invalid persistence policy for a wildcard vserver |
| NSERR_LB_SO_THRESHOLD |
1288 |
0x508 |
Spill-over threshold should be a non-zero value |
| NSERR_CONNFAILOVER_USIP |
1289 |
0x509 |
Service must have Use Source IP option set in order to be bound to a connection failover enabled virtual server |
| NSERR_CONNFAILOVER_SERVICE |
1290 |
0x50a |
Connection failover can only be enabled on a virtual server of service type ANY |
| NSERR_LB_SO_DYNAMICCON_THRESHOLD |
1291 |
0x50B |
Spill-over threshold cannot be set for dynamic connection spill-over method |
| NSERR_LB_SO_ADDRVIP |
1292 |
0x50C |
DYNAMICCONNECTION spill-over cannot be set on a non-LB vserver |
| NSERR_CONNFAILOVER_NOTFOR_SLESS |
1293 |
0x50d |
Connection Failover is not supported for sessionless lb vserver\\n |
| NSERR_NEWSVC_PERCENT_CAPPED |
1294 |
0x50e |
Percentage value of requests capped at 100 |
| NSERR_SIP_NOCALLID |
1296 |
0x510 |
Missing Call-ID header field |
| NSERR_SIP_NOVIA |
1297 |
0x511 |
Missing Via header field |
| NSERR_SIP_NOCSEQ |
1298 |
0x512 |
Missing CSeq header field |
| NSERR_SIP_NOTO |
1299 |
0x513 |
Missing To header field |
| NSERR_SIP_NOFROM |
1300 |
0x514 |
Missing From header field |
| NSERR_SIP_NOMAX_FORWARDS |
1301 |
0x515 |
Missing Max-Forwards header field |
| NSERR_SIP_SERVICE_UNAVAILABLE |
1302 |
0x516 |
Service unavailable |
| NSERR_SVC_NOT_BOUND |
1303 |
0x517 |
Service not bound to Vserver |
| NSERR_SVCTYPE_MISMATCH |
1304 |
0x518 |
Service type mismatch between the vserver and service |
| NSERR_CH_CON_NOT_ALLOWED |
1305 |
0x519 |
CONNECTION header cannot be set |
| NSERR_LBPROFILE_DBS |
3572 |
0xdf4 |
DBSLB setting of LB profile cannot be changed with vservers associated with it |
| NSERR_LBPROFILE_EXIST |
3573 |
0xdf5 |
LB profile already exists |
| NSERR_LBPROFILE_NOENT |
3574 |
0xdf6 |
LB profile doesnt exist |
| NSERR_LBPROFILE_NOMEM |
3575 |
0xdf7 |
Cannot allocate memory for LB profile |
| NSERR_LBPROFILE_VSERVERSET |
3576 |
0xdf8 |
Cannot set vserver params which is associated with LB profile |
| NSERR_CH_INCOMPLETE_HDR |
1312 |
0x520 |
Custom Header string should end with CRLF |
| NSERR_SPILLOVERDISABLED |
1313 |
0x521 |
No spillover on the vserver due to max client setting 0on a bound service |
| NSERR_MAXTIMEEXCEEDED |
1314 |
0x522 |
Maximum time value for interval or responsetimeout or downtime is exceeded, rounding to maximum |
| NSERR_SCINVALPROTO |
1315 |
0x523 |
Cannot bind SC policy to non-HTTP service or vserver |
| NSERR_ROOTREC |
1316 |
0x524 |
Atleast one nameserver record should exist for the root domain |
| NSERR_ROOT_GLUEREC |
1317 |
0x525 |
Root domain nameserver address record should have atleast one ip address |
| NSERR_VIPINSERT_NOT_SUPPORTED |
1356 |
0x54c |
Vserver IP and port header insertion option not supported on this vserver. |
| NSERR_VSVR_ALRDY_BOUND |
1318 |
0x526 |
This vserver is already bound to a WLM |
| NSERR_INVALID_WLM_BINDING |
1319 |
0x527 |
Only LB vservers are allowed to bound to WLM |
| NSERR_VSVR_NOT_BOUND |
1320 |
0x528 |
Vserver not bound to WLM |
| NSERR_WLM_EXISTS |
1321 |
0x529 |
WLM already configured on this IP, port |
| NSERR_INVALID_TIMEOUT |
1322 |
0x52a |
Invalid persistence timeout: default timeout assigned |
| NSERR_CONNFAILOVER_INCMODE |
1323 |
0x52b |
Stateful connection failover cannot be enabled in INC mode |
| NSERR_CONNFAILOVER_TCPB |
1324 |
0x52c |
Stateful connection failover cannot be enabled on a vserver that binds services with TCP buffering enabled |
| NSERR_CONNFAILOVER_TCPB_SVC_BIND |
1326 |
0x52e |
Service with TCP buffering enabled cannot be bound to a vserver with stateful connection failover enabled |
| NSERR_CONNFAILOVER_TCPB_SVC_PARAM |
1327 |
0x52f |
TCP buffering cannot be enabled on a service bound to a vserver with stateful connection failover enabled |
| NSERR_CONNFAILOVER_SERVICE_STATEFULL |
1328 |
0x530 |
Stateful connection failover cannot be enabled on a vserver of this service type |
| NSERR_CONNFAILOVER_SSL_SVC_BIND |
1329 |
0x531 |
SSL TCP service cannot be bound to a TCP vserver with stateful connection failover enabled |
| NSERR_CONNFAILOVER_HA_INC_NODE |
1330 |
0x532 |
Ha node with INC mode enabled cannot be added to the system that has vserver(s) with stateful connection failover enabled |
| NSERR_CONNFAILOVER_SSL_SVC |
1331 |
0x533 |
Stateful connection failover cannot be enabled on a vserver that binds services of type SSL_TCP |
| NSERR_INVALID_PERSISTENCE |
1332 |
0x534 |
Invalid Persistence type |
| NSERR_RTSPSESSION_INVALID |
1333 |
0x535 |
Invalid RTSP session entry |
| NSERR_LB_METHOD_SAMEAS_BACKUP_METHOD |
1334 |
0x536 |
Backup load balancing method cannot be the same as the primary load balancing method |
| NSERR_SERVER_EXIST |
1335 |
0x537 |
Server already exists |
| NSERR_LB_SO_HEALTH |
1336 |
0x538 |
HEALTH spill-over cannot be set on a non-LB vserver |
| NSERR_REQ_RULE_MISSING |
1337 |
0x539 |
Request Rule is required, when Response rule is specified. |
| NSERR_CONNFAILOVER_BINDLO |
1338 |
0x53a |
Loopback service cannot be bound to vserver with connection failover enabled \\n |
| NSERR_CONNFAILOVER_SETWITHLO |
1339 |
0x53b |
Connection Failover cannot be set to STATEFUL/STATELESS on vserver with bound loopback service\\n |
| NSERR_REDIRECT_URL_NOT_APPLICABLE |
1340 |
0x53c |
Redirect URL cannot be configured on this vserver. |
| NSERR_CONNFAILOVER_NOT_SUPPORTED |
1342 |
0x53e |
Connection Failover is not supported for pattern based vservers |
| NSERR_NOBIND_ONPUSH |
1343 |
0x53f |
Bindings not allowed on push vserver |
| NSERR_PUSH_VSVR |
1344 |
0x540 |
Option cannot be set on push vserver |
| NSERR_ONLY_HTTPSSL |
1345 |
0x541 |
Option can only be set on http/ ssl vserver |
| NSERR_PUSH_BIND_EXISTS |
1346 |
0x542 |
A push vserver is already bound. Unbind before binding new vserver |
| NSERR_SET_PUSHVS_ONLY |
1347 |
0x543 |
Push vserver should be of type push or ssl_push only |
| NSERR_SLESS_NO_SUPPORT |
1348 |
0x544 |
Not supported for sessionless vservers |
| NSERR_LISTEN_POLICY_BIND |
1351 |
0X547 |
Error in binding listen policy to vserver(normal vserver already present) |
| NSERR_NO_LISTEN_POLICY_FOR_DUMMYVS |
1352 |
0x548 |
Cannot bind listen policy to dummy vservers |
| NSERR_LISTEN_POLICY_BIND_PRESENT |
1353 |
0X549 |
Error in binding listen policy to vserver(vserver with new priority already present) |
| NSERR_NO_LISTEN_PRI |
1354 |
0X54a |
Error in binding listen priority to normal vserver |
| NSERR_NORMAL_VS_NONE_LISTENPOL |
1355 |
0x54b |
The vserver already has None Listen Policy\\n |
| NSERR_NO_LISPRI_FOR_NONE_LISPOL |
1357 |
0x54d |
None listenpolicy doesnot have listen priority\\n |
| NSERR_INVALID_POLICY_STRING |
1358 |
0x54e |
Invalid listenpolicy entered\\n |
| NSERR_NODATALENOFFFORVS |
1359 |
0x54f |
Dataoffset and datalength are not required for this vserver\\n |
| NSERR_LBGRPPERSISWITHRDP |
1285 |
0x505 |
Persistency is not applicable for RDP vserver or LB group which has RDP vserver part of it |
| NSERR_CS_SOTHRESHOLD |
1370 |
0x55a |
Spillover threshold must be given with spillover method in Content Switching vserver |
| NSERR_INVALID_INSERTVSERVERIPPORT |
1392 |
0x570 |
V6TOV4MAPPING is not applicable to ipv4 vserver |
| NSERR_LB_SERVER_NOTEXIST |
1388 |
0x56c |
The Target LB Vserver does not exist |
| NSERR_BOUNDTO_CSACT |
1371 |
0x55b |
The Vserver referred by Content Switching action cannot be removed |
| NSERR_BOUNDTO_CSPOLICY |
1372 |
0x55c |
The Content Switching Action bound to Content Switching Policy cannot be removed |
| NSERR_INVALID_MULTIPLEBIND |
1373 |
0x55d |
Multiple Bind not supported for Content Switching Advanced policies without action |
| NSERR_CSPOLICY_HASACTION |
1374 |
0x55e |
LB vserver/gotoPriorityExpression/invoke not allowed during bind when content swtiching policy already has an action. |
| NSERR_CS_NOTSUPPORT_LB |
1375 |
0x55f |
The Protocol of given LB vserver is not supported by Content Switching action |
| NSERR_ACTION_NOTNOOP_CS |
1386 |
0x56a |
Do not provide gotoPriorityExpression/invoke because policy has action |
| NSERR_CSPOLICY_NOACTION |
1387 |
0x56b |
Either LB vserver or GotoPriorityExpression or Invoke must be provided while binding a Content Switching policy without action. |
| NSERR_CSPEPOLICY_SETNOACTION |
1389 |
0x56d |
Content Switching classic policy does not support action |
| NSERR_POLICY_USED_FOR_INVOKE |
1390 |
0x56e |
Do not give target LB beacuse the policy has been bound to multiple entities |
| NSERR_SPECIFY_BACKUP_NODE |
1393 |
0x571 |
Please specify the backup node. |
| NSERR_SAME_NODES |
1394 |
0x572 |
Owner and backup nodes need to different. |
| NSERR_INCOMPATIBLE_POLICY_SERVER_TYPE |
1391 |
0x56f |
Content switching vserver service type is not compatible with given policy expression |
| NSERR_PEPOLICY_BIND_NOTALLOWED |
1395 |
0x573 |
Binding of classic content switching policy to content switching policylabel is not allowed |
| NSERR_TCPKA_IDLETIME_TOO_LOW |
1396 |
0x574 |
Connection idle time cannot be lower than keep-alive probe interval |
| NSERR_OWNER_NODE_NOT_IN_CLUSTER |
1397 |
0x575 |
Owner node is not in the cluster config or is NOT ACTIVE |
| NSERR_BACKUP_NODE_NOT_IN_CLUSTER |
1398 |
0x576 |
Backup node is not in the cluster config or is NOT ACTIVE |
| NSERR_SPOTTED_VSERVER_NOT_SUPPORTED_IN_STANDALONE |
1399 |
0x577 |
Spotted vserver configuration not supported in standalone or HA deplyoment |
| NSERR_SPOTTED_CONFIG_NO_MATCH |
1400 |
0x578 |
Spotted config of the backup verser does not match the vserver |
| NSERR_OPTION_NOT_SUPPORTED |
1401 |
0x579 |
Skip persistency is supported only for ANY and UDP service types |
| NSERR_OPTION_NOT_SUPPORTED_IP |
1402 |
0x57a |
BYPASS is not supported for IP based vservers |
| NSERR_OWNER_NODE_NOT_SET |
1403 |
0x57b |
Owner node should be specified for cluster |
| NSERR_INVALID_RENAME |
1404 |
0x57c |
Rename is supported only for Advanced policies |
| NSERR_INVAL_LOCAL_NAMSVR_TYPE |
1405 |
0x57d |
Only UDP based local nameservers are allowed |
| NSERR_INVALID_TFTPORT |
1406 |
0x57e |
Invalid port for tftp vserver |
| NSERR_NO_RENAME |
1407 |
0x57f |
No Rename Supported |
| NSERR_USE_BINDCR_CMD |
88 |
0x58 |
Use Bind CR command to bind CR Vserver instead of Bind CS |
| NSERR_NOENT_AS_PROFILE |
1408 |
0x580 |
No such Autoscale profile |
| NSERR_LBREFFERED_IN_CSBINDING |
1409 |
0x581 |
Cannot remove LB Vserver which is reffered in CS policy bindings |
| NSERR_DEFAULTLB_NOT_BOUND |
1410 |
0x582 |
default LB mentioned is not bound |
| NSERR_NG_BIND_ENTITY |
1411 |
0x583 |
Error binding the node group to an entity |
| NSERR_ENTITY_BOUND_TO_ANOTHER_NG |
1412 |
0x584 |
The specified entity is already bound to a different node group |
| NSERR_ENTITY_ALREADY_BOUND |
1413 |
0x585 |
The specified entity is already bound to this node group |
| NSERR_ENTITY_NOT_BOUND_TO_NG |
1414 |
0x586 |
The specified entity is not bound to any node group |
| NSERR_NG_NOT_FOUND |
1415 |
0x587 |
Nodegroup is not found |
| NSERR_NG_HAS_BINDINGS |
1416 |
0x588 |
Nodegroup cannot be deleted, it has entities bound to it |
| NSERR_VSERVER_CANNOT_BIND |
1417 |
0x589 |
Vserver cannot bind to the nodegroup |
| NSERR_VSERVER_CANNOT_UNBIND |
1418 |
0x58a |
Vserver cannot unbind to the nodegroup |
| NSERR_NG_CANNOT_BE_STRICT |
1419 |
0x58b |
Nodegroup cannot be made strict as there are no nodes bound to it, but entities are bound |
| NSERR_NG_STRICT_AND_ZERODEPTH |
1420 |
0x58c |
Cannot bind an entity to a strict nodegroup with no nodes bound to it |
| NSERR_UNBINDING_LAST_NODE_FROM_STRICT_NG |
1421 |
0x58d |
Cannot unbind the last node from a strict nodegroup with entities bound to it |
| NSERR_NG_ALREADY_ADDED |
1422 |
0x58e |
Nodegroup is already added |
| NSERR_NG_ENTITY_NOMEM |
1423 |
0x58f |
No memory to establish entity to nodegroup association |
| NSERR_NG_MAX_CONFIGURED |
1424 |
0x590 |
Cannot add nodegroup; maximum number of nodegroups already added |
| NSERR_INVAL_CS_ACTION |
1425 |
0x591 |
Action given is not a CS action |
| NSERR_SET_CSACTION_DISALLOWED |
1426 |
0x592 |
Set disallowed for CS action from Target LB/targetVserver to Target Expression and vice versa |
| NSERR_RETAIN_VLAN |
1427 |
0x593 |
macmoderetainvlan applicable only for wildcard(IP and port) macmode vserver. Disable macmoderetainvlan attribute to change the mode of vserver |
| NSERR_BIND_BDGGROUP_SYNCVLAN |
1428 |
0x594 |
Sync vlan cannot be bound to bridgegroup |
| NSERR_DEL_SYNCVLAN |
1429 |
0x595 |
Sync vlan cannot be deleted |
| NSERR_CSPEPOL_PARTITION_NOT_ALLOWED |
1430 |
0x596 |
Current NON-default partition only supports Advanced Polices. |
| NSERR_LESSTHAN_PPE |
1438 |
0x59e |
Max/Min Reusepool connections should be greater than or equal to running Packet Engines. |
| NSERR_MCLIMITS |
1295 |
0x50f |
Dummy error to avoid issues when upgrade done from 9.3. |
| NSERR_SIP_BAD_REQUEST |
1431 |
0x597 |
Invalid SIP request. |
| NSERR_SIP_NO_CONTENT_LEN |
1432 |
0x598 |
No content length present. |
| NSERR_SIP_RET_MAX_INCOM_LEN |
1433 |
0x599 |
SIP InComp max limit reached. |
| NSERR_SIP_RET_RETRY |
1434 |
0x59a |
SIP packet retry. |
| NSERR_SIP_RET_NO_MEM |
1435 |
0x59b |
SIP no memory available. |
| NSERR_SIP_RET_HEADER_NOT_COMPLETE |
1436 |
0x59c |
Incomplete SIP headers. |
| NSERR_SIP_RET_FAILURE |
1437 |
0x59d |
SIP operation failed. |
| NSERR_CS_GSLB_DEFAULT |
1439 |
0x59f |
Default vserver type mismatch |
| NSERR_CS_GSLB_DNSRT_MISMATCH |
1306 |
0x51a |
DNSrecordType of CS GSLB vserver and Target Vserver should be same. |
| NSERR_CS_GSLB_INVALID_TARGET |
1307 |
0x51b |
CS Vserver of type GSLB can only have GSLB vserver as Target. |
| NSERR_CS_GSLB_POLICY_NO_ACTION |
1308 |
0x51c |
CS Policy has no action or CS action doesnt have targetVserver |
| NSERR_GSLB_SVC_ALREADY_BOUND_TO_CS |
1309 |
0x51d |
GSLB service bound to targetVserver is already bound to CS vserver |
| NSERR_CS_POLICY_NO_RULE |
1310 |
0x51e |
Binding CS policy to CS GSLB vserver requires rule |
| NSERR_VIP_BACKUP_ISCSGSLB |
1311 |
0x51f |
CS GSLB vserver cannot be backup of a non- CS GSLB vserver |
| NSERR_VSR_BOUND |
1325 |
0x52d |
Service/servicegroup is bound to one or more vserver. Please unbind and retry the operation. Also check allowBoundSvcRemovaloption in lb parameter to change this behaviour. |
| NSERR_SG_AUTOSCALE_REQ_SRV |
1504 |
0x5e0 |
Autoscale DNS must be enabled on servicegroup for binding server of SRV querytype |
| NSERR_SG_PORT_REQ |
1505 |
0x5e1 |
Port is not specified |
| NSERR_SRV_PORT_NREQ |
1506 |
0x5e2 |
Port should not be specified for DBS server of SRV querytype |
| NSERR_DBS_SPECIFIC_PARAMS |
1507 |
0x5e3 |
This parameter can only be used for DBS type servers |
| NSERR_LW_CPX |
1687 |
0x697 |
Operation not permitted |