| NSERR_MAX_PARTITION |
2752 |
0xac0 |
Maximum allowed partition limit reached |
| NSERR_PARTITION_NAME_EXIST |
2753 |
0xac1 |
Partition name already exist |
| NSERR_NO_PARTITION |
2755 |
0xac3 |
Partition does not exist |
| NSERR_DEL_PARTITION_BUSY |
2756 |
0xac4 |
Partition is busy, cant delete |
| NSERR_DEL_PARTITION_INUSE |
2757 |
0xac5 |
Partition is in use, cant delete |
| NSERR_NO_DEL_DFLT_PARTITION |
2758 |
0xac6 |
Default Partition cant be delete |
| NSERR_RM_PARTITION_CONFIRM |
2759 |
0xac7 |
Are you sure you want to remove partition (Y/N)? [N]: |
| NSERR_NOT_SUPPORTFORPARTITION |
2760 |
0xac8 |
This feature is not supported on partition |
| NSERR_AP_CONFIG_NOT_ALLOWED |
2761 |
0xac9 |
This configuration option is not supported on non-default partition |
| NSERR_VLAN_BDGGRP_PARTITION_EXIST |
2762 |
0xaca |
VLAN or VXLAN or BridgeGroup bound to a partition can not be deleted. |
| NSERR_AP_DEFVLAN |
2763 |
0xacb |
Default VLAN cannot be bound/unbound to/from a partition. |
| NSERR_VLAN_BDGGRP_PARTITION |
2764 |
0xacc |
The specified VLAN or VXLAN or BridgeGroup is bound to other partition. |
| NSERR_PQ_ARG_UNSUPPORTED_PARTITION |
2765 |
0xacd |
PQ feature is not supported in non-default partition. |
| NSERR_SC_ARG_UNSUPPORTED_PARTITION |
2766 |
0xace |
SC feature is not supported in non-default partition. |
| NSERR_MAX_PARTITIONS_ZEBOS |
2767 |
0xacf |
Maximum allowed partition limit for routing reached |
| NSERR_AP_SYNCVLAN |
2769 |
0xad1 |
SYNC VLAN cannot be bound/unbound to/from a partition. |
| NSERR_AP_VLAN_BDG_EXIST |
2770 |
0xad2 |
The specified VLAN cannot be bound to a partition because it is bound to a bridge group. |
| NSERR_AP_SDXMGMTVLAN |
2771 |
0xad3 |
The SDX management VLAN cannot be bound/unbound to/from a partition. |
| NSERR_AP_DEFAULT_PARTITION_CONFIG |
2772 |
0xad4 |
This configuration is allowed only from the default partition. |
| NSERR_AP_MEM_DECR |
2773 |
0xad5 |
Partitions memory limit cannot be reduced less than currently used memory |
| NSERR_AP_MISMATCH |
2774 |
0xad6 |
The specified entity is configured in some other partition. |
| NSERR_AP_PVID_IF_NOT_ALLOWED |
2775 |
0xad7 |
The specified VLAN cannot be configured as untagged member of interface because it is bound to partition. |
| NSERR_AP_VLAN_BINDING_NOT_ALLOWED |
2776 |
0xad8 |
The specified VLAN cannot be bound to a partition because it is configured as untagged member of interface. |
| NSERR_AP_NOT_SUPPORTFORSHAREDVLAN |
2777 |
0xad9 |
This feature is not supported on shared vlan. |
| NSERR_AP_SHAREDVLAN_CONFIG_NOT_ALLOWED_INCLUSTER |
2778 |
0xada |
Configuring vlan as shared is not supported on cluster. |
| NSERR_AP_SHAREDVLAN_BDG |
2779 |
0xadb |
Shared vlan cannot be bound/unbound to/from a bridge group. |
| NSERR_AP_SHAREDVLAN_TD |
2780 |
0xadc |
Shared vlan cannot be bound/unbound to/from a Traffic domain. |
| NSERR_AP_MCAST_PMAC |
2781 |
0xadd |
Partition MAC address cannot have multicast bit set. |
| NSERR_AP_VMAC_EXIST |
2782 |
0xade |
Another admin-partition with the same partition MAC address exist. |
| NSERR_AP_VMAC_BUSY |
2783 |
0xadf |
Partitions MAC address can not be unset when shared vlans are bound to it. |
| NSERR_AP_XS_CONN_FAILED |
2784 |
0xae0 |
Unable to communicate with the XenStore. |
| NSERR_AP_XS_NO_VMAC |
2785 |
0xae1 |
No partition MAC address is configured for the VPX on SDX. |
| NSERR_AP_XS_VMAC_NOTEXIST |
2786 |
0xae2 |
The specified partition MAC address is not configured for the VPX on SDX. |
| NSERR_AP_XS_VMAC_EXHAUSTED |
2787 |
0xae3 |
All partition MAC addresses configured for the VPX on SDX are in use. |
| NSERR_AP_ARP_VLAN_NOT_SPECIFIED |
2788 |
0xae4 |
VLAN must be specified while adding ARP entry within partition. |
| NSERR_AP_SHAREDVLAN_PART_EXIST |
2789 |
0xae5 |
This VLAN already bound to the specified partition. |
| NSERR_PARTITION_ID_EXIST |
2790 |
0xae6 |
Partition-id is already in use by another partition. |
| NSERR_SYNCNSVLAN_AP |
2791 |
0xae7 |
VLAN bound to Admin Partition cannot be configured as SYNC/NS VLAN. |
| NSERR_AP_NSVLAN |
2792 |
0xae8 |
NSVLAN cannot be bound to Admin Partition. |
| NSERR_VXLAN_VLAN_DIFF_PARTITION |
2799 |
0xaef |
VXLAN and VLAN belong to different partitions. |
| NSERR_AP_VXLAN_TUNNEL_NOT_ALLOWED |
2800 |
0xaf0 |
IPtunnel of type vxlan cannot be configured in non default partition |
| NSERR_VXLAN_CONFIG_INPART |
2801 |
0xaf1 |
This vxlan config not supported in non-default partition. |
| NSERR_VXLAN_OTHER_PARTITION |
2802 |
0xaf2 |
Specified vxlan is already bound to some other partition. |
| NSERR_VXLAN_VLAN_BIND |
2803 |
0xaf3 |
When vxlan extends vlan, these operations should be done on vlan |
| NSERR_VXLAN_IP_BINDING_CURPART |
2804 |
0xaf4 |
IP binding to vxlan should be done in vxlan partition alone |
| NSERR_VXLAN_BOUNDTO_PARTITION |
2805 |
0xaf5 |
Specified vxlan is already bound to the partition. |
| NSERR_DYNROUTING_PARTITION |
2806 |
0xaf6 |
Dynamic Routing should be enabled or disabled in vlan/vxlan partition |
| NSERR_AP_SHAREDVLAN_VXLAN |
2807 |
0xaf7 |
Shared vlan cannot be bound/unbound to/from a vxlan. |
| NSERR_AP_VLAN_VXLAN_EXIST |
2808 |
0xaf8 |
The specified VLAN cannot be shared to a partition because it is extended by a vxlan . |
| NSERR_AP_STATIC_ARP_ND6_VXLAN_NOT_ALLOWED |
2809 |
0xaf9 |
Static arp/nd6 entries cannot be added with vxlan in non default partition |
| NSERR_AP_MEM_MIN_LIMIT |
2810 |
0xafa |
Partitions memory limit cannot be less than 5MB |
| NSERR_AP_BDGGRP_BINDING_NOT_ALLOWED |
2811 |
0xafb |
The specified BridgeGroup cannot be bound to a partition because one of its member VLAN is configured as untagged member of interface. |
| NSERR_AP_NOT_LOCAL_ADMIN_PMAC |
2812 |
0xafc |
Local-admin bit must be set for Partition MAC address. |
| NSERR_AP_NOMEM |
2813 |
0xafd |
Cannot allocate memory. The total memory budgeted across all partitions will exceed the system capacity. |