| NSERR_RNAT_INV |
769 |
0x301 |
Reverse NAT not applicable for default route. |
| NSERR_INVALID_IF |
770 |
0x302 |
Invalid interface name/number. |
| NSERR_MGRLIMIT_REACHED |
771 |
0x303 |
Maximum manager limit reached. |
| NSERR_SP_INVALD_TABLE |
772 |
0x304 |
SP table entries should be in increasing order. |
| NSERR_RNAT_NATIP_EXISTS |
773 |
0x305 |
RNAT to the target network with specified NAT IP already exists. |
| NSERR_RNAT_EXISTS |
774 |
0x306 |
ACL or NETWORK based RNAT rule already exists. |
| NSERR_RNAT_NOT_EXISTS |
775 |
0x307 |
ACL or NETWORK based RNAT rule does not exist. |
| NSERR_RNAT_NATIP_NOT_EXISTS |
776 |
0x308 |
RNAT to the target network with specified NAT IP doesnt exist. |
| NSERR_RNAT_INVALID_NATIP |
777 |
0x309 |
NAT IP is not valid. |
| NSERR_RNAT_XACLWITHTTL |
778 |
0x30a |
Acl with ttl can not be used in NAT64/RNAT/RNAT6/ForwardingSession/LSN rule. |
| NSERR_ARP_DISABLED |
784 |
0x310 |
IP has arp disabled. |
| NSERR_ARP_SEC_NOT_OWNEDIP |
785 |
0x311 |
Secondary can not arp for this IP. |
| NSERR_CPE_RULE_INVAL |
786 |
0x312 |
Invalid rule. |
| NSERR_INVAL_FLOWTYPE |
787 |
0x313 |
Only authorization, audit, VPN session and traffic policies can be bound to aaa user or group. |
| NSERR_INVAL_POLICY_TYPE |
788 |
0x314 |
Response rule is invalid in an authorization policy. |
| NSERR_CPE_RULE_ACTION_INVAL |
789 |
0x315 |
Request action is valid only for request rule. |
| NSERR_CPE_DEF_SET_INVAL |
790 |
0x316 |
Default policy cannot be set. |
| NSERR_INVAL_FORCECLEANUP |
791 |
0x317 |
Invalid forcecleanup value. |
| NSERR_INVAL_AAA_GROUP |
792 |
0x318 |
Invalid authorizationgroup value. |
| NSERR_INVAL_PROXY |
793 |
0x319 |
Invalid allprotocolproxy value. |
| NSERR_INVAL_HTTTPPROXY |
800 |
0x320 |
Invalid HTTP proxy value. |
| NSERR_INVAL_FTPPROXY |
801 |
0x321 |
Invalid FTP proxy value. |
| NSERR_INVAL_SOCKPROXY |
802 |
0x322 |
Invalid SOCKS proxy value. |
| NSERR_INVAL_GOPHERPROXY |
803 |
0x323 |
Invalid GOPHER proxy value. |
| NSERR_INVAL_SSLPROXY |
804 |
0x324 |
Invalid SSL proxy value. |
| NSERR_INVAL_AAAGRP_MAX |
805 |
0x325 |
Max 5 groups can be specified in authorizationgroup. |
| NSERR_INVAL_MAX_PORT_NUM |
806 |
0x326 |
Maximum 16 ports can be specified in httpport. |
| NSERR_INVAL_HTTPPORT |
807 |
0x327 |
Invalid port. |
| NSERR_INVAL_VPNVSERER_POLTYPE |
808 |
0x328 |
This type of policy cannot be bound to VPN Vserver. |
| NSERR_INVAL_VPNGLOBAL_POLTYPE |
809 |
0x329 |
This type of policy cannot be bound to VPN Global. |
| NSERR_CPE_REM_INUSE |
810 |
0x32a |
Bound policy cannot be removed. |
| NSERR_PROXY_CONFLICT |
811 |
0x32b |
Proxy server for all protocols already configured. |
| NSERR_PROXY_INVAL |
812 |
0x32c |
Domain names allowed only if proxy type is browser |
| NSERR_PXYEXCPT_INVAL |
813 |
0x32d |
Proxy exception allowed only if proxy type is browser |
| NSERR_CPE_POLTYPE_NO_CSE |
814 |
0x32e |
Policy type does not support client security expressions in rule |
| NSERR_SESSACT_CSE_INCOMPATIBLE |
815 |
0x32f |
Session action and rule are incompatible |
| NSERR_NOMEM_CSE |
816 |
0x330 |
Not enough memory while adding client security expressions |
| NSERR_INCOMPAT_FS_RULE |
817 |
0x331 |
File system expressions supported in authorization policy only |
| NSERR_INCOMPAT_FS_MIX |
818 |
0x332 |
Incompatible expressions mixed with file system expressions in rule |
| NSERR_DR_ENABLE |
819 |
0x333 |
Dynamic routing can be enabled on only one IP per subnet |
| NSERR_MAX_DISTANCE |
820 |
0x334 |
Only null interface routes can have distance equal to 255 |
| NSERR_NULL_ROUTE_DISTANCE |
821 |
0x335 |
It is not possible to set the administrative distance/cost metric for a null interface route |
| NSERR_BAD_ACTION_TCP_PROFILE_TYPE |
822 |
0x336 |
TCP profile cannot be set to this service type |
| NSERR_BAD_ACTION_HTTP_PROFILE_TYPE |
823 |
0x337 |
HTTP profile cannot be set to this service type |
| NSERR_SP_INVALID_THRESHOLD |
824 |
0x338 |
Invalid base threshold value |
| NSERR_VIP_ROUTE_EXISTS |
825 |
0x339 |
VIP exists for this host route |
| NSERR_ACTION_BOUND |
832 |
0x340 |
Action bound to policy can not be deleted. |
| NSERR_MAX_IPLIMIT |
833 |
0x341 |
Maximum limit for bound IP to this resource record reached, remaining IPs destined for this resource record will be discarded. |
| NSERR_BAD_PREFIX_LEN |
826 |
0x33a |
Invalid rnat/lsn network prefix len it must be 0-128 |
| NSERR_INV_NETADDR |
827 |
0x33b |
Invalid IPv6 network address |
| NSERR_MIN_DISTANCE |
828 |
0x33c |
Static route cannot have distance less than 1 |
| NSERR_IPSEC_PROFILE_INUSE |
829 |
0x33d |
Profile is in use by an ip tunnel. |
| NSERR_IPSEC_INVALID_PROFILE_NAME |
830 |
0x33e |
Invalid profile name. |
| NSERR_SPOTTED |
831 |
0x33f |
Spotted IP cannot be used here |
| NSERR_IPSEC_PBR_ONLY_IP_SUPPORTED |
834 |
0x342 |
Only IP range is supported |
| NSERR_IPSEC_IP_NOT_CONTIGUOUS |
835 |
0x343 |
Invalid IP range. The IP range does not cover all the IPs for a given subnet mask |
| NSERR_INVAL_USER_ACCOUNTING |
836 |
0x344 |
Invalid userAccounting value. userAccounting value must be a radiusPolicy. |
| NSERR_RDP_PROFILE_INUSE |
837 |
0x345 |
Profile is in use. |
| NSERR_RDP_INVALID_PROFILE_NAME |
838 |
0x346 |
Invalid profile name. |
| NSERR_RDP_INVALID_RDP_FILE_NAME |
839 |
0x347 |
RDP file name should have .rdp extension and some special characters for RDP file name are not supported. |
| NSERR_RDP_INVALID_SERVERPROFILE_NAME |
840 |
0x348 |
Invalid server profile name. |
| NSERR_RDP_SERVERPROFILE_ALREADY_IN_USE |
841 |
0x349 |
Server profile is already in use. |
| NSERR_AUTO_PROXY_URL_INVALID |
842 |
0x34a |
Invalid Autoproxy URL |
| NSERR_AUTO_PROXY_NO_BROWSER |
843 |
0x34b |
Autoproxy URL is allowed only if proxy type is Browser. |
| NSERR_AUTO_PROXY_CONFLICT |
844 |
0x34c |
Both Autoproxy URL and manual proxy parameters (allprotocolproxy, http proxy, ftp proxy, proxy exception list, ...) cannot be configured at same time. |
| NSERR_RDP_INVALID_HOST_LEN |
848 |
0x350 |
Invalid Host length. Atleast 3 characters expected |
| NSERR_RDP_NEED_IP |
849 |
0x351 |
RDP IP is needed |
| NSERR_IPSEC_INV_PROF |
850 |
0x352 |
For IPSEC tunnels, profile name cannot be none |
| NSERR_RDP_NEED_PSK |
854 |
0x356 |
PSK is needed |
| NSERR_IPSEC_ONLY_V1 |
858 |
0x35a |
Responder Only config is supported with IKEv1 |
| NSERR_RDP_LISTENER_SPECIFY_PORT |
859 |
0x35b |
Invalid Listener. Specify Port |
| NSERR_RDP_INVALID_LISTENER_HOST |
860 |
0x35c |
Invalid Listener. Specify valid host, atleast 3 characters expected |
| NSERR_RDP_LISTENER_INVALID_PORT |
861 |
0x35d |
Invalid Listener. Specify valid Port |
| NSERR_PROXY_NOT_ALLOWED |
862 |
0x35e |
Proxy feature not licensed |
| NSERR_HOST_RT_GW_NOT_SET |
3806 |
0xede |
Host Route Gateway not set |