| NSERR_MONITOR_INTERVAL |
2128 |
0x850 |
Monitor interval must be greater than response timeout |
| NSERR_MONITOR_DESTIP |
2129 |
0x851 |
Destination IP must be specified for transparent, tunneled or tos monitors |
| NSERR_MONITOR_CODES |
2130 |
0x852 |
Too many response codes, only 16 allowed |
| NSERR_MONITOR_REF |
2131 |
0x853 |
Monitor must be unbound before it can be deleted |
| NSERR_MONITOR_BUILTIN |
2132 |
0x854 |
Built-in monitors cannot be deleted |
| NSERR_MONITOR_BOUND |
2133 |
0x855 |
The monitor is already bound to the service |
| NSERR_MONITOR_TYPE |
2134 |
0x856 |
Invalid monitor type |
| NSERR_MONITOR_LOCAL |
2135 |
0x857 |
Monitor object cannot be bound to local service |
| NSERR_TIMEOUT_RANGE |
2136 |
0x858 |
Timeout value out of range; enter a value between 2 minutes and 1440 minutes |
| NSERR_INVALIDHASHLEN |
2137 |
0x859 |
Hashlength should be between 1 and 4096 (inclusive) |
| NSERR_NOTAUTHORIZED |
2138 |
0x85A |
Not authorized to execute this command |
| NSERR_MONITOR_DEFAULT |
2139 |
0x85B |
No operations allowed with the default monitor |
| NSERR_MONITOR_LDNS_ADD_PERM |
2140 |
0x85C |
Cannot add monitor of ldns type |
| NSERR_MONITOR_LDNS_BIND_PERM |
2141 |
0x85D |
Cannot bind ldns monitor |
| NSERR_BACKUP_LOOP |
2144 |
0x860 |
The VIP is already a backup in the chain |
| NSERR_SECURE_UDP |
2154 |
0x86A |
Secure mode not supported for this protocol |
| NSERR_MONITOR_WRONG_TYPE |
2155 |
0x86B |
Existing monitor is of different type than given |
| NSERR_LRTM_PERM |
2156 |
0x86C |
Enabling LRTM on this monitor type is not permitted |
| NSERR_MONITOR_SCRIPTNAME |
2157 |
0x86D |
Invalid script name for user monitor |
| NSERR_MONITOR_DISPATCHERIP |
2159 |
0x86F |
Invalid dispatcher IP for user monitor |
| NSERR_MONITOR_USERPERM |
2160 |
0x870 |
Operation not permitted for a user monitor |
| NSERR_MONITOR_NOCODES |
2161 |
0x871 |
A response code is required for this monitor type |
| NSERR_INVAL_MON |
2162 |
0x872 |
Attempt to bind invalid monitor type |
| NSERR_TYPE_EXISTS |
2163 |
0x873 |
Only one monitor of this type can be bound to a service |
| NSERR_MONITOR_UNBIND_DEFAULT |
2164 |
0x874 |
Default monitor cannot be unbound from a service |
| NSERR_MONITOR_BIND_DEFAULT |
2165 |
0x875 |
Default monitor cannot be bound explicitly to a service |
| NSERR_MONITOR_DISABLE_DEFAULT |
2166 |
0x876 |
Default monitor cannot be disabled or enabled |
| NSERR_DRTM_PERM |
2167 |
0x877 |
Dynamic response timeout is not permitted on this monitor type |
| NSERR_MON_DTRM_DEVIATION |
2168 |
0x878 |
Response timeout of the monitor has been changed to interval - 1 |
| NSERR_MONITOR_INVALID_VALUE |
2169 |
0x879 |
Time parameter must be a multiple of 10 |
| NSERR_MONITOR_NOT_BOUND |
2170 |
0x87A |
Monitor not bound to service |
| NSERR_INVALID_MONITOR |
2171 |
0x87B |
Monitor does not exist |
| NSERR_MONITOR_NO_SUCHIPADDR |
2172 |
0x87C |
Some IP addresses were not present |
| NSERR_MONITOR_SCRIPT_ARG_SIZE |
2173 |
0x87D |
Combined argument size too long |
| NSERR_METRICTABLE_NOENT |
2174 |
0x87E |
Metric table does not exist |
| NSERR_METRICTABLE_EXIST |
2175 |
0x87F |
Metric table exists |
| NSERR_DEL_METRICTABLE_PERMANENT |
2176 |
0x880 |
Permanent metric table cannot be deleted |
| NSERR_MAX_METRIC_BINDING |
2177 |
0x881 |
Maximum of 10 SNMP type metric can be bound to the monitor |
| NSERR_METRIC_NOENT |
2178 |
0x882 |
Metric does not exist |
| NSERR_METRIC_EXISTS |
2179 |
0x883 |
Metric exists |
| NSERR_OID_EXIST |
2180 |
0x884 |
SNMP OID exists |
| NSERR_SNMP_OID_INVAL |
2181 |
0x885 |
SNMP OID is invalid |
| NSERR_METRICTABLE_RDONLY |
2182 |
0x886 |
No operations allowed on read only metric table |
| NSERR_THRESHOLD_ZERO |
2183 |
0x887 |
This metric will not be used for CUSTOM LB as its threshold value is zero |
| NSERR_LDAP_MONITOR_INCOMPLETE |
2184 |
0x888 |
bindDN or baseDN must be specified before LDAP monitor can be used |
| NSERR_MYSQL_MONITOR_INCOMPLETE |
2185 |
0x889 |
userName or database must be specified before MYSQL monitor can be used |
| NSERR_POP3_MONITOR_INCOMPLETE |
2186 |
0x88A |
userName must be specified before POP3 monitor can be used |
| NSERR_NNTP_MONITOR_INCOMPLETE |
2187 |
0x88B |
group must be specified before NNTP monitor can be used |
| NSERR_FTPEXTENDED_MONITOR_INCOMPLETE |
2188 |
0x88C |
fileName must be specified before FTP-EXTENDED monitor can be used |
| NSERR_SNMP_MONITOR_INCOMPLETE |
2189 |
0x88D |
snmpOID or snmpCommunity must be specified before SNMP monitor can be used |
| NSERR_CITRIX_XML_SERVICE |
2190 |
0x88E |
application must be specified before CITRIX-XML-SERVICE monitor can be used |
| NSERR_CITRIX_WEB_INTERFACE |
2191 |
0x88F |
sitePath must be specified before CITRIX-WEB-INTERFACE monitor can be used |
| NSERR_LDNS_MON_CANT_DISABLE |
2192 |
0x890 |
Atleast one ldns monitor needs to be enabled |
| NSERR_RES_RETRY_ON_IP_SVR |
2193 |
0x891 |
Resolve retry can be set only on domain based servers |
| NSERR_IP_ON_DBS_SVR |
2194 |
0x892 |
IP Address cannot be set on a domain based server |
| NSERR_MONITOR_FAILURERETRIES |
2196 |
0x894 |
Monitor retries must be greater than monitor failureRetries |
| NSERR_MONITOR_IP |
2198 |
0x896 |
The server/monitor destination ip address is not appropriate for this monitor |
| NSERR_MONITOR_SUBNET |
2199 |
0x897 |
The server/monitor destination ip address should be in a directly connected subnet for this monitor |
| NSERR_MONITOR_STATIC |
2200 |
0x898 |
A static/permanent MAC entry is configured for the server/monitor destination ip address |
| NSERR_TOSID_NOT_SET |
2201 |
0x899 |
Tos id must be specified for tos enabled vserver/monitor |
| NSERR_FAILURERETRIES_NOT_SUPPORTED |
2202 |
0x89A |
The failure retries is not supported for this monitor type. Resetting the value of failure retries to 0(Disabled). |
| NSERR_SUCCESSRETRIES_NOT_SUPPORTED |
2203 |
0x89B |
The success retries is not supported for this monitor type. Resetting the value of success entries to 1(Disabled). |
| NSERR_SETVS_INVAL_MYSQLPARAMS |
2204 |
0x89C |
This parameter is only applicable to a MYSQL vserver. |
| NSERR_SETVS_INVAL_PROTOCOL_PARAMS |
2205 |
0x89D |
The parameters are only applicable to HTTP or SSL vservers. |
| NSERR_SETVS_INVAL_PROTOCOLS_PARAMS |
2206 |
0x89E |
The parameters are only applicable to HTTP , SSL or RTSP vservers. |
| NSERR_DDC_VALIDATE_CRED_REQUIRED |
2207 |
0x89F |
Username, password and ddc domain are required for Xen Desktop monitor\\n |
| NSERR_CITRIX_WI_EXTENDED_MONITOR_INCOMPLETE |
2208 |
0x8A0 |
userName, password, sitepath and domain must be specified before CITRIX-WI-EXTENDED monitor can be used |
| NSERR_SETVS_INVAL_MSSQLPARAMS |
2209 |
0x8A1 |
This parameter is only applicable to a MSSQL vserver. |
| NSERR_DRTM_MON_BOUNDED_SVC |
2210 |
0x8A2 |
In a cluster system, deviation cant be set/unset on any already bound monitor. |
| NSERR_MONITOR_RESP_TO_THRESH |
2211 |
0X8A3 |
Response timeout threshold is rounded off to nearest multiple of 10 less than the given value |
| NSERR_PASSIVE_ON_LOAD_ONLY |
2212 |
0x8A4 |
PASSIVE option can be set only on LOAD monitors. |
| NSERR_SETVS_INVAL_ORACLEPARAMS |
2213 |
0x8A5 |
This parameter is only applicable to a ORACLE vserver. |
| NSERR_RADIUS_ACCOUNTING_MONITOR_INCOMPLETE |
2214 |
0x8A6 |
Secret key must be specified before RADIUS ACCOUNTING monitor can be used |
| NSERR_MONITOR_SCRIPT_ARG_CNT |
2215 |
0x8A7 |
Too many script arguments |
| NSERR_INVALID_DBSLB_BIND |
2216 |
0x8A8 |
More than one bind not possible on one service for DBSLB |
| NSERR_USER_NONETPROF |
2217 |
0x8A9 |
Netprofile cannot be set on scriptable monitors, so ignoring the configured netprofile for this monitor. |
| NSERR_MONITOR_NO_SSLPROFILE_BOUND |
2218 |
0x8AA |
No SSL profile is attached to monitor. Attach SSL profile first |
| NSERR_DIAMETER_MONITOR_INCOMPLETE |
3550 |
0xDDE |
originHost and originRealm configuration is missing |