| NSERR_CLNOTEXIST |
2448 |
0x990 |
Cluster does not exist |
| NSERR_TOOMANYCLS |
2449 |
0x991 |
This node is already added to another cluster |
| NSERR_RMLOCALNODE |
2450 |
0x992 |
Local Node cannot be deleted |
| NSERR_BKPLANEENABLED |
2451 |
0x993 |
Cluster Backplane is enabled on this interface |
| NSERR_LOCALNODE_NOTCONFIGURED |
2452 |
0x994 |
Clustering cannot be enabled as the local node is not a member of the cluster. |
| NSERR_HACL_CANNOT_COEXIST |
2453 |
0x995 |
Clustering and HA cannot coexist. |
| NSERR_CLACPKEYNOTCRT |
2454 |
0x996 |
LACP key for Node/cluster is not correct |
| NSERR_CLNODE_EXIST |
2455 |
0x997 |
already in cluster |
| NSERR_BKPLANEDISABLED |
2456 |
0x998 |
Disabling Cluster backplane interface |
| NSERR_CLAGTHROUGHPUT |
2457 |
0x999 |
Currently throughput settings are not allowed on CLAG |
| NSERR_LICMISMATCH |
2458 |
0x99A |
License mismatch between Configuration Coordinator and local node |
| NSERR_CLIP_INVALIDNETMASK |
2459 |
0x99B |
CLIP netmask should be 255.255.255.255. |
| NSERR_BKPLANELACPDELETE |
2460 |
0x99C |
This is the last interface in LACP channel configured as backplane |
| NSERR_LINKSETMEMBER |
2461 |
0x99D |
Interface/Channel is Linkset member. |
| NSERR_CONFIG_PARAM |
2462 |
0x99E |
Setting up of Citrix ADC parameter ignored using this command in HA/Cluster mode. Use set nsparamcommand for this purpose. |
| NSERR_CLIP_INVALIDPREFIXLEN |
2463 |
0x99F |
CLIP prefix length should be 128. |
| NSERR_CLUSTER_L2NOTSUPP |
2464 |
0x9A0 |
L2 Mode not supported in Cluster mode. |
| NSERR_LINKSET_ONEPERNODE |
2465 |
0x9A1 |
Linkset can have only one Interface/Channel per Node |
| NSERR_LINKSET_NOTBOUND |
2466 |
0x9A2 |
Interface/Channel not bound to Linkset |
| NSERR_LINKSET_IDINVALID |
2467 |
0x9A3 |
Linkset name should be of form LS/ |
| NSERR_CLUSTER_NBNOTSUPP |
2468 |
0x9A4 |
CloudBridge is not supported in Cluster mode. |
| NSERR_CLUSTER_VPNNOTSUPP |
2469 |
0x9A5 |
SSLVPN is not supported in Cluster mode. |
| NSERR_CLUSTER_AAANOTSUPP |
2470 |
0x9A6 |
AAA is not supported in Cluster mode. |
| NSERR_CLUSTER_IPSECNOTSUPP |
2471 |
0x9A7 |
IPSEC is not supported in Cluster mode. |
| NSERR_LINKSET_LAMEMBER |
2472 |
0x9A8 |
Interface part of a Channel |
| NSERR_CLIP_LOCALNODE_NOTCONFIGURED |
2473 |
0x9A9 |
CLIP cannot be added as the local node is not a member of the cluster. |
| NSERR_CLVERSIONMISMATCH |
2474 |
0x9AA |
Cluster version mismatch between Configuration Coordinator and local node |
| NSERR_CLUSTER_CMNOTSUPP |
2475 |
0x9AB |
Connection Mirroring is not supported in Cluster mode |
| NSERR_ARP_CLAG_OWNERNODE_MANDATORY |
2476 |
0x9AC |
Owner Node should be specified for CLAG. |
| NSERR_ARP_OWNERNODE_MANDATORY |
2477 |
0x9AD |
Owner Node should be specified. |
| NSERR_NOOPCCO |
2478 |
0x9AE |
Operation not permitted on the Configuration Coordinator. |
| NSERR_SPOTTED_CONFIG_PRESENT |
2479 |
0x9AF |
Operation not permitted as the node is part of spotted entity configuration. |
| NSERR_NOT_CLUSTER_IP |
2480 |
0x9B0 |
IP address should be a CLIP address. |
| NSERR_CLUSTER_NNRES |
2481 |
0x9B1 |
Error in communication with other nodes in the cluster |
| NSERR_LAST_CLUSTER_IP_REMOVAL |
2482 |
0x9B2 |
A Citrix ADC cluster must have a minimum of one cluster IP address. This is the last available cluster IP address and hence it cannot be deleted. |
| NSERR_CONFIG_PARAM_INVALID |
2483 |
0x9B3 |
Configured Param(s) too small for Cluster. Parameter value(s) will be bumped to OVS node count. |
| NSERR_CLUSTER_INVALIDNODE |
2484 |
0x9B4 |
Owner node value should be between 0 and 31, both inclusive. |
| NSERR_LRONCLACPONLY |
2485 |
0x9B5 |
Link Redundancy can be set only in Cluster LACP Channels |
| NSERR_MULTIBIND_NOT_SUPPINCLUSTER |
2486 |
0x9B6 |
Multiple Bindings in Single Bind Command not Supported in Cluster. |
| NSERR_CLUSTER_FISNAMES_DUPNOTALLOWED |
2487 |
0x9B7 |
In a cluster setup, the FIS name on each node must be unique. |
| NSERR_CLUSTER_CLAG_NOLOCALINTF |
2488 |
0x9B8 |
CLA cannot be bound to the FIS as the CLA does not contain a local interface. |
| NSERR_FIS_MAX_LIMIT |
2489 |
0x9B9 |
An appliance can have a maximum of 64 failover interface sets (FIS). This appliance or ownernode (cluster) already has maximum number of allowable FIS. |
| NSERR_BOUND_TO_FIS |
2490 |
0x9BA |
Interface bound to FIS. |
| NSERR_CHANNEL_OPEN_FAILED |
2491 |
0x9BB |
Unable to open channel |
| NSERR_NOT_BOUND_TO_FIS |
2492 |
0x9BC |
Interface not bound to this FIS |
| NSERR_CLUSTER_INC_NOTSUPP |
2493 |
0x9BD |
Feature not supported when cluster is configured in INC mode |
| NSERR_CONFIG_NG_CHANGED |
4095 |
0xfff |
Config NodeGroup changed, force cluster sync should be fired on newly added node to be in sync |
| NSERR_STRIPED_IP_EXIST |
2494 |
0x9BE |
Striped SNIPs/MIPs must be removed when transitioning to cluster-inc |
| NSERR_WRONG_NG |
2495 |
0x9BF |
All cluster nodes should be bound to DEFAULT_NG before transitioning to cluster-inc |
| NSERR_NG_REQUIRED |
2496 |
0x9C0 |
The nodegroup parameter is mandatory when the -inc parameter is enabled |
| NSERR_NG_CHANGE |
2497 |
0x9C1 |
NodeGroup can be changed only for transition from cluster to cluster-inc |
| NSERR_NG_INVALID |
2498 |
0x9C2 |
Invalid nodegroup |
| NSERR_NOT_LAST_NODE |
2499 |
0x9C3 |
The -flushall parameter can be enabled only when there is one node in the nodegroup |
| NSERR_MULTI_NG_BINDING_EXIST |
2500 |
0x9C4 |
More than one Nodegroup has nodes bound to it |
| NSERR_INVALID_NC_CONFIG |
2501 |
0x9C5 |
The owner group parameter is applicable only when the INC parameter is enabled on the cluster instance |
| NSERR_FIPSCL_CANNOT_COEXIST |
2502 |
0x9C6 |
Clustering and FIPs configuration cannot coexist. |
| NSERR_LS_CLAG_INTF_SAME_NG |
2503 |
0x9C7 |
All interfaces of LinkSet/CLAG should belong to same nodegroup |
| NSERR_NODE_BINDING_INC |
2504 |
0x9C8 |
Node cannot be bound to Default nodeGroup on cluster-inc setup |
| NSERR_IP_OWNERDOWN_PARAM |
2522 |
0x9DA |
OwnerDownResponse allowed only for spotted SNIP on cluster |
| NSERR_INVALID_LS |
2411 |
0x96b |
Invalid linkset |
| NSERR_IP_ALREADY_OWNED |
2541 |
0x9ed |
Cannot add ip address as the address is already owned by cluster or peer node |
| NSERR_LS_UNABLE_GET_VLAN |
2542 |
0x9ee |
Unable to get the current vlan of this linkset. |
| NSERR_LS_NOT_BOUND_VLAN |
2543 |
0x9ef |
Linkset not a member of this vlan |
| NSERR_CL_UNSUPPORTED_PROTO |
2544 |
0x9f0 |
Retain connections on joining a new node is not supported for this protocol |
| NSERR_CL_UNSUPPORTED_IN_NCORE |
2545 |
0x9f1 |
This feature/option is not supported in n-core |
| NSERR_NO_SETTING_PROP |
2546 |
0x9f2 |
This setting will not be propagated to other nodes. |
| NSERR_OWNERNODE_ALLOWED_ON_CLU |
2547 |
0x9f3 |
ownerNode setting is allowed only on CLIP. |
| NSERR_CL_NOT_DFLT_NG |
2548 |
0x9f4 |
In L2 cluster, adding a node with nodegroup other than DEFAULT_NG is not permitted. |