lsndeterministicnat
Configuration for deterministic NAT resource.
Properties
(click to see Operations)
| Name | Data Type | Permissions | Description |
|---|---|---|---|
| clientname | <String> | Read-write | The name of the LSN Client. |
| network6 | <String> | Read-write | IPv6 address of the LSN subscriber or B4 device. |
| subscrip | <String> | Read-write | The Client IP address. |
| td | <Double> | Read-write | The LSN client TD.
Default value: 0
Minimum value = 0
Maximum value = 4094
|
| natip | <String> | Read-write | The NAT IP address.
Minimum length = 1
|
| natprefix | <String> | Read-only | IPv6 address of the LSN subscriber network(B4-Device) on whose traffic the Citrix ADC perform Large Scale NAT. |
| subscrip2 | <String> | Read-only | The Subscriber IP address. |
| natip2 | <String> | Read-only | The NAT IP address. |
| firstport | <Integer> | Read-only | The Application Protocol Port of the Profile.
Minimum value = 1
Maximum value = 65535
|
| lastport | <Integer> | Read-only | The Application Protocol Ending Port of the Profile.
Minimum value = 1
Maximum value = 65535
|
| srctd | <Double> | Read-only | The LSN client TD.
Minimum value = 0
Maximum value = 4094
|
| nattype | <String> | Read-only | Type of subscriber info(ex: nat44 or ds-lite).
Default value: NAT44
Possible values = NAT44, DS-Lite, NAT64
|
| __count | <Double> | Read-only | count parameter |
Operations
(click to see Properties)
Some options that you can use for each operations:
-
Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yesIf any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".
-
Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,To do this, you must specify the username and password in the request header of the NITRO request as follows:X-NITRO-USER:<username>X-NITRO-PASS:<password>Note:In such cases, make sure that the request header DOES not include the following:Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
*Note:*
Mandatory parameters are marked in redand placeholder content is marked in <green>.
get (all)
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lsndeterministicnat
Query-parameters:
args
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lsndeterministicnat?args=clientname:<String_value>,network6:<String_value>,subscrip:<String_value>,td:<Double_value>,natip:<String_value>
Use this query-parameter to get lsndeterministicnat resources based on additional properties.
attrs
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lsndeterministicnat?attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
filter
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lsndeterministicnat?filter=property-name1:property-val1,property-name2:property-val2
Use this query-parameter to get the filtered set of lsndeterministicnat resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.
view
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lsndeterministicnat?view=summary
Note:By default, the retrieved results are displayed in detail view (?view=detail).
pagination
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lsndeterministicnat?pagesize=#no;pageno=#no
Use this query-parameter to get the lsndeterministicnat resources in chunks.
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:
{ "lsndeterministicnat": [ {
clientname:<String_value>,network6:<String_value>,subscrip:<String_value>,td:<Double_value>,natip:<String_value>"natprefix":<String_value>,
"subscrip2":<String_value>,
"natip2":<String_value>,
"firstport":<Integer_value>,
"lastport":<Integer_value>,
"srctd":<Double_value>,
"nattype":<String_value>
}]}
count
URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/lsndeterministicnat?count=yes
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:
{ "lsndeterministicnat": [ { "__count": "#no"} ] }