nsdiameter

Last published : Oct 30, 2026
Configuration for Diameter Parameters resource.

Properties

(click to see Operations)
Name Data Type Permissions Description
identity <String> Read-write DiameterIdentity to be used by NS. DiameterIdentity is used to identify a Diameter node uniquely. Before setting up diameter configuration, Citrix ADC (as a Diameter node) MUST be assigned a unique DiameterIdentity.
example =>
set ns diameter -identity netscaler.com
Now whenever Citrix ADC needs to use identity in diameter messages. It will use 'netscaler.com' as Origin-Host AVP as defined in RFC3588
.
Minimum length = 1
realm <String> Read-write Diameter Realm to be used by NS.
example =>
set ns diameter -realm com
Now whenever Citrix ADC system needs to use realm in diameter messages. It will use 'com' as Origin-Realm AVP as defined in RFC3588
.
Minimum length = 1
serverclosepropagation <String> Read-write when a Server connection goes down, whether to close the corresponding client connection if there were requests pending on the server.
Default value: NO
Possible values = YES, NO
ownernode <Double> Read-write ID of the cluster node for which the diameter id is set, can be configured only through CLIP.
Default value: -1
Minimum value = 0
Maximum value = 31
__count <Double> Read-only count parameter

Operations

(click to see Properties)
Some options that you can use for each operations:
  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:
    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes
    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".
  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
    To do this, you must specify the username and password in the request header of the NITRO request as follows:
    X-NITRO-USER:<username>
    X-NITRO-PASS:<password>
    Note:In such cases, make sure that the request header DOES not include the following:
    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>
*Note:*
Mandatory parameters are marked in redand placeholder content is marked in <green>.

update

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nsdiameter
HTTP Method:PUT
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json
Request Payload:

{"nsdiameter":{
"identity":<String_value>,
"realm":<String_value>,
"serverclosepropagation":<String_value>,
"ownernode":<Double_value>
}}
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

unset

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nsdiameter?action=unset
HTTP Method:POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json
Request Payload:

{"nsdiameter":{
"serverclosepropagation":true,
"ownernode":<Double_value>
}}
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nsdiameter
Query-parameters:
attrs
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nsdiameter?attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
filter
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nsdiameter?filter=property-name1:property-val1,property-name2:property-val2
Use this query-parameter to get the filtered set of nsdiameter resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.
view
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nsdiameter?view=summary
Note:By default, the retrieved results are displayed in detail view (?view=detail).
pagination
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nsdiameter?pagesize=#no;pageno=#no
Use this query-parameter to get the nsdiameter resources in chunks.
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:

{ "nsdiameter": [ {
"ownernode":<Double_value>,
"identity":<String_value>,
"realm":<String_value>,
"serverclosepropagation":<String_value>
}]}

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nsdiameter/ownernode_value<Double>
Query-parameters:
attrs
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nsdiameter/ownernode_value<Double>?attrs=property-name1,property-name2
Use this query parameter to specify the resource details that you want to retrieve.
view
http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nsdiameter/ownernode_value<Double>?view=summary
Note:By default, the retrieved results are displayed in detail view (?view=detail).
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:

{ "nsdiameter": [ {
"ownernode":<Double_value>,
"identity":<String_value>,
"realm":<String_value>,
"serverclosepropagation":<String_value>
}]}

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nsdiameter?count=yes
HTTP Method:GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json
Response:
HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:
Content-Type:application/json
Response Payload:

{ "nsdiameter": [ { "__count": "#no"} ] }