ADC CLI Commands

help

The following operations can be performed on “help”:

help

Use this command to display help information for a CLI command, for a group of commands, or for all CLI commands.

Synopsis

help [(commandName) -all]

Arguments

commandName The name of a command for which you want full usage information.

groupName The name of a command group for which you want basic usage information.

all Use this option to request basic usage information for all commands.

Example

1.To view help information for adding a virtual server, enter the following CLI command: help add vserver The following information is displayed: Usage: add vserver \[ port>] \[-type \( CONTENT | ADDRESS )] \[-cacheType ] \[-backupVServerName ] \[-redirectURL ] \[-cacheable \( ON | OFF )] \[-state \( ENABLED | DISABLED )]

where: serviceType = ( HTTP | FTP | TCP | UDP | SSL | SSL_BRIDGE | SSL_TCP | NNTP| DNS | ANY )

= \( TRANSPARENT | REVERSE | FORWARD ) Done 2.To view help information for all DNS commands, enter the following command: help dns The following information is displayed: add aaaaRec ... [-TTL ] rm aaaaRec [ ...] show aaaaRec \[ | -type ] add addRec ... [-TTL ] [-private ] rm addRec [ ...] show addRec \[ | -type ] add cnameRec [-TTL ] rm cnameRec show cnameRec \[ | -type ] add mxRec -mx -pref [-TTL ] rm mxRec set mxRec -mx [-pref ] [-TTL ] show mxRec \[ | -type ] add nsRec [-p ] [-s ] [-TTL ] rm nsRec \[-p | -s ] show nsRec \[ | -type ] set dns parameter \[-timeout ] \[-retries <positive\_integer>] \[-minTTL ] \[-maxTTL ] \[-TTL \( ENABLED | DISABLED )] \[-cacheRecords \( YES | NO )] show dns parameter add soaRec -contact -serial -refresh -retry -expire -minimum -TTL rm soaRec set soaRec [-contact ] [-serial ][-refresh ] [-retry ] [-expire ] [-minimum ][-TTL ] show soaRec \[ | -type ] add dns ptrRec ... [-TTL ] rm dns ptrRec [ ...] show dns ptrRec \[ | -type ] add dns srvRec -priority -weight -port rm dns srvRec [ ...] set dns srvRec [-priority ] [-weight ] [-port ] [-TTL ] show dns srvRec \[\( \[]) | -type ] Done
help