-
-
-
appflowparam
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
videooptimizationdetectionpolicylabel_videooptimizationdetectionpolicy_binding
-
videooptimizationdetectionpolicy_videooptimizationglobaldetection_binding
-
videooptimizationglobaldetection_videooptimizationdetectionpolicy_binding
-
videooptimizationglobalpacing_videooptimizationpacingpolicy_binding
-
videooptimizationpacingpolicylabel_videooptimizationpacingpolicy_binding
-
videooptimizationpacingpolicy_videooptimizationglobalpacing_binding
-
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
appflowparam
Configuration for AppFlow parameter resource.
Properties
(click to see Operations )
| Name | Data Type | Permissions | Description |
|---|---|---|---|
| templaterefresh |
|
Read-write | Refresh interval, in seconds, at which to export the template data. Because data transmission is in UDP, the templates must be resent at regular intervals.
Default value: 600 Minimum value = 60 Maximum value = 3600 |
| appnamerefresh |
|
Read-write | Interval, in seconds, at which to send Appnames to the configured collectors. Appname refers to the name of an entity (virtual server, service, or service group) in the Citrix ADC.
Default value: 600 Minimum value = 60 Maximum value = 3600 |
| flowrecordinterval |
|
Read-write | Interval, in seconds, at which to send flow records to the configured collectors.
Default value: 60 Minimum value = 60 Maximum value = 3600 |
| securityinsightrecordinterval |
|
Read-write | Interval, in seconds, at which to send security insight flow records to the configured collectors.
Default value: 600 Minimum value = 60 Maximum value = 3600 |
| udppmtu |
|
Read-write | MTU, in bytes, for IPFIX UDP packets.
Default value: 1472 Minimum value = 128 Maximum value = 1472 |
| httpurl |
|
Read-write | Include the http URL that the Citrix ADC received from the client.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| aaausername |
|
Read-write | Enable AppFlow AAA Username logging.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| httpcookie |
|
Read-write | Include the cookie that was in the HTTP request the appliance received from the client.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| httpreferer |
|
Read-write | Include the web page that was last visited by the client.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| httpmethod |
|
Read-write | Include the method that was specified in the HTTP request that the appliance received from the client.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| httphost |
|
Read-write | Include the host identified in the HTTP request that the appliance received from the client.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| httpuseragent |
|
Read-write | Include the client application through which the HTTP request was received by the Citrix ADC.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| clienttrafficonly |
|
Read-write | Generate AppFlow records for only the traffic from the client.
Default value: NO Possible values = YES, NO |
| httpcontenttype |
|
Read-write | Include the HTTP Content-Type header sent from the server to the client to determine the type of the content sent.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| httpauthorization |
|
Read-write | Include the HTTP Authorization header information.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| httpvia |
|
Read-write | Include the httpVia header which contains the IP address of proxy server through which the client accessed the server.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| httpxforwardedfor |
|
Read-write | Include the httpXForwardedFor header, which contains the original IP Address of the client using a proxy server to access the server.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| httplocation |
|
Read-write | Include the HTTP location headers returned from the HTTP responses.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| httpsetcookie |
|
Read-write | Include the Set-cookie header sent from the server to the client in response to a HTTP request.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| httpsetcookie2 |
|
Read-write | Include the Set-cookie header sent from the server to the client in response to a HTTP request.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| connectionchaining |
|
Read-write | Enable connection chaining so that the client server flows of a connection are linked. Also the connection chain ID is propagated across Citrix ADCs, so that in a multi-hop environment the flows belonging to the same logical connection are linked. This id is also logged as part of appflow record.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| httpdomain |
|
Read-write | Include the http domain request to be exported.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| skipcacheredirectionhttptransaction |
|
Read-write | Skip Cache http transaction. This HTTP transaction is specific to Cache Redirection module. In Case of Cache Miss there will be another HTTP transaction initiated by the cache server.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| identifiername |
|
Read-write | Include the stream identifier name to be exported.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| identifiersessionname |
|
Read-write | Include the stream identifier session name to be exported.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| observationdomainid |
|
Read-write | An observation domain groups a set of Citrix ADCs based on deployment: cluster, HA etc. A unique Observation Domain ID is required to be assigned to each such group.
Default value: 0 Minimum value = 1000 |
| observationdomainname |
|
Read-write | Name of the Observation Domain defined by the observation domain ID.
Maximum length = 127 |
| subscriberawareness |
|
Read-write | Enable this option for logging end user MSISDN in L4/L7 appflow records.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| subscriberidobfuscation |
|
Read-write | Enable this option for obfuscating MSISDN in L4/L7 appflow records.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| subscriberidobfuscationalgo |
|
Read-write | Algorithm(MD5 or SHA256) to be used for obfuscating MSISDN.
Default value: MD5 Possible values = MD5, SHA256 |
| gxsessionreporting |
|
Read-write | Enable this option for Gx session reporting.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| securityinsighttraffic |
|
Read-write | Enable/disable the feature individually on appflow action.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| cacheinsight |
|
Read-write | Flag to determine whether cache records need to be exported or not. If this flag is true and IC is enabled, cache records are exported instead of L7 HTTP records.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| videoinsight |
|
Read-write | Enable/disable the feature individually on appflow action.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| httpquerywithurl |
|
Read-write | Include the HTTP query segment along with the URL that the Citrix ADC received from the client.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| urlcategory |
|
Read-write | Include the URL category record.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| lsnlogging |
|
Read-write | On enabling this option, the Citrix ADC will send the Large Scale Nat(LSN) records to the configured collectors.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| cqareporting |
|
Read-write | TCP CQA reporting enable/disable knob.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| emailaddress |
|
Read-write | Enable AppFlow user email-id logging.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| usagerecordinterval |
|
Read-write | On enabling this option, the NGS will send bandwidth usage record to configured collectors.
Default value: 0 Minimum value = 0 Maximum value = 7200 |
| websaasappusagereporting |
|
Read-write | On enabling this option, NGS will send data used by Web/saas app at the end of every HTTP transaction to configured collectors.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| metrics |
|
Read-write | Enable Citrix ADC Stats to be sent to the Telemetry Agent.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| events |
|
Read-write | Enable Events to be sent to the Telemetry Agent.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| auditlogs |
|
Read-write | Enable Auditlogs to be sent to the Telemetry Agent.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| observationpointid |
|
Read-write | An observation point ID is identifier for the NetScaler from which appflow records are being exported. By default, the NetScaler IP is the observation point ID.
Minimum value = 1 |
| distributedtracing |
|
Read-write | Enable generation of the distributed tracing templates in the Appflow records.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| disttracingsamplingrate |
|
Read-write | Sampling rate for Distributed Tracing.
Default value: 0 Minimum value = 0 Maximum value = 100 |
| tcpattackcounterinterval |
|
Read-write | Interval, in seconds, at which to send tcp attack counters to the configured collectors. If 0 is configured, the record is not sent.
Default value: 0 Minimum value = 0 Maximum value = 3600 |
| logstreamovernsip |
|
Read-write | To use the Citrix ADC IP to send Logstream records instead of the SNIP.
Default value: DISABLED Possible values = ENABLED, DISABLED |
| aaainsight |
|
Read-write | Enable/Disable AAA insights.
Default value: ENABLED Possible values = ENABLED, DISABLED |
| builtin | <String[]> | Read-only | Flag to determine if the appflow param is built-in or not.
Possible values = MODIFIABLE, DELETABLE, IMMUTABLE, PARTITION_ALL |
| feature |
|
Read-only | The feature to be checked while applying this config. |
| tcpburstreporting |
|
Read-only | TCP burst reporting enable/disable knob.
Default value: ENABLED Possible values = ENABLED, DISABLED |
| tcpburstreportingthreshold |
|
Read-only | TCP burst reporting threshold.
Default value: 1500 Minimum value = 10 Maximum value = 5000 |
Operations
(click to see Properties )
- UPDATE
- UNSET
- GET (ALL)
Some options that you can use for each operations:
-
Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
-
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
*Note:
*
Mandatory parameters are marked in red and placeholder content is marked in green
update
URL: http:// <netscaler-ip-address> /nitro/v1/config/appflowparam
HTTP Method: PUT
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Content-Type:application/json
Request Payload:
{"appflowparam":{
"templaterefresh":<Double_value>,
"appnamerefresh":<Double_value>,
"flowrecordinterval":<Double_value>,
"securityinsightrecordinterval":<Double_value>,
"udppmtu":<Double_value>,
"httpurl":<String_value>,
"aaausername":<String_value>,
"httpcookie":<String_value>,
"httpreferer":<String_value>,
"httpmethod":<String_value>,
"httphost":<String_value>,
"httpuseragent":<String_value>,
"clienttrafficonly":<String_value>,
"httpcontenttype":<String_value>,
"httpauthorization":<String_value>,
"httpvia":<String_value>,
"httpxforwardedfor":<String_value>,
"httplocation":<String_value>,
"httpsetcookie":<String_value>,
"httpsetcookie2":<String_value>,
"connectionchaining":<String_value>,
"httpdomain":<String_value>,
"skipcacheredirectionhttptransaction":<String_value>,
"identifiername":<String_value>,
"identifiersessionname":<String_value>,
"observationdomainid":<Double_value>,
"observationdomainname":<String_value>,
"subscriberawareness":<String_value>,
"subscriberidobfuscation":<String_value>,
"subscriberidobfuscationalgo":<String_value>,
"gxsessionreporting":<String_value>,
"securityinsighttraffic":<String_value>,
"cacheinsight":<String_value>,
"videoinsight":<String_value>,
"httpquerywithurl":<String_value>,
"urlcategory":<String_value>,
"lsnlogging":<String_value>,
"cqareporting":<String_value>,
"emailaddress":<String_value>,
"usagerecordinterval":<Double_value>,
"websaasappusagereporting":<String_value>,
"metrics":<String_value>,
"events":<String_value>,
"auditlogs":<String_value>,
"observationpointid":<Double_value>,
"distributedtracing":<String_value>,
"disttracingsamplingrate":<Double_value>,
"tcpattackcounterinterval":<Double_value>,
"logstreamovernsip":<String_value>,
"aaainsight":<String_value>
}}
<!--NeedCopy-->
Response:
HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
unset
URL: http:// <netscaler-ip-address> /nitro/v1/config/appflowparam? action=unset
HTTP Method: POST
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Content-Type:application/json
Request Payload:
{"appflowparam":{
"templaterefresh":true,
"appnamerefresh":true,
"flowrecordinterval":true,
"securityinsightrecordinterval":true,
"udppmtu":true,
"httpurl":true,
"aaausername":true,
"httpcookie":true,
"httpreferer":true,
"httpmethod":true,
"httphost":true,
"httpuseragent":true,
"clienttrafficonly":true,
"httpcontenttype":true,
"httpauthorization":true,
"httpvia":true,
"httpxforwardedfor":true,
"httplocation":true,
"httpsetcookie":true,
"httpsetcookie2":true,
"connectionchaining":true,
"httpdomain":true,
"skipcacheredirectionhttptransaction":true,
"identifiername":true,
"identifiersessionname":true,
"observationdomainid":true,
"observationdomainname":true,
"subscriberawareness":true,
"subscriberidobfuscation":true,
"subscriberidobfuscationalgo":true,
"gxsessionreporting":true,
"securityinsighttraffic":true,
"cacheinsight":true,
"videoinsight":true,
"httpquerywithurl":true,
"urlcategory":true,
"lsnlogging":true,
"cqareporting":true,
"emailaddress":true,
"usagerecordinterval":true,
"websaasappusagereporting":true,
"metrics":true,
"events":true,
"auditlogs":true,
"observationpointid":true,
"distributedtracing":true,
"disttracingsamplingrate":true,
"tcpattackcounterinterval":true,
"logstreamovernsip":true,
"aaainsight":true
}}
<!--NeedCopy-->
Response:
HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
get (all)
URL: http:// <netscaler-ip-address> /nitro/v1/config/appflowparam
HTTP Method: GET
Request Headers:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
Accept:application/json
Response:
HTTP Status Code on Success: 200 OK
HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error
Response Header:
Content-Type:application/json
Response Payload:
{ "appflowparam": [ {
"templaterefresh":<Double_value>,
"appnamerefresh":<Double_value>,
"flowrecordinterval":<Double_value>,
"securityinsightrecordinterval":<Double_value>,
"udppmtu":<Double_value>,
"httpurl":<String_value>,
"aaausername":<String_value>,
"httpcookie":<String_value>,
"httpreferer":<String_value>,
"httpmethod":<String_value>,
"httphost":<String_value>,
"httpuseragent":<String_value>,
"clienttrafficonly":<String_value>,
"httpcontenttype":<String_value>,
"httpauthorization":<String_value>,
"httpvia":<String_value>,
"httpxforwardedfor":<String_value>,
"httplocation":<String_value>,
"httpsetcookie":<String_value>,
"httpsetcookie2":<String_value>,
"connectionchaining":<String_value>,
"httpdomain":<String_value>,
"skipcacheredirectionhttptransaction":<String_value>,
"identifiername":<String_value>,
"identifiersessionname":<String_value>,
"observationdomainid":<Double_value>,
"observationpointid":<Double_value>,
"observationdomainname":<String_value>,
"builtin":<String[]_value>,
"feature":<String_value>,
"securityinsighttraffic":<String_value>,
"subscriberawareness":<String_value>,
"subscriberidobfuscation":<String_value>,
"subscriberidobfuscationalgo":<String_value>,
"gxsessionreporting":<String_value>,
"cacheinsight":<String_value>,
"videoinsight":<String_value>,
"httpquerywithurl":<String_value>,
"tcpburstreporting":<String_value>,
"tcpburstreportingthreshold":<Double_value>,
"urlcategory":<String_value>,
"lsnlogging":<String_value>,
"cqareporting":<String_value>,
"emailaddress":<String_value>,
"usagerecordinterval":<Double_value>,
"websaasappusagereporting":<String_value>,
"metrics":<String_value>,
"events":<String_value>,
"auditlogs":<String_value>,
"distributedtracing":<String_value>,
"disttracingsamplingrate":<Double_value>,
"tcpattackcounterinterval":<Double_value>,
"logstreamovernsip":<String_value>,
"aaainsight":<String_value>
}]}
<!--NeedCopy-->
Share
Share
In this article
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.