ADC NITRO APIs

lbsipparameters

August 17, 2023

Contributed by:

Configuration for SIP parameters resource.

Properties

(click to see Operations )

Name	Data Type	Permissions	Description
rnatsrcport		Read-write	Port number with which to match the source port in server-initiated SIP traffic. The rport parameter is added, without a value, to SIP packets that have a matching source port number, and CALL-ID based persistence is implemented for the responses received by the virtual server. Default value: 0
rnatdstport		Read-write	Port number with which to match the destination port in server-initiated SIP traffic. The rport parameter is added, without a value, to SIP packets that have a matching destination port number, and CALL-ID based persistence is implemented for the responses received by the virtual server. Default value: 0
retrydur		Read-write	Time, in seconds, for which a client must wait before initiating a connection after receiving a 503 Service Unavailable response from the SIP server. The time value is sent in the “Retry-After” header in the 503 response. Default value: 120 Minimum value = 1
addrportvip		Read-write	Add the rport parameter to the VIA headers of SIP requests that virtual servers receive from clients or servers. Default value: ENABLED Possible values = ENABLED, DISABLED
sip503ratethreshold		Read-write	Maximum number of 503 Service Unavailable responses to generate, once every 10 milliseconds, when a SIP virtual server becomes unavailable. Default value: 100
rnatsecuresrcport		Read-write	Port number with which to match the source port in server-initiated SIP over SSL traffic. The rport parameter is added, without a value, to SIP packets that have a matching source port number, and CALL-ID based persistence is implemented for the responses received by the virtual server. Default value: 0 Range 1 - 65535 * in CLI is represented as 65535 in NITRO API
rnatsecuredstport		Read-write	Port number with which to match the destination port in server-initiated SIP over SSL traffic. The rport parameter is added, without a value, to SIP packets that have a matching destination port number, and CALL-ID based persistence is implemented for the responses received by the virtual server. Default value: 0 Range 1 - 65535 * in CLI is represented as 65535 in NITRO API
builtin	<String[]>	Read-only	Flag to determine if SIP param is built-in or not. Possible values = MODIFIABLE, DELETABLE, IMMUTABLE, PARTITION_ALL
feature		Read-only	The feature to be checked while applying this config.

Operations

(click to see Properties )

UPDATE
UNSET
GET (ALL)

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:*

Mandatory parameters are marked in red and placeholder content is marked in green

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbsipparameters

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"lbsipparameters":{
      "rnatsrcport":<Integer_value>,
      "rnatdstport":<Integer_value>,
      "retrydur":<Integer_value>,
      "addrportvip":<String_value>,
      "sip503ratethreshold":<Double_value>,
      "rnatsecuresrcport":<Integer_value>,
      "rnatsecuredstport":<Integer_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbsipparameters? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"lbsipparameters":{
      "rnatsrcport":true,
      "rnatdstport":true,
      "retrydur":true,
      "addrportvip":true,
      "sip503ratethreshold":true,
      "rnatsecuresrcport":true,
      "rnatsecuredstport":true
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbsipparameters

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "lbsipparameters": [ {
      "rnatsrcport":<Integer_value>,
      "rnatdstport":<Integer_value>,
      "retrydur":<Integer_value>,
      "addrportvip":<String_value>,
      "sip503ratethreshold":<Double_value>,
      "rnatsecuresrcport":<Integer_value>,
      "rnatsecuredstport":<Integer_value>,
      "builtin":<String[]_value>,
      "feature":<String_value>
}]}

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

lbsipparameters

August 17, 2023

Contributed by:

August 17, 2023

Contributed by:

lbsipparameters

Properties

Operations

update

unset

get (all)

In this article