ADC NITRO APIs

appfwtransactionrecords

August 17, 2023

Contributed by:

Configuration for Application firewall transaction record resource.

Properties

(click to see Operations )

Name	Permissions	Description
nodeid	Read-write	Unique number that identifies the cluster node. Minimum value = 0 Maximum value = 31
httptransactionid	Read-only	The http transaction identifier.
packetengineid	Read-only	The packet engine identifier.
appfwsessionid	Read-only	The session identifier set by the Application Firewall to track the user session.
profilename	Read-only	Application Firewall profile name.
url	Read-only	Request URL.
clientip	Read-only	The IP address of client.
destip	Read-only	The IP address of destination.
starttime	Read-only	Conveys time at which request processing started.
endtime	Read-only	Conveys time at which request processing end.
requestcontentlength	Read-only	The content length of request.
requestyields	Read-only	The number of times yielded during request processing to send heart beat packets.
requestmaxprocessingtime	Read-only	The maximum processing time across yields during request processing.
responsecontentlength	Read-only	The content length of response.
responseyields	Read-only	The number of times yielded during response processing to send heart beat packets.
responsemaxprocessingtime	Read-only	The maximum processing time across yields during response processing.
__count	Read-only	count parameter

Operations

(click to see Properties )

GET (ALL)
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:*

Mandatory parameters are marked in red and placeholder content is marked in green

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/appfwtransactionrecords

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/config/appfwtransactionrecords? args=nodeid: <Double_value>

Use this query-parameter to get appfwtransactionrecords resources based on additional properties.

attrs

http:// <netscaler-ip-address> /nitro/v1/config/appfwtransactionrecords? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/appfwtransactionrecords? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of appfwtransactionrecords resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/appfwtransactionrecords? view=summary

Use this query-parameter to get the summary output of appfwtransactionrecords resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/appfwtransactionrecords? pagesize=#no;pageno=#no

Use this query-parameter to get the appfwtransactionrecords resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "appfwtransactionrecords": [ {
nodeid:<Double_value>      "httptransactionid":<Double_value>,
      "packetengineid":<Integer_value>,
      "appfwsessionid":<String_value>,
      "profilename":<String_value>,
      "url":<String_value>,
      "clientip":<String_value>,
      "destip":<String_value>,
      "starttime":<String_value>,
      "endtime":<String_value>,
      "requestcontentlength":<Integer_value>,
      "requestyields":<Double_value>,
      "requestmaxprocessingtime":<Double_value>,
      "responsecontentlength":<Integer_value>,
      "responseyields":<Double_value>,
      "responsemaxprocessingtime":<Double_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/appfwtransactionrecords? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "appfwtransactionrecords": [ { "__count": "#no"} ] }

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

appfwtransactionrecords

August 17, 2023

Contributed by:

August 17, 2023

Contributed by:

appfwtransactionrecords

Properties

Operations

get (all)

count

In this article