ADC NITRO APIs

lsnsession

August 17, 2023

Contributed by:

Configuration for lsn session resource.

Properties

(click to see Operations )

Name	Permissions	Description
nattype	Read-write	Type of sessions to be displayed. Default value: NAT44 Possible values = NAT44, DS-Lite, NAT64
clientname	Read-write	Name of the LSN Client entity.
network	Read-write	IP address or network address of subscriber(s).
netmask	Read-write	Subnet mask for the IP address specified by the network parameter.
network6	Read-write	IPv6 address of the LSN subscriber or B4 device.
td	Read-write	Traffic domain ID of the LSN client entity. Default value: 0 Minimum value = 0 Maximum value = 4094
natip	Read-write	Mapped NAT IP address used in LSN sessions.
nodeid	Read-write	Unique number that identifies the cluster node. Minimum value = 0 Maximum value = 31
natport2	Read-write	Mapped NAT port used in the LSN sessions.
natprefix	Read-only	IPv6 address of the LSN subscriber(s) or subscriber network(B4-Device) on whose traffic the Citrix ADC perform Large Scale NAT.
subscrip	Read-only	The Source IP address.
subscrport	Read-only	The Source Port.
destip	Read-only	The Destination IP address.
destport	Read-only	The Destination Port.
natport	Read-only	The NAT Port.
transportprotocol	Read-only	The Transport Protocol for the session. Possible values = TCP, UDP, ICMP
sessionestdir	Read-only	The Session establishment direction, session was established for outbound or inbound packet. Possible values = OUT, IN
dsttd	Read-only	.
srctd	Read-only	.
ipv6address	Read-only	IPv6 address of v6 vserver.
__count	Read-only	count parameter

Operations

(click to see Properties )

GET (ALL)
COUNT
FLUSH

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:*

Mandatory parameters are marked in red and placeholder content is marked in green

flush

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? action=flush

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"lsnsession":{
      "nattype":<String_value>,
      "clientname":<String_value>,
      "network":<String_value>,
      "netmask":<String_value>,
      "network6":<String_value>,
      "td":<Double_value>,
      "natip":<String_value>,
      "natport2":<Integer_value>,
      "nodeid":<Double_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnsession

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? args=nattype: <String_value> ,clientname: <String_value> ,network: <String_value> ,netmask: <String_value> ,network6: <String_value> ,td: <Double_value> ,natip: <String_value> ,nodeid: <Double_value>

Use this query-parameter to get lsnsession resources based on additional properties.

attrs

http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of lsnsession resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? view=summary

Use this query-parameter to get the summary output of lsnsession resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? pagesize=#no;pageno=#no

Use this query-parameter to get the lsnsession resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "lsnsession": [ {
nattype:<String_value>,clientname:<String_value>,network:<String_value>,netmask:<String_value>,network6:<String_value>,td:<Double_value>,natip:<String_value>,nodeid:<Double_value>      "natprefix":<String_value>,
      "subscrip":<String_value>,
      "subscrport":<Integer_value>,
      "destip":<String_value>,
      "destport":<Integer_value>,
      "natport":<Integer_value>,
      "transportprotocol":<String_value>,
      "sessionestdir":<String_value>,
      "dsttd":<Double_value>,
      "srctd":<Double_value>,
      "ipv6address":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "lsnsession": [ { "__count": "#no"} ] }

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

lsnsession

August 17, 2023

Contributed by:

August 17, 2023

Contributed by:

lsnsession

Properties

Operations

flush

get (all)

count

In this article