ADC NITRO APIs

botprofile_ratelimit_binding

August 17, 2023

Contributed by:

Binding object showing the ratelimit that can be bound to botprofile.

Properties

(click to see Operations )

Name	Data Type	Permissions	Description
timeslice		Read-write	Time interval during which requests are tracked to check if they cross the given rate. Minimum value = 1000 Maximum value = 10000000
rate		Read-write	Maximum number of requests that are allowed in this session in the given period time. Minimum value = 1000 Maximum value = 10000000
cookiename		Read-write	Cookie name which is used to identify the session for session rate-limiting.
bot_rate_limit_enabled		Read-write	Enable or disable rate-limit binding. Default value: OFF Possible values = ON, OFF
bot_rate_limit_type		Read-write	Rate-limiting type Following rate-limiting types are allowed SOURCE_IP - Rate-limiting based on the client IP. SESSION - Rate-limiting based on the configured cookie name. *URL - Rate-limiting based on the configured URL. Possible values = SESSION, SOURCE_IP, URL
name		Read-write	Name for the profile. Must begin with a letter, number, or the underscore character (), and must contain only letters, numbers, and the hyphen (-), period (.), pound (#), space ( ), at (@), equals (=), colon (:), and underscore () characters. Cannot be changed after the profile is added.The following requirement applies only to the Citrix ADC CLI If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my profile” or ‘my profile’). Minimum length = 1 Maximum length = 31
bot_rate_limit_action	<String[]>	Read-write	One or more actions to be taken when the current rate becomes more than the configured rate. Only LOG action can be combined with DROP, REDIRECT or RESET action. Default value: NONE Possible values = NONE, LOG, DROP, REDIRECT, RESET
bot_bind_comment		Read-write	Any comments about this binding. Minimum length = 1
bot_ratelimit		Read-write	Rate-limit binding. Maximum 30 bindings can be configured per profile for rate-limit detection. For SESSION and IP_BASED types, only one binding can be configured. For these types, if a binding exists and another binding is configured then the previous binding information is removed. For URL type, only one binding is allowed per URL. Also, for URL type, previous binding information is removed if another binding is configured for the same URL.
logmessage		Read-write	Message to be logged for this binding. Minimum length = 1
bot_rate_limit_url		Read-write	URL for the resource based rate-limiting.
__count		Read-write	count parameter

Operations

(click to see Properties )

ADD
DELETE
GET
GET (ALL)
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:*

Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address /nitro/v1/config/botprofile_ratelimit_binding

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{
"botprofile_ratelimit_binding":{
<b>      "name":<String_value>,
</b>      "bot_ratelimit":<Boolean_value>,
      "bot_rate_limit_type":<String_value>,
      "bot_rate_limit_url":<String_value>,
      "cookiename":<String_value>,
      "rate":<Double_value>,
      "timeslice":<Double_value>,
      "bot_rate_limit_action":<String[]_value>,
      "bot_rate_limit_enabled":<String_value>,
      "logmessage":<String_value>,
      "bot_bind_comment":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile_ratelimit_binding/ name_value<String>

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/config/botprofile_ratelimit_binding/ name_value<String> ? args=bot_ratelimit: <Boolean_value> ,bot_rate_limit_type: <String_value> ,bot_rate_limit_url: <String_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile_ratelimit_binding/ name_value<String>

Query-parameters:

filter

http:// <netscaler-ip-address> /nitro/v1/config/botprofile_ratelimit_binding/ name_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of botprofile_ratelimit_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination

http:// <netscaler-ip-address> /nitro/v1/config/botprofile_ratelimit_binding/ name_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the botprofile_ratelimit_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "botprofile_ratelimit_binding": [ {
      "timeslice":<Double_value>,
      "rate":<Double_value>,
      "cookiename":<String_value>,
      "bot_rate_limit_enabled":<String_value>,
      "bot_rate_limit_type":<String_value>,
      "name":<String_value>,
      "bot_rate_limit_action":<String[]_value>,
      "bot_bind_comment":<String_value>,
      "bot_ratelimit":<Boolean_value>,
      "logmessage":<String_value>,
      "bot_rate_limit_url":<String_value>
}]}

<!--NeedCopy-->

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile_ratelimit_binding

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters:

bulkbindings

http:// <netscaler-ip-address> /nitro/v1/config/botprofile_ratelimit_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "botprofile_ratelimit_binding": [ {
      "timeslice":<Double_value>,
      "rate":<Double_value>,
      "cookiename":<String_value>,
      "bot_rate_limit_enabled":<String_value>,
      "bot_rate_limit_type":<String_value>,
      "name":<String_value>,
      "bot_rate_limit_action":<String[]_value>,
      "bot_bind_comment":<String_value>,
      "bot_ratelimit":<Boolean_value>,
      "logmessage":<String_value>,
      "bot_rate_limit_url":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile_ratelimit_binding/ name_value<String> ? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"botprofile_ratelimit_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

botprofile_ratelimit_binding

August 17, 2023

Contributed by:

August 17, 2023

Contributed by:

botprofile_ratelimit_binding

Properties

Operations

add

delete

get

get (all)

count

In this article