ADC NITRO APIs

contentinspectionaction

August 17, 2023

Contributed by:

Configuration for Content Inspection action resource.

Properties

(click to see Operations )

Name	Data Type	Permissions	Description
name		Read-write	Name of the remote service action. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters.
type		Read-write	Type of operation this action is going to perform. following actions are available to configure ICAP - forward the incoming request or response to an ICAP server for modification. INLINEINSPECTION - forward the incoming or outgoing packets to IPS server for Intrusion Prevention. MIRROR - Forwards cloned packets for Intrusion Detection. NOINSPECTION - This does not forward incoming and outgoing packets to the Inspection device. NSTRACE - capture current and further incoming packets on this transaction. Possible values = ICAP, INLINEINSPECTION, MIRROR, NOINSPECTION
servername		Read-write	Name of the LB vserver or service. Minimum length = 1 Maximum length = 127
serverip		Read-write	IP address of remoteService. Minimum length = 1
serverport		Read-write	Port of remoteService. Default value: 1344 Minimum value = 1 Maximum value = 65535
icapprofilename		Read-write	Name of the ICAP profile to be attached to the contentInspection action. Minimum length = 1 Maximum length = 127
ifserverdown		Read-write	Name of the action to perform if the Vserver representing the remote service is not UP. This is not supported for NOINSPECTION Type. The Supported actions are RESET - Reset the client connection by closing it. The client program, such as a browser, will handle this and may inform the user. The client may then resend the request if desired. DROP - Drop the request without sending a response to the user. CONTINUE - It bypasses the ContentIsnpection and Continues/resumes the Traffic-Flow to Client/Server. Default value: RESET Possible values = CONTINUE, DROP, RESET
reqtimeout		Read-only	Time, in seconds, within which the remote service request must complete. This is not supported for NOINSPECTION action type. If the request does not complete within this time, the specified request timeout action is executed. Zero disables the timeout. Default value: 0 Minimum value = 0 Maximum value = 86400
reqtimeoutaction		Read-only	Name of the action to perform if the Vserver representing the remote service does not respond. This is not supported for NOINSPECTION action type. There are also some built-in actions which can be used. These are RESET - Reset the client connection by closing it. The client program, such as a browser, will handle this and may inform the user. The client may then resend the request if desired. DROP - Drop the request without sending a response to the user. Default value: BYPASS Possible values = BYPASS, DROP, RESET
hits		Read-only	The number of times the action has been taken.
referencecount		Read-only	The number of references to the action.
undefhits		Read-only	The number of times the action resulted in UNDEF.
builtin	<String[]>	Read-only	Flag to determine whether contentinspection action is built-in or not. Possible values = MODIFIABLE, DELETABLE, IMMUTABLE, PARTITION_ALL
feature		Read-only	The feature to be checked while applying this config.
__count		Read-only	count parameter

Operations

(click to see Properties )

ADD
GET (ALL)
GET
COUNT
UPDATE
UNSET
DELETE

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:*

Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionaction

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"contentinspectionaction":{
<b>      "name":<String_value>,
</b><b>      "type":<String_value>,
</b>      "servername":<String_value>,
      "serverip":<String_value>,
      "serverport":<Double_value>,
      "icapprofilename":<String_value>,
      "ifserverdown":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionaction

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"contentinspectionaction":{
<b>      "name":<String_value>,
</b>      "servername":<String_value>,
      "serverip":<String_value>,
      "serverport":<Double_value>,
      "icapprofilename":<String_value>,
      "ifserverdown":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionaction? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"contentinspectionaction":{
<b>      "name":<String_value>,
</b>      "serverport":true,
      "ifserverdown":true
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionaction/ name_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionaction

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionaction? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionaction? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of contentinspectionaction resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionaction? view=summary

Use this query-parameter to get the summary output of contentinspectionaction resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionaction? pagesize=#no;pageno=#no

Use this query-parameter to get the contentinspectionaction resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "contentinspectionaction": [ {
      "name":<String_value>,
      "type":<String_value>,
      "servername":<String_value>,
      "serverip":<String_value>,
      "serverport":<Double_value>,
      "icapprofilename":<String_value>,
      "ifserverdown":<String_value>,
      "reqtimeout":<Double_value>,
      "reqtimeoutaction":<String_value>,
      "hits":<Double_value>,
      "referencecount":<Double_value>,
      "undefhits":<Double_value>,
      "builtin":<String[]_value>,
      "feature":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionaction/ name_value<String>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionaction/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionaction/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of contentinspectionaction resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "contentinspectionaction": [ {
      "name":<String_value>,
      "type":<String_value>,
      "servername":<String_value>,
      "serverip":<String_value>,
      "serverport":<Double_value>,
      "icapprofilename":<String_value>,
      "ifserverdown":<String_value>,
      "reqtimeout":<Double_value>,
      "reqtimeoutaction":<String_value>,
      "hits":<Double_value>,
      "referencecount":<Double_value>,
      "undefhits":<Double_value>,
      "builtin":<String[]_value>,
      "feature":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionaction? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "contentinspectionaction": [ { "__count": "#no"} ] }

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

contentinspectionaction

August 17, 2023

Contributed by:

August 17, 2023

Contributed by:

contentinspectionaction

Properties

Operations

add

update

unset

delete

get (all)

get

count

In this article