ADC NITRO APIs

crvserver

August 17, 2023

Contributed by:

Configuration for CR virtual server resource.

Properties

(click to see Operations )

Name	Permissions	Description
name	Read-write	Name for the cache redirection virtual server. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at sign (@), equal sign (=), and hyphen (-) characters. Can be changed after the cache redirection virtual server is created. The following requirement applies only to the Citrix ADC CLI If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my server” or ‘my server’). Minimum length = 1
td	Read-write	Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. Minimum value = 0 Maximum value = 4094
servicetype	Read-write	Protocol (type of service) handled by the virtual server. Possible values = HTTP, SSL, NNTP, HDX
ipv46	Read-write	IPv4 or IPv6 address of the cache redirection virtual server. Usually a public IP address. Clients send connection requests to this IP address. Note: For a transparent cache redirection virtual server, use an asterisk (*) to specify a wildcard virtual server address.
port	Read-write	Port number of the virtual server. Default value: 80 Minimum value = 1 Maximum value = 65534
ipset	Read-write	The list of IPv4/IPv6 addresses bound to ipset would form a part of listening service on the current cr vserver. Minimum length = 1
range	Read-write	Number of consecutive IP addresses, starting with the address specified by the IPAddress parameter, to include in a range of addresses assigned to this virtual server. Default value: 1 Minimum value = 1 Maximum value = 254
cachetype	Read-write	Mode of operation for the cache redirection virtual server. Available settings function as follows TRANSPARENT - Intercept all traffic flowing to the appliance and apply cache redirection policies to determine whether content should be served from the cache or from the origin server. FORWARD - Resolve the hostname of the incoming request, by using a DNS server, and forward requests for non-cacheable content to the resolved origin servers. Cacheable requests are sent to the configured cache servers. REVERSE - Configure reverse proxy caches for specific origin servers. Incoming traffic directed to the reverse proxy can either be served from a cache server or be sent to the origin server with or without modification to the URL. The default value for cache type is TRANSPARENT if service is HTTP or SSL whereas the default cache type is FORWARD if the service is HDX. Possible values = TRANSPARENT, REVERSE, FORWARD
redirect	Read-write	Type of cache server to which to redirect HTTP requests. Available settings function as follows CACHE - Direct all requests to the cache. POLICY - Apply the cache redirection policy to determine whether the request should be directed to the cache or to the origin. ORIGIN - Direct all requests to the origin server. Default value: POLICY Possible values = CACHE, POLICY, ORIGIN
onpolicymatch	Read-write	Redirect requests that match the policy to either the cache or the origin server, as specified. Note: For this option to work, you must set the cache redirection type to POLICY. Default value: ORIGIN Possible values = CACHE, ORIGIN
redirecturl	Read-write	URL of the server to which to redirect traffic if the cache redirection virtual server configured on the Citrix ADC becomes unavailable. Minimum length = 1 Maximum length = 128
clttimeout	Read-write	Time-out value, in seconds, after which to terminate an idle client connection. Minimum value = 0 Maximum value = 31536000
precedence	Read-write	Type of policy (URL or RULE) that takes precedence on the cache redirection virtual server. Applies only to cache redirection virtual servers that have both URL and RULE based policies. If you specify URL, URL based policies are applied first, in the following order Domain and exact URL Domain, prefix and suffix Domain and suffix Domain and prefix Domain only Exact URL Prefix and suffix Suffix only Prefix only Default If you specify RULE, the rule based policies are applied before URL based policies are applied. Default value: RULE Possible values = RULE, URL
arp	Read-write	Use ARP to determine the destination MAC address. Possible values = ON, OFF
ghost	Read-write	. Possible values = ON, OFF
map	Read-write	Obsolete. Possible values = ON, OFF
format	Read-write	. Possible values = ON, OFF
via	Read-write	Insert a via header in each HTTP request. In the case of a cache miss, the request is redirected from the cache server to the origin server. This header indicates whether the request is being sent from a cache server. Default value: ON Possible values = ON, OFF
cachevserver	Read-write	Name of the default cache virtual server to which to redirect requests (the default target of the cache redirection virtual server). Minimum length = 1
dnsvservername	Read-write	Name of the DNS virtual server that resolves domain names arriving at the forward proxy virtual server. Note: This parameter applies only to forward proxy virtual servers, not reverse or transparent. Minimum length = 1
destinationvserver	Read-write	Destination virtual server for a transparent or forward proxy cache redirection virtual server. Minimum length = 1
domain	Read-write	Default domain for reverse proxies. Domains are configured to direct an incoming request from a specified source domain to a specified target domain. There can be several configured pairs of source and target domains. You can select one pair to be the default. If the host header or URL of an incoming request does not include a source domain, this option sends the request to the specified target domain. Minimum length = 1
sopersistencetimeout	Read-write	Time-out, in minutes, for spillover persistence. Minimum value = 2 Maximum value = 24
sothreshold	Read-write	For CONNECTION (or) DYNAMICCONNECTION spillover, the number of connections above which the virtual server enters spillover mode. For BANDWIDTH spillover, the amount of incoming and outgoing traffic (in Kbps) before spillover. For HEALTH spillover, the percentage of active services (by weight) below which spillover occurs. Minimum value = 1
reuse	Read-write	Reuse TCP connections to the origin server across client connections. Do not set this parameter unless the Service Type parameter is set to HTTP. If you set this parameter to OFF, the possible settings of the Redirect parameter function as follows CACHE - TCP connections to the cache servers are not reused. ORIGIN - TCP connections to the origin servers are not reused. POLICY - TCP connections to the origin servers are not reused. If you set the Reuse parameter to ON, connections to origin servers and connections to cache servers are reused. Default value: ON Possible values = ON, OFF
state	Read-write	Initial state of the cache redirection virtual server. Default value: ENABLED Possible values = ENABLED, DISABLED
downstateflush	Read-write	Perform delayed cleanup of connections to this virtual server. Default value: ENABLED Possible values = ENABLED, DISABLED
backupvserver	Read-write	Name of the backup virtual server to which traffic is forwarded if the active server becomes unavailable. Minimum length = 1
disableprimaryondown	Read-write	Continue sending traffic to a backup virtual server even after the primary virtual server comes UP from the DOWN state. Default value: DISABLED Possible values = ENABLED, DISABLED
l2conn	Read-write	Use L2 parameters, such as MAC, VLAN, and channel to identify a connection. Possible values = ON, OFF
backendssl	Read-write	Decides whether the backend connection made by Citrix ADC to the origin server will be HTTP or SSL. Applicable only for SSL type CR Forward proxy vserver. Default value: DISABLED Possible values = ENABLED, DISABLED
listenpolicy	Read-write	String specifying the listen policy for the cache redirection virtual server. Can be either an in-line expression or the name of a named expression. Default value: “NONE”
listenpriority	Read-write	Priority of the listen policy specified by the Listen Policy parameter. The lower the number, higher the priority. Default value: 101 Minimum value = 0 Maximum value = 100
tcpprofilename	Read-write	Name of the profile containing TCP configuration information for the cache redirection virtual server. Minimum length = 1 Maximum length = 127
httpprofilename	Read-write	Name of the profile containing HTTP configuration information for cache redirection virtual server. Minimum length = 1 Maximum length = 127
comment	Read-write	Comments associated with this virtual server. Maximum length = 256
srcipexpr	Read-write	Expression used to extract the source IP addresses from the requests originating from the cache. Can be either an in-line expression or the name of a named expression. Minimum length = 1 Maximum length = 1500
originusip	Read-write	Use the client’s IP address as the source IP address in requests sent to the origin server. Note: You can enable this parameter to implement fully transparent CR deployment. Possible values = ON, OFF
useportrange	Read-write	Use a port number from the port range (set by using the set ns param command, or in the Create Virtual Server (Cache Redirection) dialog box) as the source port in the requests sent to the origin server. Default value: OFF Possible values = ON, OFF
appflowlog	Read-write	Enable logging of AppFlow information. Default value: ENABLED Possible values = ENABLED, DISABLED
netprofile	Read-write	Name of the network profile containing network configurations for the cache redirection virtual server. Minimum length = 1 Maximum length = 127
icmpvsrresponse	Read-write	Criterion for responding to PING requests sent to this virtual server. If ACTIVE, respond only if the virtual server is available. If PASSIVE, respond even if the virtual server is not available. Default value: PASSIVE Possible values = PASSIVE, ACTIVE
rhistate	Read-write	A host route is injected according to the setting on the virtual servers * If set to PASSIVE on all the virtual servers that share the IP address, the appliance always injects the hostroute. * If set to ACTIVE on all the virtual servers that share the IP address, the appliance injects even if one virtual server is UP. * If set to ACTIVE on some virtual servers and PASSIVE on the others, the appliance, injects even if one virtual server set to ACTIVE is UP. Default value: PASSIVE Possible values = PASSIVE, ACTIVE
useoriginipportforcache	Read-write	Use origin ip/port while forwarding request to the cache. Change the destination IP, destination port of the request came to CR vserver to Origin IP and Origin Port and forward it to Cache. Default value: NO Possible values = YES, NO
tcpprobeport	Read-write	Port number for external TCP probe. NetScaler provides support for external TCP health check of the vserver status over the selected port. This option is only supported for vservers assigned with an IPAddress or ipset. Minimum value = 1 Range 1 - 65535 * in CLI is represented as 65535 in NITRO API
newname	Read-write	New name for the cache redirection virtual server. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at sign (@), equal sign (=), and hyphen (-) characters. If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my name” or ‘my name’). Minimum length = 1
ip	Read-only	.
value	Read-only	The ssl card status for the transparent ssl cr vserver. Possible values = Certkey not bound, SSL feature disabled
ngname	Read-only	Nodegroup devno to which this crvserver belongs to.
type	Read-only	Virtual server type. Possible values = CONTENT, ADDRESS
curstate	Read-only	The state of the cr vserver. Possible values = UP, DOWN, UNKNOWN, BUSY, OUT OF SERVICE, GOING OUT OF SERVICE, DOWN WHEN GOING OUT OF SERVICE, NS_EMPTY_STR, Unknown, DISABLED
status	Read-only	Status.
sc	Read-only	The state of SureConnect the specified virtual server. Possible values = ON, OFF
authentication	Read-only	Authentication. Possible values = ON, OFF
homepage	Read-only	Home page.
rule	Read-only	Rule.
policyname	Read-only	Policies bound to this vserver.
pipolicyhits	Read-only	Number of hits.
servicename	Read-only	Service name.
weight	Read-only	Weight for this service.
targetvserver	Read-only	The CSW target server names.
priority	Read-only	The priority for the policy.
somethod	Read-only	The spillover factor. When the main virtual server reaches this spillover threshold, it will give further traffic to the backupvserver. Possible values = CONNECTION, DYNAMICCONNECTION, BANDWIDTH, HEALTH, NONE
sopersistence	Read-only	The state of spillover persistence. Possible values = ENABLED, DISABLED
lbvserver	Read-only	The Default target server name. Minimum length = 1
bindpoint	Read-only	The bindpoint to which the policy is bound. Possible values = REQUEST, RESPONSE, ICA_REQUEST
invoke	Read-only	Invoke flag.
labeltype	Read-only	The invocation type. Possible values = reqvserver, resvserver, policylabel
labelname	Read-only	Name of the label invoked.
gotopriorityexpression	Read-only	Expression specifying the priority of the next policy which will get evaluated if the current policy rule evaluates to TRUE.
nodefaultbindings	Read-only	to determine if the configuration will have default ssl CIPHER and ECC curve bindings. Default value: NO Possible values = YES, NO
__count	Read-only	count parameter

Operations

(click to see Properties )

ADD
DELETE
UPDATE
UNSET
ENABLE
DISABLE
GET (ALL)
GET
COUNT
RENAME

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:*

Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/crvserver

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"crvserver":{
<b>      "name":<String_value>,
</b>      "td":<Double_value>,
<b>      "servicetype":<String_value>,
</b>      "ipv46":<String_value>,
      "port":<Integer_value>,
      "ipset":<String_value>,
      "range":<Double_value>,
      "cachetype":<String_value>,
      "redirect":<String_value>,
      "onpolicymatch":<String_value>,
      "redirecturl":<String_value>,
      "clttimeout":<Double_value>,
      "precedence":<String_value>,
      "arp":<String_value>,
      "ghost":<String_value>,
      "map":<String_value>,
      "format":<String_value>,
      "via":<String_value>,
      "cachevserver":<String_value>,
      "dnsvservername":<String_value>,
      "destinationvserver":<String_value>,
      "domain":<String_value>,
      "sopersistencetimeout":<Double_value>,
      "sothreshold":<Double_value>,
      "reuse":<String_value>,
      "state":<String_value>,
      "downstateflush":<String_value>,
      "backupvserver":<String_value>,
      "disableprimaryondown":<String_value>,
      "l2conn":<String_value>,
      "backendssl":<String_value>,
      "listenpolicy":<String_value>,
      "listenpriority":<Double_value>,
      "tcpprofilename":<String_value>,
      "httpprofilename":<String_value>,
      "comment":<String_value>,
      "srcipexpr":<String_value>,
      "originusip":<String_value>,
      "useportrange":<String_value>,
      "appflowlog":<String_value>,
      "netprofile":<String_value>,
      "icmpvsrresponse":<String_value>,
      "rhistate":<String_value>,
      "useoriginipportforcache":<String_value>,
      "tcpprobeport":<Integer_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/crvserver/ name_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/crvserver

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"crvserver":{
<b>      "name":<String_value>,
</b>      "ipv46":<String_value>,
      "ipset":<String_value>,
      "redirect":<String_value>,
      "onpolicymatch":<String_value>,
      "precedence":<String_value>,
      "arp":<String_value>,
      "via":<String_value>,
      "cachevserver":<String_value>,
      "dnsvservername":<String_value>,
      "destinationvserver":<String_value>,
      "domain":<String_value>,
      "reuse":<String_value>,
      "backupvserver":<String_value>,
      "disableprimaryondown":<String_value>,
      "redirecturl":<String_value>,
      "clttimeout":<Double_value>,
      "downstateflush":<String_value>,
      "l2conn":<String_value>,
      "backendssl":<String_value>,
      "listenpolicy":<String_value>,
      "listenpriority":<Double_value>,
      "tcpprofilename":<String_value>,
      "httpprofilename":<String_value>,
      "netprofile":<String_value>,
      "comment":<String_value>,
      "srcipexpr":<String_value>,
      "originusip":<String_value>,
      "useportrange":<String_value>,
      "appflowlog":<String_value>,
      "icmpvsrresponse":<String_value>,
      "rhistate":<String_value>,
      "useoriginipportforcache":<String_value>,
      "tcpprobeport":<Integer_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/crvserver? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"crvserver":{
<b>      "name":<String_value>,
</b>      "cachevserver":true,
      "dnsvservername":true,
      "destinationvserver":true,
      "domain":true,
      "backupvserver":true,
      "clttimeout":true,
      "redirecturl":true,
      "l2conn":true,
      "backendssl":true,
      "originusip":true,
      "useportrange":true,
      "srcipexpr":true,
      "tcpprofilename":true,
      "httpprofilename":true,
      "appflowlog":true,
      "netprofile":true,
      "icmpvsrresponse":true,
      "tcpprobeport":true,
      "ipset":true,
      "redirect":true,
      "onpolicymatch":true,
      "precedence":true,
      "arp":true,
      "via":true,
      "reuse":true,
      "disableprimaryondown":true,
      "downstateflush":true,
      "listenpolicy":true,
      "listenpriority":true,
      "comment":true,
      "rhistate":true,
      "useoriginipportforcache":true
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

enable

URL: http:// <netscaler-ip-address> /nitro/v1/config/crvserver? action=enable

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"crvserver":{
<b>      "name":<String_value>
</b>}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

disable

URL: http:// <netscaler-ip-address> /nitro/v1/config/crvserver? action=disable

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"crvserver":{
<b>      "name":<String_value>
</b>}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

rename

URL: http:// <netscaler-ip-address> /nitro/v1/config/crvserver? action=rename

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"crvserver":{
<b>      "name":<String_value>,
</b><b>      "newname":<String_value>
</b>}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/crvserver

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/crvserver? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/crvserver? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of crvserver resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/crvserver? view=summary

Use this query-parameter to get the summary output of crvserver resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/crvserver? pagesize=#no;pageno=#no

Use this query-parameter to get the crvserver resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "crvserver": [ {
      "name":<String_value>,
      "ip":<String_value>,
      "td":<Double_value>,
      "ipv46":<String_value>,
      "value":<String_value>,
      "port":<Integer_value>,
      "range":<Double_value>,
      "servicetype":<String_value>,
      "ngname":<String_value>,
      "type":<String_value>,
      "curstate":<String_value>,
      "status":<Integer_value>,
      "sc":<String_value>,
      "cachetype":<String_value>,
      "redirect":<String_value>,
      "onpolicymatch":<String_value>,
      "precedence":<String_value>,
      "redirecturl":<String_value>,
      "authentication":<String_value>,
      "homepage":<String_value>,
      "dnsvservername":<String_value>,
      "domain":<String_value>,
      "rule":<String_value>,
      "policyname":<String_value>,
      "pipolicyhits":<Double_value>,
      "servicename":<String_value>,
      "weight":<Double_value>,
      "cachevserver":<String_value>,
      "targetvserver":<String_value>,
      "backupvserver":<String_value>,
      "priority":<Double_value>,
      "clttimeout":<Double_value>,
      "somethod":<String_value>,
      "sopersistence":<String_value>,
      "sopersistencetimeout":<Double_value>,
      "sothreshold":<Double_value>,
      "reuse":<String_value>,
      "arp":<String_value>,
      "destinationvserver":<String_value>,
      "via":<String_value>,
      "downstateflush":<String_value>,
      "disableprimaryondown":<String_value>,
      "l2conn":<String_value>,
      "backendssl":<String_value>,
      "comment":<String_value>,
      "listenpolicy":<String_value>,
      "listenpriority":<Double_value>,
      "tcpprofilename":<String_value>,
      "httpprofilename":<String_value>,
      "srcipexpr":<String_value>,
      "originusip":<String_value>,
      "useportrange":<String_value>,
      "appflowlog":<String_value>,
      "netprofile":<String_value>,
      "icmpvsrresponse":<String_value>,
      "rhistate":<String_value>,
      "lbvserver":<String_value>,
      "bindpoint":<String_value>,
      "invoke":<Boolean_value>,
      "labeltype":<String_value>,
      "labelname":<String_value>,
      "gotopriorityexpression":<String_value>,
      "ipset":<String_value>,
      "nodefaultbindings":<String_value>,
      "useoriginipportforcache":<String_value>,
      "tcpprobeport":<Integer_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/crvserver/ name_value<String>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/crvserver/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/crvserver/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of crvserver resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "crvserver": [ {
      "name":<String_value>,
      "ip":<String_value>,
      "td":<Double_value>,
      "ipv46":<String_value>,
      "value":<String_value>,
      "port":<Integer_value>,
      "range":<Double_value>,
      "servicetype":<String_value>,
      "ngname":<String_value>,
      "type":<String_value>,
      "curstate":<String_value>,
      "status":<Integer_value>,
      "sc":<String_value>,
      "cachetype":<String_value>,
      "redirect":<String_value>,
      "onpolicymatch":<String_value>,
      "precedence":<String_value>,
      "redirecturl":<String_value>,
      "authentication":<String_value>,
      "homepage":<String_value>,
      "dnsvservername":<String_value>,
      "domain":<String_value>,
      "rule":<String_value>,
      "policyname":<String_value>,
      "pipolicyhits":<Double_value>,
      "servicename":<String_value>,
      "weight":<Double_value>,
      "cachevserver":<String_value>,
      "targetvserver":<String_value>,
      "backupvserver":<String_value>,
      "priority":<Double_value>,
      "clttimeout":<Double_value>,
      "somethod":<String_value>,
      "sopersistence":<String_value>,
      "sopersistencetimeout":<Double_value>,
      "sothreshold":<Double_value>,
      "reuse":<String_value>,
      "arp":<String_value>,
      "destinationvserver":<String_value>,
      "via":<String_value>,
      "downstateflush":<String_value>,
      "disableprimaryondown":<String_value>,
      "l2conn":<String_value>,
      "backendssl":<String_value>,
      "comment":<String_value>,
      "listenpolicy":<String_value>,
      "listenpriority":<Double_value>,
      "tcpprofilename":<String_value>,
      "httpprofilename":<String_value>,
      "srcipexpr":<String_value>,
      "originusip":<String_value>,
      "useportrange":<String_value>,
      "appflowlog":<String_value>,
      "netprofile":<String_value>,
      "icmpvsrresponse":<String_value>,
      "rhistate":<String_value>,
      "lbvserver":<String_value>,
      "bindpoint":<String_value>,
      "invoke":<Boolean_value>,
      "labeltype":<String_value>,
      "labelname":<String_value>,
      "gotopriorityexpression":<String_value>,
      "ipset":<String_value>,
      "nodefaultbindings":<String_value>,
      "useoriginipportforcache":<String_value>,
      "tcpprobeport":<Integer_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/crvserver? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "crvserver": [ { "__count": "#no"} ] }

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

crvserver

August 17, 2023

Contributed by:

August 17, 2023

Contributed by:

crvserver

Properties

Operations

add

delete

update

unset

enable

disable

rename

get (all)

get

count

In this article