ADC NITRO APIs

ip6tunnel

August 17, 2023

Contributed by:

Configuration for ip6 Tunnel resource.

Properties

(click to see Operations )

Name	Permissions	Description
name	Read-write	Name for the IPv6 Tunnel. Cannot be changed after the service group is created. Must begin with a number or letter, and can consist of letters, numbers, and the @ _ - . (period) : (colon) # and space ( ) characters. Minimum length = 1 Maximum length = 31
remote	Read-write	An IPv6 address of the remote Citrix ADC used to set up the tunnel. Minimum length = 1
local	Read-write	An IPv6 address of the local Citrix ADC used to set up the tunnel.
ownergroup	Read-write	The owner node group in a Cluster for the tunnel. Default value: DEFAULT_NG Minimum length = 1
remoteip	Read-only	The remote IP address or subnet of the tunnel.
type	Read-only	The type of this tunnel.
encapip	Read-only	The effective local IP address of the tunnel. Used as the source of the encapsulated packets.
__count	Read-only	count parameter

Operations

(click to see Properties )

ADD
DELETE
GET (ALL)
GET
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:*

Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/ip6tunnel

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"ip6tunnel":{
<b>      "name":<String_value>,
</b><b>      "remote":<String_value>,
</b><b>      "local":<String_value>,
</b>      "ownergroup":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/ip6tunnel/ name_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/ip6tunnel

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/config/ip6tunnel? args=name: <String_value> ,remote: <String_value>

Use this query-parameter to get ip6tunnel resources based on additional properties.

attrs

http:// <netscaler-ip-address> /nitro/v1/config/ip6tunnel? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/ip6tunnel? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of ip6tunnel resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/ip6tunnel? view=summary

Use this query-parameter to get the summary output of ip6tunnel resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/ip6tunnel? pagesize=#no;pageno=#no

Use this query-parameter to get the ip6tunnel resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "ip6tunnel": [ {
name:<String_value>,remote:<String_value>      "remoteip":<String_value>,
      "local":<String_value>,
      "type":<Double_value>,
      "encapip":<String_value>,
      "ownergroup":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/ip6tunnel/ name_value<String>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/ip6tunnel/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/ip6tunnel/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of ip6tunnel resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "ip6tunnel": [ {
name:<String_value>,remote:<String_value>      "remoteip":<String_value>,
      "local":<String_value>,
      "type":<Double_value>,
      "encapip":<String_value>,
      "ownergroup":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/ip6tunnel? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "ip6tunnel": [ { "__count": "#no"} ] }

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

ip6tunnel

August 17, 2023

Contributed by:

August 17, 2023

Contributed by:

ip6tunnel

Properties

Operations

add

delete

get (all)

get

count

In this article