Developer Documentation
ADC NITRO APIs
Current Release 13.1 13

lsnappsprofile

August 17, 2023
Contributed by: 
C

Configuration for LSN Application Profile resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
appsprofilename Read-write Name for the LSN application profile. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN application profile is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “lsn application profile1” or ‘lsn application profile1’).

Minimum length = 1

Maximum length = 127
transportprotocol Read-write Name of the protocol for which the parameters of this LSN application profile applies.

Possible values = TCP, UDP, ICMP
ippooling Read-write NAT IP address allocation options for sessions associated with the same subscriber. Available options function as follows
  • Paired - The Citrix ADC allocates the same NAT IP address for all sessions associated with the same subscriber. When all the ports of a NAT IP address are used in LSN sessions (for same or multiple subscribers), the Citrix ADC ADC drops any new connection from the subscriber.
  • Random - The Citrix ADC allocates random NAT IP addresses, from the pool, for different sessions associated with the same subscriber. This parameter is applicable to dynamic NAT allocation only. Default value: RANDOM Possible values = PAIRED, RANDOM
    		•
    mapping Read-write Type of LSN mapping to apply to subsequent packets originating from the same subscriber IP address and port. Consider an example of an LSN mapping that includes the mapping of the subscriber IP:port (X:x), NAT IP:port (N:n), and external host IP:port (Y:y). Available options function as follows
  • ENDPOINT-INDEPENDENT - Reuse the LSN mapping for subsequent packets sent from the same subscriber IP address and port (X:x) to any external IP address and port.
  • ADDRESS-DEPENDENT - Reuse the LSN mapping for subsequent packets sent from the same subscriber IP address and port (X:x) to the same external IP address (Y), regardless of the external port.
  • ADDRESS-PORT-DEPENDENT - Reuse the LSN mapping for subsequent packets sent from the same internal IP address and port (X:x) to the same external IP address and port (Y:y) while the mapping is still active. Default value: ADDRESS-PORT-DEPENDENT Possible values = ENDPOINT-INDEPENDENT, ADDRESS-DEPENDENT, ADDRESS-PORT-DEPENDENT
    		•
    filtering Read-write Type of filter to apply to packets originating from external hosts. Consider an example of an LSN mapping that includes the mapping of subscriber IP:port (X:x), NAT IP:port (N:n), and external host IP:port (Y:y). Available options function as follows
  • ENDPOINT INDEPENDENT - Filters out only packets not destined to the subscriber IP address and port X:x, regardless of the external host IP address and port source (Z:z). The Citrix ADC forwards any packets destined to X:x. In other words, sending packets from the subscriber to any external IP address is sufficient to allow packets from any external hosts to the subscriber.
  • ADDRESS DEPENDENT - Filters out packets not destined to subscriber IP address and port X:x. In addition, the ADC filters out packets from Y:y destined for the subscriber (X:x) if the client has not previously sent packets to Y:anyport (external port independent). In other words, receiving packets from a specific external host requires that the subscriber first send packets to that specific external host’s IP address.
  • ADDRESS PORT DEPENDENT (the default) - Filters out packets not destined to subscriber IP address and port (X:x). In addition, the Citrix ADC filters out packets from Y:y destined for the subscriber (X:x) if the subscriber has not previously sent packets to Y:y. In other words, receiving packets from a specific external host requires that the subscriber first send packets first to that external IP address and port. Default value: ADDRESS-PORT-DEPENDENT Possible values = ENDPOINT-INDEPENDENT, ADDRESS-DEPENDENT, ADDRESS-PORT-DEPENDENT
    		•
    tcpproxy Read-write Enable TCP proxy, which enables the Citrix ADC to optimize the TCP traffic by using Layer 4 features.

    Default value: DISABLED

    Possible values = ENABLED, DISABLED
    td Read-write ID of the traffic domain through which the Citrix ADC sends the outbound traffic after performing LSN.



    If you do not specify an ID, the ADC sends the outbound traffic through the default traffic domain, which has an ID of 0.

    Default value: 4095
    l2info Read-write Enable l2info by creating natpcbs for LSN, which enables the Citrix ADC to use L2CONN/MBF with LSN.

    Default value: DISABLED

    Possible values = ENABLED, DISABLED
    __count Read-only count parameter

    Operations

    (click to see Properties )

    • ADD
    • DELETE
    • UPDATE
    • UNSET
    • GET (ALL)
    • GET
    • COUNT

    Some options that you can use for each operations:

    • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

      http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

      If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

    • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

      To do this, you must specify the username and password in the request header of the NITRO request as follows:

      X-NITRO-USER: <username>

      X-NITRO-PASS: <password>

      Note: In such cases, make sure that the request header DOES not include the following:

      Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    *Note: *

    Mandatory parameters are marked in red and placeholder content is marked in green

    add

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnappsprofile

    HTTP Method: POST

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload: 

    
{"lsnappsprofile":{
<b>      "appsprofilename":<String_value>,
</b><b>      "transportprotocol":<String_value>,
</b>      "ippooling":<String_value>,
      "mapping":<String_value>,
      "filtering":<String_value>,
      "tcpproxy":<String_value>,
      "td":<Double_value>,
      "l2info":<String_value>
}}

<!--NeedCopy-->

    Response:

    HTTP Status Code on Success: 201 Created

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    delete

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnappsprofile/ appsprofilename_value<String>

    HTTP Method: DELETE

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Response:

    HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    update

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnappsprofile

    HTTP Method: PUT

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload: 

    
{"lsnappsprofile":{
<b>      "appsprofilename":<String_value>,
</b>      "ippooling":<String_value>,
      "mapping":<String_value>,
      "filtering":<String_value>,
      "tcpproxy":<String_value>,
      "td":<Double_value>,
      "l2info":<String_value>
}}

<!--NeedCopy-->

    Response:

    HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    unset

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnappsprofile? action=unset

    HTTP Method: POST

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload: 

    
{"lsnappsprofile":{
<b>      "appsprofilename":<String_value>,
</b>      "ippooling":true,
      "mapping":true,
      "filtering":true,
      "tcpproxy":true,
      "td":true,
      "l2info":true
}}

<!--NeedCopy-->

    Response:

    HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    get (all)

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnappsprofile

    Query-parameters:

    attrs

    http:// <netscaler-ip-address> /nitro/v1/config/lsnappsprofile? attrs=property-name1,property-name2

    Use this query parameter to specify the resource details that you want to retrieve.

    filter

    http:// <netscaler-ip-address> /nitro/v1/config/lsnappsprofile? filter=property-name1:property-val1,property-name2:property-val2

    Use this query-parameter to get the filtered set of lsnappsprofile resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

    view

    http:// <netscaler-ip-address> /nitro/v1/config/lsnappsprofile? view=summary

    Use this query-parameter to get the summary output of lsnappsprofile resources configured on NetScaler.

    Note: By default, the retrieved results are displayed in detail view (?view=detail).

    pagination

    http:// <netscaler-ip-address> /nitro/v1/config/lsnappsprofile? pagesize=#no;pageno=#no

    Use this query-parameter to get the lsnappsprofile resources in chunks.

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response:

    HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload: 

    
{ "lsnappsprofile": [ {
      "appsprofilename":<String_value>,
      "transportprotocol":<String_value>,
      "ippooling":<String_value>,
      "mapping":<String_value>,
      "filtering":<String_value>,
      "tcpproxy":<String_value>,
      "td":<Double_value>,
      "l2info":<String_value>
}]}

<!--NeedCopy-->

    get

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnappsprofile/ appsprofilename_value<String>

    Query-parameters:

    attrs

    http:// <netscaler-ip-address> /nitro/v1/config/lsnappsprofile/ appsprofilename_value<String> ? attrs=property-name1,property-name2

    Use this query parameter to specify the resource details that you want to retrieve.

    view

    http:// <netscaler-ip-address> /nitro/v1/config/lsnappsprofile/ appsprofilename_value<String> ? view=summary

    Use this query-parameter to get the summary output of lsnappsprofile resources configured on NetScaler.

    Note: By default, the retrieved results are displayed in detail view (?view=detail).

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response:

    HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload: 

    
{  "lsnappsprofile": [ {
      "appsprofilename":<String_value>,
      "transportprotocol":<String_value>,
      "ippooling":<String_value>,
      "mapping":<String_value>,
      "filtering":<String_value>,
      "tcpproxy":<String_value>,
      "td":<Double_value>,
      "l2info":<String_value>
}]}

<!--NeedCopy-->

    count

    URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnappsprofile? count=yes

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response:

    HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload: 

    
{ "lsnappsprofile": [ { "__count": "#no"} ] }

<!--NeedCopy-->
    lsnappsprofile
    August 17, 2023
    Contributed by: 
    C
    August 17, 2023
    Contributed by: 
    C

    In this article

    Site feedback | Your privacy choices footer linkYour Privacy Choices | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
    © 1999- Cloud Software Group, Inc. All rights reserved.