Developer Documentation
ADC NITRO APIs
Current Release 13.1 13

authenticationvserver_auditsyslogpolicy_binding

August 17, 2023
Contributed by: 
C

Binding object showing the auditsyslogpolicy that can be bound to authenticationvserver.

Properties

(click to see Operations )

Name Data Type Permissions Description
priority Read-write The priority, if any, of the vpn vserver policy.
bindpoint Read-write Bind point to which to bind the policy. Applies only to rewrite and cache policies. If you do not set this parameter, the policy is bound to REQ_DEFAULT or RES_DEFAULT, depending on whether the policy rule is a response-time or a request-time expression.

Possible values = REQUEST, RESPONSE, ICA_REQUEST, OTHERTCP_REQUEST, AAA_REQUEST
name Read-write Name of the authentication virtual server to which to bind the policy.

Minimum length = 1
nextfactor Read-write Applicable only while binding advance authentication policy as classic authentication policy does not support nFactor.
gotopriorityexpression Read-write Applicable only to advance authentication policy. Expression or other value specifying the next policy to be evaluated if the current policy evaluates to TRUE. Specify one of the following values
  • NEXT - Evaluate the policy with the next higher priority number.
  • END - End policy evaluation.
  • USE_INVOCATION_RESULT - Applicable if this policy invokes another policy label. If the final goto in the invoked policy label has a value of END, the evaluation stops. If the final goto is anything other than END, the current policy label performs a NEXT.
  • An expression that evaluates to a number. If you specify an expression, the number to which it evaluates determines the next policy to evaluate, as follows
  • If the expression evaluates to a higher numbered priority, the policy with that priority is evaluated next.
  • If the expression evaluates to the priority of the current policy, the policy with the next higher numbered priority is evaluated next.
  • If the expression evaluates to a priority number that is numerically higher than the highest numbered priority, policy evaluation ends. An UNDEF event is triggered if
  • The expression is invalid.
  • The expression evaluates to a priority number that is numerically lower than the current policy’s priority.
  • The expression evaluates to a priority number that is between the current policy’s priority number (say, 30) and the highest priority number (say, 100), but does not match any configured priority number (for example, the expression evaluates to the number 85). This example assumes that the priority number increments by 10 for every successive policy, and therefore a priority number of 85 does not exist in the policy label.
    		•
    secondary Read-write Applicable only while bindind classic authentication policy as advance authentication policy use nFactor.
    policy Read-write The name of the policy, if any, bound to the authentication vserver.
    groupextraction Read-write Applicable only while bindind classic authentication policy as advance authentication policy use nFactor.
    __count Read-write count parameter

    Operations

    (click to see Properties )

    • ADD
    • DELETE
    • GET
    • GET (ALL)
    • COUNT

    Some options that you can use for each operations:

    • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

      http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

      If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

    • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

      To do this, you must specify the username and password in the request header of the NITRO request as follows:

      X-NITRO-USER: <username>

      X-NITRO-PASS: <password>

      Note: In such cases, make sure that the request header DOES not include the following:

      Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    *Note: *

    Mandatory parameters are marked in red and placeholder content is marked in green

    add

    URL: http:// <netscaler-ip-address /nitro/v1/config/authenticationvserver_auditsyslogpolicy_binding

    HTTP Method: PUT

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Content-Type:application/json

    Request Payload: 

    
{
"authenticationvserver_auditsyslogpolicy_binding":{
<b>      "name":<String_value>,
</b>      "policy":<String_value>,
      "priority":<Double_value>,
      "secondary":<Boolean_value>,
      "groupextraction":<Boolean_value>,
      "nextfactor":<String_value>,
      "gotopriorityexpression":<String_value>,
      "bindpoint":<String_value>
}}

<!--NeedCopy-->

    Response:

    HTTP Status Code on Success: 201 Created

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    delete

    URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_auditsyslogpolicy_binding/ name_value<String>

    Query-parameters:

    args

    http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_auditsyslogpolicy_binding/ name_value<String> ? args=policy: <String_value> ,secondary: <Boolean_value> ,groupextraction: <Boolean_value> ,bindpoint: <String_value>

    HTTP Method: DELETE

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Response:

    HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    get

    URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_auditsyslogpolicy_binding/ name_value<String>

    Query-parameters:

    filter

    http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_auditsyslogpolicy_binding/ name_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

    Use this query-parameter to get the filtered set of authenticationvserver_auditsyslogpolicy_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

    pagination

    http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_auditsyslogpolicy_binding/ name_value<String> ? pagesize=#no;pageno=#no

    Use this query-parameter to get the authenticationvserver_auditsyslogpolicy_binding resources in chunks.

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response:

    HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload: 

    
{  "authenticationvserver_auditsyslogpolicy_binding": [ {
      "priority":<Double_value>,
      "bindpoint":<String_value>,
      "name":<String_value>,
      "nextfactor":<String_value>,
      "gotopriorityexpression":<String_value>,
      "secondary":<Boolean_value>,
      "policy":<String_value>,
      "groupextraction":<Boolean_value>
}]}

<!--NeedCopy-->

    get (all)

    URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_auditsyslogpolicy_binding

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Query-parameters:

    bulkbindings

    http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_auditsyslogpolicy_binding? bulkbindings=yes

    NITRO allows you to fetch bindings in bulk.

    Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

    Response:

    HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload: 

    
{  "authenticationvserver_auditsyslogpolicy_binding": [ {
      "priority":<Double_value>,
      "bindpoint":<String_value>,
      "name":<String_value>,
      "nextfactor":<String_value>,
      "gotopriorityexpression":<String_value>,
      "secondary":<Boolean_value>,
      "policy":<String_value>,
      "groupextraction":<Boolean_value>
}]}

<!--NeedCopy-->

    count

    URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationvserver_auditsyslogpolicy_binding/ name_value<String> ? count=yes

    HTTP Method: GET

    Request Headers:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

    Accept:application/json

    Response:

    HTTP Status Code on Success: 200 OK

    HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

    Response Header:

    Content-Type:application/json

    Response Payload: 

    
{"authenticationvserver_auditsyslogpolicy_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
    authenticationvserver_auditsyslogpolicy_binding
    August 17, 2023
    Contributed by: 
    C
    August 17, 2023
    Contributed by: 
    C

    In this article

    Site feedback | Your privacy choices footer linkYour Privacy Choices | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
    © 1999- Cloud Software Group, Inc. All rights reserved.