ADC NITRO APIs

botprofile

August 17, 2023

Contributed by:

Configuration for Bot profile resource.

Properties

(click to see Operations )

Name	Data Type	Permissions	Description
name	<String>	Read-write	Name for the profile. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.), pound (#), space ( ), at (@), equals (=), colon (:), and underscore (_) characters. Cannot be changed after the profile is added. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my profile" or 'my profile'). Minimum length = 1 Maximum length = 31
signature	<String>	Read-write	Name of object containing bot static signature details. Minimum length = 1
errorurl	<String>	Read-write	URL that Bot protection uses as the Error URL. Minimum length = 1
trapurl	<String>	Read-write	URL that Bot protection uses as the Trap URL. Minimum length = 1 Maximum length = 127
comment	<String>	Read-write	Any comments about the purpose of profile, or other useful information about the profile. Minimum length = 1
bot_enable_white_list	<String>	Read-write	Enable white-list bot detection. Default value: OFF Possible values = ON, OFF
bot_enable_black_list	<String>	Read-write	Enable black-list bot detection. Default value: OFF Possible values = ON, OFF
bot_enable_rate_limit	<String>	Read-write	Enable rate-limit bot detection. Default value: OFF Possible values = ON, OFF
devicefingerprint	<String>	Read-write	Enable device-fingerprint bot detection. Default value: OFF Possible values = ON, OFF
devicefingerprintaction	<String[]>	Read-write	Action to be taken for device-fingerprint based bot detection. Default value: NONE Possible values = NONE, LOG, DROP, REDIRECT, RESET, MITIGATION
bot_enable_ip_reputation	<String>	Read-write	Enable IP-reputation bot detection. Default value: OFF Possible values = ON, OFF
trap	<String>	Read-write	Enable trap bot detection. Default value: OFF Possible values = ON, OFF
trapaction	<String[]>	Read-write	Action to be taken for bot trap based bot detection. Default value: NONE Possible values = NONE, LOG, DROP, REDIRECT, RESET
bot_enable_tps	<String>	Read-write	Enable TPS. Default value: OFF Possible values = ON, OFF
builtin	<String[]>	Read-only	Flag to determine if bot profille is built-in or not. Possible values = MODIFIABLE, DELETABLE, IMMUTABLE, PARTITION_ALL
feature	<String>	Read-only	The feature to be checked while applying this config.
__count	<Double>	Read-only	count parameter

Operations

(click to see Properties )

ADD
UPDATE
UNSET
DELETE
GET (ALL)
GET
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:*

Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"botprofile":{
<b>      "name":<String_value>,
</b>      "signature":<String_value>,
      "errorurl":<String_value>,
      "trapurl":<String_value>,
      "comment":<String_value>,
      "bot_enable_white_list":<String_value>,
      "bot_enable_black_list":<String_value>,
      "bot_enable_rate_limit":<String_value>,
      "devicefingerprint":<String_value>,
      "devicefingerprintaction":<String[]_value>,
      "bot_enable_ip_reputation":<String_value>,
      "trap":<String_value>,
      "trapaction":<String[]_value>,
      "bot_enable_tps":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"botprofile":{
<b>      "name":<String_value>,
</b>      "signature":<String_value>,
      "errorurl":<String_value>,
      "trapurl":<String_value>,
      "comment":<String_value>,
      "bot_enable_white_list":<String_value>,
      "bot_enable_black_list":<String_value>,
      "bot_enable_rate_limit":<String_value>,
      "devicefingerprint":<String_value>,
      "devicefingerprintaction":<String[]_value>,
      "bot_enable_ip_reputation":<String_value>,
      "trap":<String_value>,
      "trapaction":<String[]_value>,
      "bot_enable_tps":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"botprofile":{
<b>      "name":<String_value>,
</b>      "signature":true,
      "errorurl":true,
      "trapurl":true,
      "comment":true,
      "bot_enable_white_list":true,
      "bot_enable_black_list":true,
      "bot_enable_rate_limit":true,
      "devicefingerprint":true,
      "devicefingerprintaction":true,
      "bot_enable_ip_reputation":true,
      "trap":true,
      "trapaction":true,
      "bot_enable_tps":true
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile/ name_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/botprofile? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/botprofile? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of botprofile resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/botprofile? view=summary

Use this query-parameter to get the summary output of botprofile resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/botprofile? pagesize=#no;pageno=#no

Use this query-parameter to get the botprofile resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "botprofile": [ {
      "name":<String_value>,
      "signature":<String_value>,
      "errorurl":<String_value>,
      "trapurl":<String_value>,
      "comment":<String_value>,
      "builtin":<String[]_value>,
      "feature":<String_value>,
      "bot_enable_white_list":<String_value>,
      "bot_enable_black_list":<String_value>,
      "bot_enable_rate_limit":<String_value>,
      "devicefingerprint":<String_value>,
      "devicefingerprintaction":<String[]_value>,
      "bot_enable_ip_reputation":<String_value>,
      "trap":<String_value>,
      "trapaction":<String[]_value>,
      "bot_enable_tps":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile/ name_value<String>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/botprofile/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/botprofile/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of botprofile resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "botprofile": [ {
      "name":<String_value>,
      "signature":<String_value>,
      "errorurl":<String_value>,
      "trapurl":<String_value>,
      "comment":<String_value>,
      "builtin":<String[]_value>,
      "feature":<String_value>,
      "bot_enable_white_list":<String_value>,
      "bot_enable_black_list":<String_value>,
      "bot_enable_rate_limit":<String_value>,
      "devicefingerprint":<String_value>,
      "devicefingerprintaction":<String[]_value>,
      "bot_enable_ip_reputation":<String_value>,
      "trap":<String_value>,
      "trapaction":<String[]_value>,
      "bot_enable_tps":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "botprofile": [ { "__count": "#no"} ] }

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

botprofile

August 17, 2023

Contributed by:

August 17, 2023

Contributed by:

botprofile

Properties

Operations

add

update

unset

delete

get (all)

get

count

In this article