ADC NITRO APIs

authenticationpolicylabel

August 17, 2023

Contributed by:

Configuration for authentication policy label resource.

Properties

(click to see Operations )

Name	Permissions	Description
labelname	Read-write	Name for the new authentication policy label. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. The following requirement applies only to the Citrix ADC CLI If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, “my authentication policy label” or ‘authentication policy label’).
type	Read-write	Type of feature (aaatm or rba) against which to match the policies bound to this policy label. Default value: AAATM_REQ Possible values = AAATM_REQ, RBA_REQ
comment	Read-write	Any comments to preserve information about this authentication policy label.
loginschema	Read-write	Login schema associated with authentication policy label. Login schema defines the UI rendering by providing customization option of the fields. If user intervention is not needed for a given factor such as group extraction, a loginSchema whose authentication schema is “noschema” should be used.
newname	Read-write	The new name of the auth policy label. Minimum length = 1
numpol	Read-only	Number of polices bound to label.
hits	Read-only	Number of times policy label was invoked.
policyname	Read-only	Name of the authentication policy to bind to the policy label.
priority	Read-only	Specifies the priority of the policy.
gotopriorityexpression	Read-only	Expression specifying the priority of the next policy which will get evaluated if the current policy rule evaluates to TRUE.
flowtype	Read-only	Flowtype of the bound authentication policy.
description	Read-only	Description of the policylabel.
__count	Read-only	count parameter

Operations

(click to see Properties )

ADD
DELETE
RENAME
GET (ALL)
GET
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

To do this, you must specify the username and password in the request header of the NITRO request as follows:

X-NITRO-USER: <username>

X-NITRO-PASS: <password>

Note: In such cases, make sure that the request header DOES not include the following:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note:*

Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicylabel

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"authenticationpolicylabel":{
<b>      "labelname":<String_value>,
</b>      "type":<String_value>,
      "comment":<String_value>,
      "loginschema":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicylabel/ labelname_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

rename

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicylabel? action=rename

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"authenticationpolicylabel":{
<b>      "labelname":<String_value>,
</b><b>      "newname":<String_value>
</b>}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicylabel

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicylabel? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicylabel? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of authenticationpolicylabel resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicylabel? view=summary

Use this query-parameter to get the summary output of authenticationpolicylabel resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicylabel? pagesize=#no;pageno=#no

Use this query-parameter to get the authenticationpolicylabel resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "authenticationpolicylabel": [ {
      "labelname":<String_value>,
      "numpol":<Double_value>,
      "hits":<Double_value>,
      "policyname":<String_value>,
      "priority":<Double_value>,
      "gotopriorityexpression":<String_value>,
      "flowtype":<Double_value>,
      "description":<String_value>,
      "comment":<String_value>,
      "loginschema":<String_value>,
      "type":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicylabel/ labelname_value<String>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicylabel/ labelname_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicylabel/ labelname_value<String> ? view=summary

Use this query-parameter to get the summary output of authenticationpolicylabel resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "authenticationpolicylabel": [ {
      "labelname":<String_value>,
      "numpol":<Double_value>,
      "hits":<Double_value>,
      "policyname":<String_value>,
      "priority":<Double_value>,
      "gotopriorityexpression":<String_value>,
      "flowtype":<Double_value>,
      "description":<String_value>,
      "comment":<String_value>,
      "loginschema":<String_value>,
      "type":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationpolicylabel? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "authenticationpolicylabel": [ { "__count": "#no"} ] }

<!--NeedCopy-->

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

authenticationpolicylabel

August 17, 2023

Contributed by:

August 17, 2023

Contributed by:

authenticationpolicylabel

Properties

Operations

add

delete

rename

get (all)

get

count

In this article